Origin
Riverside, OH
Afternoon in Riverside on Wednesday
Local time
3:24 PM
EDT
Current temp
68°F
Unavailable
Live forecast
Trip from Riverside, OH to City of Springdale, OH
Data updated 1 hour ago
Drive Time
36m
Distance
22.5 mi
36 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$3
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
0h 34m
★
6 AM
0h 37m
8 AM
0h 43m
10 AM
0h 39m
12 PM
0h 38m
3 PM
0h 39m
5 PM
0h 42m
8 PM
0h 35m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Riverside, OH
Roman Verton
City of Springdale, OH
Ira Bowman
Trip Overview
The drive from Riverside, OH to City of Springdale, OH covers 22.5 miles and takes about 36m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on Mill Creek Expressway, River Road, East Sharon Road for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 13.6 miles on Mill Creek Expressway. At current regular gas prices, budget about $3.49 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
11.2 miles from Riverside, OH
A natural place for your longest stop of the day , about 17m into the drive .
Loading map...
Drive Character
This is a 36m highway drive covering 22.5 miles, with most of the trip on Mill Creek Expressway and River Road. The longest continuous stretch is about 13.6 miles on Mill Creek Expressway.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 22 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Mill Creek Expressway is the longest continuous segment at about 13.6 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on Mill Creek Expressway and River Road. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 4.3 miles in.
Route Complexity
7/10
Demanding - plan breaks and stay ahead of the key maneuvers
This is a demanding drive. With 13 significant decision points across 22.5 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 4.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 4.4 miles: Highway fork - watch signs carefully. Lane positioning matters here; at 4.5 miles: Lane positioning matters here.
Critical Maneuvers
5 of 13 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
6
4.3 mi into trip
|
~7m in
Take the exit toward Freeman Avenue
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the slight right lane.
Toward Freeman Avenue
8
4.4 mi into trip
|
~7m in
Keep slight right at fork toward Freeman Avenue
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight left / slight right lanes.
Toward Freeman Avenue
7
4.5 mi into trip
|
~8m in
Turn right toward Freeman Avenue North
Lane positioning matters here
Use the straight / slight right lanes.
Toward Freeman Avenue North
8
18.9 mi into trip
|
~28m in
Take the exit toward Sharon Road, Glendale, Sharonville
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 15
Toward Sharon Road, Glendale, Sharonville
7
22.2 mi into trip
|
~35m in
|
Lawnview Avenue
Turn right onto Lawnview Avenue
Lane positioning matters here
Use the right lane.
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Riverside, OH and City of Springdale, OH, road signs point toward Freeman Avenue North, Glendale and Sharonville.
Freeman Avenue North
4.5 mi in
|
~8m
Glendale
18.9 mi in
|
~28m
Sharonville
18.9 mi in
|
~28m
Main Roads
| Road | Distance | Duration |
|---|---|---|
| Mill Creek Expressway | 13.6 mi | 18m |
| River Road | 3.6 mi | 6m |
| East Sharon Road | 1.6 mi | 3m |
| Freeman Avenue | 0.4 mi | 1m |
| Princeton Pike | 0.4 mi | <1m |
| West 6th Street | 0.4 mi | <1m |
| Jake Sweeney Place | 0.3 mi | <1m |
| Congress Avenue | 0.3 mi | <1m |
Longest stretch:
Mill Creek Expressway
— 13.6 mi, about 18m
Turn-by-Turn Driving Directions
Step-by-step road directions between Riverside, OH and City of Springdale, OH.
1
Start on River Road
0.1 mi
·
25 sec
·
River Road
2
Continue on River Road
104 ft
·
9 sec
·
River Road
3
Continue on US 50
3.5 mi
·
6 min
·
River Road
4
Continue on US 50; SR 264
0.3 mi
·
20 sec
·
6th Street Viaduct
5
Continue on US 50; SR 264
0.4 mi
·
22 sec
·
West 6th Street
6
Take the exit
0.1 mi
·
18 sec
Toward Freeman Avenue
Use the slight right lane.
7
Keep slight right at fork
484 ft
·
20 sec
Toward Freeman Avenue
Use the slight left / slight right lanes.
8
Turn right
245 ft
·
6 sec
Toward Freeman Avenue North
Use the straight / slight right lanes.
9
Continue on Freeman Avenue
0.4 mi
·
1 min
·
Freeman Avenue
Use the left lane.
10
Continue on Winchell Avenue
469 ft
·
11 sec
·
Winchell Avenue
11
Take the ramp
0.2 mi
·
26 sec
Toward I 75 North: Dayton
12
Merge onto I 75
14 mi
·
18 min
·
Mill Creek Expressway
Use the straight / slight left lanes.
13
Take the exit
0.3 mi
·
51 sec
Exit 15
Toward Sharon Road, Glendale, Sharonville
Use the slight right lane.
14
Turn left onto East Sharon Road
1.6 mi
·
3 min
·
East Sharon Road
Use the straight lane.
15
Turn right onto SR 747
0.3 mi
·
32 sec
·
Congress Avenue
Use the straight / right lanes.
16
Continue on SR 747
0.4 mi
·
56 sec
·
Princeton Pike
17
Turn left onto Tri-County Parkway
0.1 mi
·
20 sec
·
Tri-County Parkway
Use the left lane.
18
Turn right onto Jake Sweeney Place
0.3 mi
·
48 sec
·
Jake Sweeney Place
19
Turn left onto West Kemper Road
0.3 mi
·
39 sec
·
West Kemper Road
Use the left lane.
20
Turn right onto Lawnview Avenue
0.2 mi
·
55 sec
·
Lawnview Avenue
Use the right lane.
21
Turn right onto Balsam Court
292 ft
·
12 sec
·
Balsam Court
22
Arrive at destination
Balsam Court
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 11.2 miles from Riverside, OH, or about 17m into the drive.
The longest continuous stretch on this route runs about 13.6 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 22.5 miles or 36m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 11.2 miles or 17m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 28m
Traffic, exits, and arrival timing usually matter more near City of Springdale, OH than in the middle of the route.
Before You Leave
+
Open the route before leaving Riverside, OH so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Riverside, OH
This is one driving day of about 22.5 miles and 36m.
Your first comfortable stop window is around 80 miles from Riverside, OH.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Mill Creek Expressway for about 13.6 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 11.2 mi from Riverside, OH · 17m into the drive
Mid-route town
Meal stop
11 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 22.5 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 11.2 miles from Riverside, OH, which is a good place for a longer meal and fuel stop.
Arriving in City of Springdale, OH
The final approach into City of Springdale, OH usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around City of Springdale, OH.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$3.49 one way
$6.98 round trip
$3.94/gal
25.4 MPG avg
8 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.38 | $3.88 | $7.75 |
| premium | $4.91 | $4.35 | $8.70 |
| diesel | $5.61 | $4.97 | $9.94 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$3
Meals
$25–$50
Total
$28–$53
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 7.9 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $2 in charging · 0 stops · 63% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 6.8 | 0 | $2.36 | $1.08 |
| Efficient EV | 5.6 | 0 | $1.97 | $0.90 |
| EV Truck/SUV | 9 | 0 | $3.15 | $1.44 |
Gas CO2
8 kg
EV CO2
3 kg (63% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
City of Springdale, OH
Afternoon in City of Springdale on Wednesday
Local time
3:24 PM
EDT
Current temp
80°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
12 degrees warmer at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
36m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Riverside, OH to City of Springdale, OH covers 22.5 miles and takes about 36m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Mill Creek Expressway, River Road, East Sharon Road. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 11.2 miles from Riverside, OH. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $3.49 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 13 significant decision points across 22.5 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 4.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 4.4 miles: Highway fork - watch signs carefully. Lane positioning matters here; at 4.5 miles: Lane positioning matters here.
Between Riverside, OH and City of Springdale, OH, road signs point toward Freeman Avenue North, Glendale and Sharonville.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·