Skip to main content

Trip from Sheepshead Bay, NY to Franklin Square, NY

Compiled by the Trip.ovh editorial team · Last recalculated Apr 17, 2026 · Methodology

Drive Time

33m

Distance

19.8 mi

32 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$3

one way

EV Charging

Unknown

Best Time to Leave

Save up to 9 min
4 AM
0h 30m ★
6 AM
0h 33m
8 AM
0h 39m
10 AM
0h 35m
12 PM
0h 35m
3 PM
0h 35m
5 PM
0h 39m
8 PM
0h 31m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

neighborhood in Brooklyn, New York City, New York, United States

Sheepshead Bay, NY

Wikimedia Commons

census-designated place in Nassau County, New York, United States

Franklin Square, NY

Wikimedia Commons

Trip Overview

The drive from Sheepshead Bay, NY to Franklin Square, NY covers 19.8 miles and takes about 33m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Belt Parkway, Elmont Road, Hempstead Turnpike for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 14.5 miles on Belt Parkway. At current regular gas prices, budget about $3.26 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 33m. Total distance: 19.8 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

33m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (84%). Some complex stretches to watch for.

Drive Character

This is a 33m highway drive covering 19.8 miles, with most of the trip on Belt Parkway and Elmont Road. The longest continuous stretch is about 14.5 miles on Belt Parkway.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 13 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Belt Parkway is the longest continuous segment at about 14.5 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on Belt Parkway and Elmont Road. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 1.1 miles in near Knapp Street.

Driving Effort 7/10

Focused - busy navigation packed into a short drive

Balances navigation complexity with total wheel time.

This is a short but busy drive. With 10 decision points packed into just 19.8 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 33m.

Where does it get tricky?

The main spots that need attention: at 1.1 miles (Knapp Street): Lane positioning matters here; at 1.2 miles: Lane positioning matters here. Multiple destination signs - pick the right one; at 1.6 miles (BP / Belt Parkway): Merge point - match speed before joining. Lane positioning matters here.

Critical Maneuvers

5 of 10 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
1.1 mi into trip | ~3m in | Knapp Street

Turn right onto Knapp Street

Lane positioning matters here

Use the straight / right lanes.
7
1.2 mi into trip | ~3m in

Turn left toward Belt Parkway East, Kennedy Airport

Lane positioning matters here. Multiple destination signs - pick the right one

Use the left lane. Toward Belt Parkway East, Kennedy Airport
5
1.6 mi into trip | ~4m in | BP / Belt Parkway

Merge onto BP / Belt Parkway

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
8
16 mi into trip | ~25m in | CI / Cross Island Parkway

Keep slight right at fork onto CI / Cross Island Parkway toward Cross Island Parkway, Whitestone Bridge

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Toward Cross Island Parkway, Whitestone Bridge
9
16.1 mi into trip | ~25m in

Take the exit toward Elmont Road, Linden Boulevard

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 25B Toward Elmont Road, Linden Boulevard

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

Between Sheepshead Bay, NY and Franklin Square, NY, road signs point toward Belt Parkway East and Kennedy Airport.

Belt Parkway East

1.2 mi in | ~3m

Kennedy Airport

1.2 mi in | ~3m

Main Roads

Road Distance Duration
Belt Parkway 14.5 mi 21m
Elmont Road 1.8 mi 3m
Hempstead Turnpike 1.7 mi 3m
Nostrand Avenue 0.4 mi <1m
Shore Parkway 0.4 mi 1m
Avenue Y 0.2 mi 1m
School Road 0.2 mi <1m
Knapp Street <0.1 mi <1m
Longest stretch: Belt Parkway — 14.5 mi, about 21m

Turn-by-Turn Driving Directions

Step-by-step road directions between Sheepshead Bay, NY and Franklin Square, NY.

1

Start on Avenue Y

0.2 mi · 1 min · Avenue Y
2

Turn right onto Nostrand Avenue

0.4 mi · 59 sec · Nostrand Avenue
3

Turn left onto Shore Parkway

0.4 mi · 1 min · Shore Parkway
4

Turn right onto Knapp Street

451 ft · 22 sec · Knapp Street
Use the straight / right lanes.
5

Turn left

0.4 mi · 49 sec
Toward Belt Parkway East, Kennedy Airport Use the left lane.
6

Merge onto BP

14 mi · 21 min · Belt Parkway
Use the straight / slight right lanes.
7

Keep slight right at fork onto CI

419 ft · 5 sec · Cross Island Parkway
Toward Cross Island Parkway, Whitestone Bridge Use the slight right lane.
8

Take the exit

318 ft · 12 sec
Exit 25B Toward Elmont Road, Linden Boulevard Use the straight / slight right lanes.
9

Turn left onto Elmont Road

1.8 mi · 3 min · Elmont Road
10

Turn slight right onto School Road

0.2 mi · 21 sec · School Road
11

Turn right onto NY 24

1.7 mi · 3 min · Hempstead Turnpike
Use the straight / right lanes.
12

Turn right onto Franklin Avenue

52 ft · 1 sec · Franklin Avenue
13

Arrive at destination

Franklin Avenue

Fuel & Cost

Regular Gas

$3.26 one way

$6.52 round trip

$4.18/gal 25.4 MPG avg 7 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.52 $3.52 $7.05
premium $4.92 $3.84 $7.68
diesel $5.61 $4.37 $8.74

Estimated Tolls: $0.12

Hempstead Turnpike (1.7 mi) $0.12

Toll estimates based on average 2024-2025 rates. EZ-Pass/SunPass discounts may lower the actual cost.

Drive Cost (one way)

Fuel

$3

Tolls

$0

Total

$3

Estimated CO2 emission: 6.9 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $2 in charging · 0 stops · 71% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 5.9 0 $2.08 $0.95
Efficient EV 5 0 $1.73 $0.79
EV Truck/SUV 7.9 0 $2.77 $1.27

Gas CO2

7 kg

EV CO2

2 kg (71% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Sheepshead Bay, NY

Late night in Sheepshead Bay on Friday

Local time

2:56 AM

EDT

Current temp

50°F

Unavailable

Live forecast

Destination

Franklin Square, NY

Late night in Franklin Square on Friday

Local time

2:56 AM

EDT

Current temp

46°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

4 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

33m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Sheepshead Bay, NY to Franklin Square, NY covers 19.8 miles and takes about 33m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Belt Parkway, Elmont Road, Hempstead Turnpike. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 9.9 miles from Sheepshead Bay, NY. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $3.26 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a short but busy drive. With 10 decision points packed into just 19.8 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 33m.
The main spots that need attention: at 1.1 miles (Knapp Street): Lane positioning matters here; at 1.2 miles: Lane positioning matters here. Multiple destination signs - pick the right one; at 1.6 miles (BP / Belt Parkway): Merge point - match speed before joining. Lane positioning matters here.
Between Sheepshead Bay, NY and Franklin Square, NY, road signs point toward Belt Parkway East and Kennedy Airport.
Yes. Nearby national parks include Gateway National Recreation Area, African Burial Ground National Monument and Castle Clinton National Monument. There are 6 parks within detour distance of this route.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Sheepshead Bay, NY or browse trips ending in Franklin Square, NY.

Looking for more statewide routes? Browse NY road trips.