Trip from Riverton, UT to Brigham City, UT

Drive Time

1h 26m

Distance

76.9 mi

Route Type

Turn-heavy local drive

Quick day trip

Trip Overview

The drive from Riverton, UT to Brigham City, UT covers 76.9 miles and takes about 1h 26m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on 12600 South, 12300 South, Veterans Memorial Highway for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $11.79 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

38.5 miles from Riverton, UT

A natural place for your longest stop of the day.

Drive Character

Expect a 1h 26m drive with frequent turns across 76.9 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.

There are about 13 navigation steps in the underlying route data, so the final approach matters more than the middle miles.

12600 South is one of the defining roads on this drive.

Main Roads

Road	Distance	Duration
12600 South	0 mi	0m
12300 South	0 mi	0m
Veterans Memorial Highway	0 mi	0m
US 91	0 mi	0m
1100 South	0 mi	0m
Main Street	0 mi	0m
East 20 South	0 mi	0m

Longest stretch: 12600 South — 0 mi, about 0m

Step-by-Step Directions

1

Start on the route

2

Turn right

3

Turn uturn onto 12600 South

4

Continue on 12300 South

5

Take the ramp slight left

6

Merge slight left onto Veterans Memorial Highway

7

Keep slight left to continue on Veterans Memorial Highway

8

Take the exit slight right toward US 91

9

Keep slight right

10

Merge slight left onto 1100 South

11

Turn left onto Main Street

12

Turn right onto East 20 South

13

Arrive at your destination

When to Leave

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.

You may only need one short stretch break if traffic stays light.

The halfway point lands around 38.5 miles from Riverton, UT.

This is a comfortable same-day trip.

Drive Plan

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 38.5 miles

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Last hour of driving

Traffic, exits, and arrival timing usually matter more near Brigham City, UT than in the middle of the route.

Before You Leave

+

Open the route before leaving Riverton, UT so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Trip Strategy

Day 1

Settle into the route from Riverton, UT

This is one driving day of about 76.9 miles and 1h 26m.

Your first comfortable stop window is around 80 miles from Riverton, UT.

This route can stay practical as a one-day drive if traffic stays reasonable.

You may only need one short stretch stop if conditions stay smooth.

Best Stop Towns on This Route

These towns line up with the pace of this drive and give you clearer places to stop with a purpose.

Late stop town

Meal stop

Farmington, UT

38 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Travel Advice

Arrival Notes

The final approach into Brigham City, UT usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Brigham City, UT.

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Stops Along the Way

Halfway Point

Midpoint

About 38.5 mi from Riverton, UT

Millcreek, UT

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Farmington, UT

Meal break

The midpoint is around 38.5 miles from Riverton, UT, which is a good place for a longer meal and fuel stop.

These stop ideas are pacing suggestions for the drive, so the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Fuel Type	$/gal	One Way	Round Trip
regular	$3.89	$11.79	$23.57
midgrade	$4.23	$12.81	$25.62
premium	$4.55	$13.77	$27.54
diesel	$5.41	$16.39	$32.77

Based on 25.4 MPG average. Estimated CO2 emission: 26.9 kg one way.

Frequently Asked Questions

The drive from Riverton, UT to Brigham City, UT covers 76.9 miles and takes about 1h 26m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are 12600 South, 12300 South, Veterans Memorial Highway. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 38.5 miles from Riverton, UT. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $11.79 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.