The drive from Redland, MD to Cresaptown, MD covers 122.6 miles and takes about 2h 23m behind the wheel.
This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on I 70, US 40, I 270 for much of the mileage,
and the overall profile is highway-focused drive.
The longest uninterrupted segment is about 52.1 miles on I 70.
At current regular gas prices, budget about $20.33 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Midpoint
61.3 miles from Redland, MD
A natural place for your longest stop of the day
, about 1h 12m into the drive
.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 2h 23m. Total distance: 122.6 miles.
Family Friendly
Moderate complexity with 0 natural rest stops along the way.
Solo Traveler
2h 23m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (92%). Some complex stretches to watch for.
Drive Character
This is a 2h 23m highway drive covering 122.6 miles, with most of the trip on I 70 and US 40. The longest continuous stretch is about 52.1 miles on I 70.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 17 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 70 is the longest continuous segment at about 52.1 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on I 70 and US 40. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 5.1 miles in near I 270.
Driving Effort8/10
Demanding - plan breaks and stay ahead of the key maneuvers
Balances navigation complexity with total wheel time.
This is a demanding drive. With 10 significant decision points across 122.6 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 5.1 miles (I 270): Merge point - match speed before joining. Lane positioning matters here; at 25.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 25.7 miles: Highway fork - watch signs carefully. Lane positioning matters here.
Critical Maneuvers
5 of 10 key points
These are the spots where you need to pay the most attention. Preview them before you drive.
5
5.1 mi into trip|~8m in|I 270
Merge onto I 270
Merge point - match speed before joining. Lane positioning matters here
Use the straight / slight right lanes.
8
25.3 mi into trip|~33m in
Take the exit toward I 70: Hagerstown, Baltimore
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 32
Toward I 70: Hagerstown, Baltimore
7
25.7 mi into trip|~34m in
Keep slight left at fork toward I 70 West: Hagerstown
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight left lane.
Toward I 70 West: Hagerstown
5
26 mi into trip|~34m in|I 70
Merge onto I 70
Merge point - match speed before joining. Lane positioning matters here
Use the straight / slight right lanes.
8
78.1 mi into trip|~1h 30m in|US 40
Keep slight left at fork onto US 40 toward US 40, I 68: Cumberland
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the straight / slight right lanes.
Toward US 40, I 68: Cumberland
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
On the drive from Redland, MD to Cresaptown, MD, road signs begin pointing toward Baltimore along the way.
Baltimore
25.3 mi in|~33m
Main Roads
Road
Distance
Duration
I 70
52.1 mi
55m
US 40
40.9 mi
46m
I 270
20.2 mi
25m
Midcounty Highway
3.1 mi
4m
Winchester Road
2.7 mi
4m
Montgomery Village Avenue
0.8 mi
1m
Shady Grove Road
0.6 mi
1m
Vocke Road Southwest
0.5 mi
<1m
Longest stretch:
I 70
— 52.1 mi, about 55m
Turn-by-Turn Driving Directions
Step-by-step road directions between Redland, MD and Cresaptown, MD.
1
Start on Redland Road
96 ft·9 sec·Redland Road
2
Turn left onto MD 115
0.3 mi·34 sec·Muncaster Mill Road
3
Turn left onto Shady Grove Road
0.6 mi·1 min·Shady Grove Road
Use the left lane.
4
Turn right onto Midcounty Highway
3.1 mi·4 min·Midcounty Highway
5
At end of road, turn left onto MD 124
0.8 mi·1 min·Montgomery Village Avenue
6
Continue on MD 124
0.2 mi·20 sec·Quince Orchard Road
7
Take the ramp
0.2 mi·29 sec
Toward I 270 North
8
Merge onto I 270
20 mi·25 min·I 270
Use the straight / slight right lanes.
9
Take the exit
0.4 mi·30 sec
Exit 32Toward I 70: Hagerstown, BaltimoreUse the slight right lane.
10
Keep slight left at fork
0.4 mi·29 sec
Toward I 70 West: HagerstownUse the slight left lane.
11
Merge onto I 70
52 mi·55 min·I 70
Use the straight / slight right lanes.
12
Keep slight left at fork onto US 40
41 mi·46 min·US 40
Toward US 40, I 68: CumberlandUse the straight / slight right lanes.
13
Take the exit
0.3 mi·34 sec
Exit 40Toward Vocke Road
14
Turn slight right
493 ft·12 sec
15
Turn straight onto MD 658
0.5 mi·51 sec·Vocke Road Southwest
16
Turn left onto MD 53
2.7 mi·4 min·Winchester Road
17
Arrive at destination
Winchester Road Southwest
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 61.3 miles from Redland, MD, or about 1h 12m into the drive.
The longest continuous stretch on this route runs about 52.1 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 27 miles or 36m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 61.3 miles or 1h 12m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 1h 56m
Traffic, exits, and arrival timing usually matter more near Cresaptown, MD than in the middle of the route.
Before You Leave
+
Open the route before leaving Redland, MD so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Redland, MD
This is one driving day of about 122.6 miles and 2h 23m.
Your first comfortable stop window is around 27 miles from Redland, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
The longest stretch is on I 70 for about 52.1 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 61.3 mi from Redland, MD
· 1h 12m into the drive
The midpoint is around 61.3 miles from Redland, MD, which is a good place for a longer meal and fuel stop.
Arriving in Cresaptown, MD
The final approach into Cresaptown, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Cresaptown, MD.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
National Parks Near This Route
Worth a detour if your schedule allows.
Monocacy National Battlefield
National Battlefield
During the summer of 1864, the Confederacy carried out a bold plan to turn the tide of the Civil War in their favor. They planned to capture Washington, DC and influence the election of 1864. On July...
23,000 soldiers were killed, wounded or missing after twelve hours of savage combat on September 17, 1862. The Battle of Antietam ended the Confederate Army of Northern Virginia's first invasion into...
Preserving America's early transportation history, the C&O Canal began as a dream of passage to Western wealth. Operating for nearly 100 years the canal was a lifeline for communities along the Potoma...
The Potomac River corridor is rich in both history and recreation, offering a chance to both explore your heritage and choose your adventure along the way. Start your journey here!
14 mi from route
~35 min detour
Free
near mile 12.7
At the confluence of the Shenandoah and Potomac rivers, on the ancestral home of the Tuscarora and Shawnee people, lies Harpers Ferry. Here you can explore John Brown's Raid against slavery. Find your...
Park data from the National Park Service API. Alerts update every 2 hours.
Fuel & Cost
Regular Gas
$20.33 one way
$40.65 round trip
$4.21/gal25.4 MPG avg43 kg CO2
Fuel Type
$/gal
One Way
Round Trip
midgrade
$4.61
$22.26
$44.52
premium
$4.93
$23.78
$47.55
diesel
$5.61
$27.07
$54.14
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$20
Meals
$25–$50
Total
$45–$70
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 42.9 kg one way.
Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $13 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
36.8
0
$12.87
$5.88
Efficient EV
30.7
0
$10.73
$4.90
EV Truck/SUV
49
0
$17.16
$7.85
Gas CO2
43 kg
EV CO2
14 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 16, 2026
Origin
Redland, MD
Afternoon
in Redland on Thursday
Local time
4:10 PM
EDT
Current temp
75°F
Unavailable
Live forecast
Destination
Cresaptown, MD
Afternoon
in Cresaptown on Thursday
Local time
4:10 PM
EDT
Current temp
88°F
Unavailable
Live forecast
48°F
Hancock, MD
61 mi in
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
13 degrees warmer at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
2h 23m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Redland, MD to Cresaptown, MD covers 122.6 miles and takes about 2h 23m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 70, US 40, I 270. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 61.3 miles from Redland, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $20.33 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 10 significant decision points across 122.6 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 5.1 miles (I 270): Merge point - match speed before joining. Lane positioning matters here; at 25.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 25.7 miles: Highway fork - watch signs carefully. Lane positioning matters here.
On the drive from Redland, MD to Cresaptown, MD, road signs begin pointing toward Baltimore along the way.
Yes. Nearby national parks include Monocacy National Battlefield, Antietam National Battlefield and Chesapeake & Ohio Canal National Historical Park. There are 5 parks within detour distance of this route.
