Origin
Riverside, MI
Morning in Riverside on Monday
Local time
10:15 AM
EDT
Current temp
65°F
Unavailable
Live forecast
Trip from Riverside, MI to Clinton Township, MI
Drive Time
3h 14m
Distance
199.7 mi
321 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$30
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
3h 3m
★
6 AM
3h 15m
8 AM
3h 39m
10 AM
3h 23m
12 PM
3h 21m
3 PM
3h 24m
5 PM
3h 37m
8 PM
3h 8m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Riverside, MI
Birka Ollyk
Clinton Township, MI
fish socks
Trip Overview
The drive from Riverside, MI to Clinton Township, MI covers 199.7 miles and takes about 3h 14m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on Coloma Road, I-94 EAST, I 94 for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $30.33 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
1 planned break
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
99.8 miles from Riverside, MI
A natural place for your longest stop of the day , about 1h 37m into the drive .
Drive Character
Expect a 3h 14m drive with frequent turns across 199.7 miles of local and secondary roads.
This route has more turning and local-road decision points than a simple highway run.
There are about 28 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Coloma Road is one of the defining roads on this drive.
How Hard Is This Drive?
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive.
Route Complexity
1/10
Very easy - short and simple to drive
The drive from Riverside, MI to Clinton Township, MI is easy. At 3h 14m with 0% highway, most drivers will find it relaxed and low-stress.
Where does it get tricky?
This route does not have any notably tricky sections. Most of the drive from Riverside, MI to Clinton Township, MI is straightforward, with well-signed roads and simple exits.
Main Roads
| Road | Distance | Duration |
|---|---|---|
| Coloma Road | Unavailable | Refreshing |
| I-94 EAST | Unavailable | Refreshing |
| I 94 | Unavailable | Refreshing |
| M 14 | Unavailable | Refreshing |
| US 23 South | Unavailable | Refreshing |
| M 14 East | Unavailable | Refreshing |
| Jeffries Freeway (Express) | Unavailable | Refreshing |
| Davison Avenue | Unavailable | Refreshing |
Per-road distance and duration are being refreshed from OSRM for this route.
Longest stretch:
Coloma Road
— detailed segment metrics are refreshing.
Turn-by-Turn Driving Directions
Step-by-step road directions between Riverside, MI and Clinton Township, MI.
1
Start on Riverside Road
0.3 mi
·
39 sec
·
Riverside Road
2
Turn right onto Coloma Road
423 ft
·
13 sec
·
Coloma Road
3
Take the ramp left
0.2 mi
·
28 sec
4
Merge slight left
3.3 mi
·
3 min
5
Take the exit slight left toward I-94 EAST: Detroit
1.0 mi
·
2 min
·
I-94 EAST: Detroit
6
Merge slight left onto I 94: Detroit
137 mi
·
2 hr 26 min
·
I 94: Detroit
7
Keep slight left to continue on M 14: Plymouth
4.7 mi
·
5 min
·
M 14: Plymouth
8
Keep right to continue on M 14 East, US 23 South: Plymouth
2.4 mi
·
2 min
·
M 14 East, US 23 South: Plymouth
9
Keep slight left to continue on M 14 East: Plymouth, Livonia
15 mi
·
16 min
·
M 14 East: Plymouth, Livonia
10
Continue straight
9.2 mi
·
9 min
11
Keep slight left to continue on Jeffries Freeway (Express)
5.3 mi
·
5 min
·
Jeffries Freeway (Express)
12
Take the exit slight right toward Davison Avenue
0.3 mi
·
37 sec
·
Davison Avenue
13
Continue straight
2.2 mi
·
5 min
14
Continue on Davison Freeway
1.3 mi
·
1 min
·
Davison Freeway
15
Take the exit slight right toward I 75: Flint, Toledo
0.4 mi
·
56 sec
·
I 75: Flint, Toledo
16
Keep slight left to continue on I 75 North: Flint
0.4 mi
·
56 sec
·
I 75 North: Flint
17
Merge slight left onto North Walter P. Chrysler Freeway
4.6 mi
·
4 min
·
North Walter P. Chrysler Freeway
18
Take the exit slight right toward I 696: Lansing, Port Huron
0.2 mi
·
25 sec
·
I 696: Lansing, Port Huron
19
Keep slight right to continue on I-75 North to I-696 East
0.4 mi
·
52 sec
·
I-75 North to I-696 East
20
Continue on Walter P Reuther Freeway
6.8 mi
·
7 min
·
Walter P Reuther Freeway
21
Take the exit slight right toward M 97: Groesbeck Highway
0.2 mi
·
30 sec
·
M 97: Groesbeck Highway
22
Turn straight onto East 11 Mile Road
0.5 mi
·
1 min
·
East 11 Mile Road
23
Turn left onto Groesbeck Highway
7.4 mi
·
12 min
·
Groesbeck Highway
24
Turn left onto Harrington Street
0.6 mi
·
1 min
·
Harrington Street
25
At the end of the road, turn left onto Moravian Drive
0.1 mi
·
17 sec
·
Moravian Drive
26
Turn right onto White Oaks Drive
0.2 mi
·
53 sec
·
White Oaks Drive
27
Turn right onto Red Oaks Drive
289 ft
·
13 sec
·
Red Oaks Drive
28
Arrive at your destination
Trip Plan
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 99.8 miles from Riverside, MI, or about 1h 37m into the drive.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 80 miles or 1h 18m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 99.8 miles or 1h 37m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 2h 39m
Traffic, exits, and arrival timing usually matter more near Clinton Township, MI than in the middle of the route.
Before You Leave
+
Open the route before leaving Riverside, MI so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Riverside, MI
This is one driving day of about 199.7 miles and 3h 14m.
Your first comfortable stop window is around 80 miles from Riverside, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 99.8 mi from Riverside, MI · 1h 37m into the drive
Mid-route town
Meal stop
100 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 80 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 99.8 miles from Riverside, MI, which is a good place for a longer meal and fuel stop.
Arriving in Clinton Township, MI
The final approach into Clinton Township, MI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Clinton Township, MI.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$30.33 one way
$60.66 round trip
$3.86/gal
25.4 MPG avg
70 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.25 | $33.44 | $66.88 |
| premium | $4.80 | $37.70 | $75.40 |
| diesel | $5.64 | $44.37 | $88.73 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$30
Meals
$25–$50
Total
$55–$80
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 69.9 kg one way. Prices: EIA weekly data, 2026-04-06.
Driving Electric?
About $21 in charging · 0 stops · 67% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 59.9 | 0 | $20.97 | $9.59 |
| Efficient EV | 49.9 | 0 | $17.47 | $7.99 |
| EV Truck/SUV | 79.9 | 0 | $27.96 | $12.78 |
Gas CO2
70 kg
EV CO2
23 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Clinton Township, MI
Morning in Clinton Township on Monday
Local time
10:15 AM
EDT
Current temp
48°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
17 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
3h 14m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Riverside, MI to Clinton Township, MI covers 199.7 miles and takes about 3h 14m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Coloma Road, I-94 EAST, I 94. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 99.8 miles from Riverside, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $30.33 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
The drive from Riverside, MI to Clinton Township, MI is easy. At 3h 14m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Riverside, MI to Clinton Township, MI is straightforward, with well-signed roads and simple exits.
The route from Riverside, MI to Clinton Township, MI does not surface many named destination signs beyond the main corridor.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Clinton Township, MI
More trips to Clinton Township, MI
Explore more options from Riverside, MI or browse trips ending in Clinton Township, MI.
Looking for more statewide routes? Browse MI road trips.
Explore maps for Riverside, MI or Clinton Township, MI on MapSof.net.