Skip to main content

Trip from Redland, MD to Adamstown, MD

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

41m

Distance

27.2 mi

44 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$5

one way

EV Charging

Unknown

Best Time to Leave

Save up to 11 min
4 AM
0h 38m ★
6 AM
0h 42m
8 AM
0h 49m
10 AM
0h 44m
12 PM
0h 43m
3 PM
0h 45m
5 PM
0h 48m
8 PM
0h 40m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Redland, MD, MD

Redland, MD

Stepan Vrany

Downtown Adamstown, MD, MD

Adamstown, MD

RDNE Stock project

Trip Overview

The drive from Redland, MD to Adamstown, MD covers 27.2 miles and takes about 41m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on I 270, Fingerboard Road, Midcounty Highway for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 14.3 miles on I 270. At current regular gas prices, budget about $4.51 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 41m. Total distance: 27.2 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

41m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (53%). Some complex stretches to watch for.

Scenic Drive

Mixed drive route profile with national parks nearby.

Drive Character

The drive from Redland, MD to Adamstown, MD covers 27.2 miles and takes about 41m, using a mix of highways and local roads.

Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 16 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 270 is the longest continuous segment at about 14.3 miles.

How Hard Is This Drive?

This route mixes highway mileage with some local-road sections near the start or finish. You will hit about 11 points where you need to pay attention to lane position or signs. The trickiest moment comes early in the drive near MD 115 / Muncaster Mill Road.

Driving Effort 5/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

Balances navigation complexity with total wheel time.

This drive requires moderate attention. Across 27.2 miles you will encounter 11 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: near the start (MD 115 / Muncaster Mill Road): Navigation decision point; at 0.3 miles (Shady Grove Road): Lane positioning matters here; at 5.1 miles (I 270): Merge point - match speed before joining. Lane positioning matters here.

Critical Maneuvers

5 of 11 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
0 mi into trip | ~0m in | MD 115 / Muncaster Mill Road

Turn left onto MD 115 / Muncaster Mill Road

Navigation decision point

4
0.3 mi into trip | ~0m in | Shady Grove Road

Turn left onto Shady Grove Road

Lane positioning matters here

Use the left lane.
5
5.1 mi into trip | ~8m in | I 270

Merge onto I 270

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
8
19.5 mi into trip | ~27m in

Take the exit toward MD 80: Urbana, Buckeystown

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the right lane. Exit 26 Toward MD 80: Urbana, Buckeystown
5
19.9 mi into trip | ~27m in | MD 80 / Fingerboard Road

Enter roundabout onto MD 80 / Fingerboard Road

Roundabout - know your exit number before entering

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Redland, MD to Adamstown, MD, road signs begin pointing toward Buckeystown along the way.

Buckeystown

19.5 mi in | ~27m

Main Roads

Road Distance Duration
I 270 14.3 mi 18m
Fingerboard Road 5 mi 8m
Midcounty Highway 3.1 mi 4m
Adamstown Road 1.8 mi 4m
Montgomery Village Avenue 0.8 mi 1m
Buckeystown Pike 0.6 mi <1m
Shady Grove Road 0.6 mi 1m
Muncaster Mill Road 0.3 mi <1m
Longest stretch: I 270 — 14.3 mi, about 18m

Turn-by-Turn Driving Directions

Step-by-step road directions between Redland, MD and Adamstown, MD.

1

Start on Redland Road

96 ft · 9 sec · Redland Road
2

Turn left onto MD 115

0.3 mi · 34 sec · Muncaster Mill Road
3

Turn left onto Shady Grove Road

0.6 mi · 1 min · Shady Grove Road
Use the left lane.
4

Turn right onto Midcounty Highway

3.1 mi · 4 min · Midcounty Highway
5

At end of road, turn left onto MD 124

0.8 mi · 1 min · Montgomery Village Avenue
6

Continue on MD 124

0.2 mi · 20 sec · Quince Orchard Road
7

Take the ramp

0.2 mi · 29 sec
Toward I 270 North
8

Merge onto I 270

14 mi · 18 min · I 270
Use the straight / slight right lanes.
9

Take the exit

0.2 mi · 25 sec
Exit 26 Toward MD 80: Urbana, Buckeystown Use the right lane.
10

Turn right onto MD 80

0.2 mi · 16 sec · Fingerboard Road
11

Enter roundabout onto MD 80

109 ft · 2 sec · Fingerboard Road
12

Continue on MD 80

4.9 mi · 8 min · Fingerboard Road
13

Turn left onto MD 85

0.6 mi · 56 sec · Buckeystown Pike
14

Turn right onto Adamstown Road

1.8 mi · 4 min · Adamstown Road
15

At end of road, turn left onto Mountville Road

27 ft · 0 sec · Mountville Road
16

Arrive at destination

Mountville Road

Fuel & Cost

Regular Gas

$4.51 one way

$9.02 round trip

$4.21/gal 25.4 MPG avg 10 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $4.94 $9.88
premium $4.93 $5.28 $10.55
diesel $5.61 $6.01 $12.01

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$5

Estimated CO2 emission: 9.5 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 70% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 8.2 0 $2.86 $1.31
Efficient EV 6.8 0 $2.38 $1.09
EV Truck/SUV 10.9 0 $3.81 $1.74

Gas CO2

10 kg

EV CO2

3 kg (70% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 16, 2026

Origin

Redland, MD

Late night in Redland on Friday

Local time

5:25 AM

EDT

Current temp

75°F

Unavailable

Live forecast

Destination

Adamstown, MD

Late night in Adamstown on Friday

Local time

5:25 AM

EDT

Current temp

76°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

1 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

41m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Redland, MD to Adamstown, MD covers 27.2 miles and takes about 41m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are I 270, Fingerboard Road, Midcounty Highway. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 13.6 miles from Redland, MD. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $4.51 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

This drive requires moderate attention. Across 27.2 miles you will encounter 11 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

The main spots that need attention: near the start (MD 115 / Muncaster Mill Road): Navigation decision point; at 0.3 miles (Shady Grove Road): Lane positioning matters here; at 5.1 miles (I 270): Merge point - match speed before joining. Lane positioning matters here.

On the drive from Redland, MD to Adamstown, MD, road signs begin pointing toward Buckeystown along the way.

Yes. Nearby national parks include Monocacy National Battlefield, Chesapeake & Ohio Canal National Historical Park and Potomac Heritage National Scenic Trail. There are 5 parks within detour distance of this route.

How this page is built

Compiled and maintained by the Trip.ovh planning team at COD Solutions Oy (Helsinki). Each route is built from authoritative open government and mapping datasets rather than crowdsourced reviews. Distances and geometry come from OSRM over OpenStreetMap. Fuel cost uses EIA weekly regional averages. National park proximity is from the NPS API. Pages are published only after passing our data-quality checks; our methodology page documents refresh cadence, editorial standards, and known limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Redland, MD or browse trips ending in Adamstown, MD.

Looking for more statewide routes? Browse MD road trips.