Skip to main content

Trip from Sheepshead Bay, NY to Arrochar, NY

Last recalculated Apr 16, 2026

Drive Time

17m

Distance

9.3 mi

15 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$2

one way

Best Time to Leave

4 AM
0h 16m ★
6 AM
0h 17m
8 AM
0h 20m
10 AM
0h 18m
12 PM
0h 18m
3 PM
0h 19m
5 PM
0h 20m
8 PM
0h 17m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

neighborhood in Brooklyn, New York City, New York, United States

Sheepshead Bay, NY

Wikimedia Commons

Downtown Arrochar, NY, NY

Arrochar, NY

Renan Tagliaferro

Trip Overview

The drive from Sheepshead Bay, NY to Arrochar, NY covers 9.3 miles and takes about 17m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Belt Parkway, Verrazzano-Narrows Bridge, Shore Parkway for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 4.5 miles on Belt Parkway. At current regular gas prices, budget about $1.53 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

This drive is short enough that no stops are needed.

Midpoint

4.6 miles from Sheepshead Bay, NY

A natural place for your longest stop of the day , about 8m into the drive .

Drive Character

This is a 17m highway drive covering 9.3 miles, with most of the trip on Belt Parkway and Verrazzano-Narrows Bridge. The longest continuous stretch is about 4.5 miles on Belt Parkway.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 16 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Belt Parkway is the longest continuous segment at about 4.5 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on Belt Parkway and Verrazzano-Narrows Bridge. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 1.1 miles in.

Route Complexity 8/10

Focused - busy navigation packed into a short drive

This is a short but busy drive. With 11 decision points packed into just 9.3 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 17m.

Where does it get tricky?

The main spots that need attention: at 1.1 miles: Lane positioning matters here; at 5.7 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 6.3 miles: Highway fork - watch signs carefully. Lane positioning matters here.

Critical Maneuvers

5 of 11 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

6
1.1 mi into trip | ~3m in

Take the ramp toward Belt Parkway West

Lane positioning matters here

Use the straight / slight left lanes. Toward Belt Parkway West
8
5.7 mi into trip | ~9m in

Take the exit toward I 278 West: Verrazano Bridge, Staten Island

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 3 Toward I 278 West: Verrazano Bridge, Staten Isl...
7
6.3 mi into trip | ~11m in

Keep slight right at fork toward Verrazzano-Narrows Bridge Lower Level

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight right lane. Toward Verrazzano-Narrows Bridge Lower Level
6
8.5 mi into trip | ~15m in

Take the exit toward Narrows Road West, Fingerboard Road

Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one

Exit 15W Toward Narrows Road West, Fingerboard Road
7
8.7 mi into trip | ~15m in | Fingerboard Road

Turn left onto Fingerboard Road

Lane positioning matters here

Use the straight lane.

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

Between Sheepshead Bay, NY and Arrochar, NY, road signs point toward Belt Parkway West, Staten Island, Verrazzano-Narrows Bridge Lower Level and Narrows Road West.

Belt Parkway West

1.1 mi in | ~3m

Staten Island

5.7 mi in | ~9m

Verrazzano-Narrows Bridge Lower Level

6.3 mi in | ~11m

Narrows Road West

8.5 mi in | ~15m

Main Roads

Road Distance Duration
Belt Parkway 4.5 mi 6m
Verrazzano-Narrows Bridge 1.4 mi 2m
Shore Parkway 0.6 mi 1m
Bedford Avenue 0.4 mi 1m
Staten Island Expressway 0.4 mi <1m
Fingerboard Road 0.3 mi 1m
Hylan Boulevard 0.2 mi <1m
Gowanus Expressway 0.1 mi <1m
Longest stretch: Belt Parkway — 4.5 mi, about 6m

Turn-by-Turn Driving Directions

Step-by-step road directions between Sheepshead Bay, NY and Arrochar, NY.

1

Start on Avenue Y

111 ft · 12 sec · Avenue Y
2

Turn left onto Bedford Avenue

0.4 mi · 1 min · Bedford Avenue
3

Turn right onto Shore Parkway

0.5 mi · 1 min · Shore Parkway
4

At end of road, turn left onto Voorhies Avenue

277 ft · 11 sec · Voorhies Avenue
5

Continue on Shore Parkway

443 ft · 10 sec · Shore Parkway
6

Take the ramp

458 ft · 11 sec
Toward Belt Parkway West Use the straight / slight left lanes.
7

Merge onto BP

4.5 mi · 6 min · Belt Parkway
Use the straight / slight right lanes.
8

Take the exit

0.6 mi · 1 min
Exit 3 Toward I 278 West: Verrazano Bridge, Staten Island Use the straight / slight right lanes.
9

Keep slight right at fork

0.4 mi · 48 sec
Toward Verrazzano-Narrows Bridge Lower Level Use the slight right lane.
10

Merge onto I 278

0.1 mi · 9 sec · Gowanus Expressway
11

Continue on I 278

1.4 mi · 2 min · Verrazzano-Narrows Bridge
12

Continue on I 278

0.4 mi · 37 sec · Staten Island Expressway
Use the straight / slight right lanes.
13

Take the exit

0.2 mi · 39 sec
Exit 15W Toward Narrows Road West, Fingerboard Road
14

Turn left onto Fingerboard Road

0.3 mi · 1 min · Fingerboard Road
Use the straight lane.
15

At end of road, turn left onto Hylan Boulevard

0.2 mi · 35 sec · Hylan Boulevard
16

Arrive at destination

Hylan Boulevard

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 4.6 miles from Sheepshead Bay, NY, or about 8m into the drive.
The longest continuous stretch on this route runs about 4.5 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 9 miles or 16m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 4.6 miles or 8m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 14m

Traffic, exits, and arrival timing usually matter more near Arrochar, NY than in the middle of the route.

Before You Leave

+

Have your navigation ready before leaving Sheepshead Bay, NY.

Day 1

Settle into the route from Sheepshead Bay, NY

This is one driving day of about 9.3 miles and 17m.

At 9.3 miles this is a quick drive — no planned stops needed.
The longest stretch is on Belt Parkway for about 4.5 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 4.6 mi from Sheepshead Bay, NY · 8m into the drive

Pacing Suggestions

Staten Island, NY

Fuel and coffee

A short stop after about 9 miles helps settle the day before fatigue starts building.

Brooklyn, NY

Meal break

The midpoint is around 4.6 miles from Sheepshead Bay, NY, which is a good place for a longer meal and fuel stop.

Arriving in Arrochar, NY

Allow a few extra minutes for the final approach into Arrochar, NY if you are unfamiliar with the area.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$1.53 one way

$3.06 round trip

$4.18/gal 25.4 MPG avg 3 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.52 $1.66 $3.31
premium $4.92 $1.80 $3.61
diesel $5.61 $2.05 $4.11

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$2

Meals

$25–$50

Total

$27–$52

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 3.3 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $1 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 2.8 0 $0.98 $0.45
Efficient EV 2.3 0 $0.81 $0.37
EV Truck/SUV 3.7 0 $1.30 $0.60

Gas CO2

3 kg

EV CO2

1 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 14, 2026

Origin

Sheepshead Bay, NY

Night in Sheepshead Bay on Wednesday

Local time

11:57 PM

EDT

Current temp

79°F

Sunny

S 12 mph 5% chance Live forecast

Severe Thunderstorm Warning

Severe Thunderstorm Warning issued April 14 at 3:55PM EDT until April 14 at 4:15PM EDT by NWS Albany NY

Severe Thunderstorm Watch

Severe Thunderstorm Watch issued April 14 at 2:52PM EDT until April 14 at 10:00PM EDT by NWS Buffalo NY

Destination

Arrochar, NY

Night in Arrochar on Wednesday

Local time

11:57 PM

EDT

Current temp

72°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

7 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

17m on the road

The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Sheepshead Bay, NY to Arrochar, NY covers 9.3 miles and takes about 17m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Belt Parkway, Verrazzano-Narrows Bridge, Shore Parkway. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 4.6 miles from Sheepshead Bay, NY. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $1.53 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a short but busy drive. With 11 decision points packed into just 9.3 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 17m.
The main spots that need attention: at 1.1 miles: Lane positioning matters here; at 5.7 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 6.3 miles: Highway fork - watch signs carefully. Lane positioning matters here.
Between Sheepshead Bay, NY and Arrochar, NY, road signs point toward Belt Parkway West, Staten Island, Verrazzano-Narrows Bridge Lower Level and Narrows Road West.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

More from Sheepshead Bay, NY

Explore more options from Sheepshead Bay, NY or browse trips ending in Arrochar, NY.

Looking for more statewide routes? Browse NY road trips.

Explore maps for Sheepshead Bay, NY or Arrochar, NY on MapSof.net.