The drive from Taylor, MI to Riverview, MI covers 198.5 miles and takes about 3h 43m behind the wheel.
This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on I 96, I 275, US 131 for much of the mileage,
and the overall profile is highway-focused drive.
The longest uninterrupted segment is about 122.7 miles on I 96.
At current regular gas prices, budget about $31.03 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
1 planned break
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
99.3 miles from Taylor, MI
A natural place for your longest stop of the day
, about 1h 50m into the drive
.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 3h 43m. Total distance: 198.5 miles.
Family Friendly
Moderate complexity with 1 natural rest stops along the way.
Solo Traveler
3h 43m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (89%). Some complex stretches to watch for.
Drive Character
This is a 3h 43m highway drive covering 198.5 miles, with most of the trip on I 96 and I 275. The longest continuous stretch is about 122.7 miles on I 96.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 96 is the longest continuous segment at about 122.7 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on I 96 and I 275. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 8.1 miles in.
Driving Effort9/10
High effort - long or complex enough to need steady focus all day
Balances navigation complexity with total wheel time.
This is a demanding drive. With 16 significant decision points across 198.5 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 8.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 8.4 miles: Highway fork - watch signs carefully. Lane positioning matters here; at 101.8 miles (I 96): Highway fork - watch signs carefully. Lane positioning matters here.
Critical Maneuvers
5 of 16 key points
These are the spots where you need to pay the most attention. Preview them before you drive.
8
8.1 mi into trip|~11m in
Take the exit toward I 275: Toledo, Flint
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 194A-B
Toward I 275: Toledo, Flint
8
8.4 mi into trip|~12m in
Keep slight right at fork toward I 275 North: Flint
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight right lane.
Exit 194B
Toward I 275 North: Flint
7
101.8 mi into trip|~1h 52m in|I 96
Keep slight left at fork onto I 96 toward I 96 West: Grand Rapids
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight right lane.
Toward I 96 West: Grand Rapids
8
155.5 mi into trip|~2h 50m in|I 96; M 37
Keep slight right at fork onto I 96; M 37 toward I 96 West, M 37 North: Muskegon
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the straight / slight right lanes.
Toward I 96 West, M 37 North: Muskegon
8
161.1 mi into trip|~2h 56m in
Take the exit toward US 131 North: Cadillac, Big Rapids
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 31B
Toward US 131 North: Cadillac, Big Rapids
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Taylor, MI and Riverview, MI, road signs point toward M 37 North: Muskegon, Big Rapids and Sand Lake.
M 37 North: Muskegon
155.5 mi in|~2h 50m|via I 96; M 37
Big Rapids
161.1 mi in|~2h 56m
Sand Lake
181.6 mi in|~3h 18m
Main Roads
Road
Distance
Duration
I 96
122.7 mi
2h 11m
I 275
29.2 mi
31m
US 131
20.2 mi
21m
Cypress Avenue
8.7 mi
11m
Detroit Industrial Expressway
5.4 mi
5m
22 Mile Road Northeast
4.3 mi
6m
East 72nd Street
2.4 mi
3m
Croton Hardy Drive
1.1 mi
2m
Longest stretch:
I 96
— 122.7 mi, about 2h 11m
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylor, MI and Riverview, MI.
1
Start on Wick Road
1.0 mi·2 min·Wick Road
2
Turn right onto South Beech Daly Road
1.0 mi·1 min·South Beech Daly Road
3
Turn left onto Ecorse Road
0.5 mi·49 sec·Ecorse Road
Use the left lane.
4
Take the ramp
0.2 mi·30 sec
Toward I 94 West: Chicago
5
Merge onto I 94
5.4 mi·5 min·Detroit Industrial Expressway
Use the straight / slight right lanes.
6
Take the exit
0.3 mi·37 sec
Exit 194A-BToward I 275: Toledo, FlintUse the slight right lane.
7
Keep slight right at fork
0.8 mi·1 min
Exit 194BToward I 275 North: FlintUse the slight right lane.
8
Merge onto I 275
29 mi·31 min·I 275
Use the straight / slight right lanes.
9
Continue on I 96
8.6 mi·9 min·I 96
10
Keep slight left at fork onto I 96
55 mi·58 min·I 96
Use the straight / slight right lanes.
11
Keep slight left at fork onto I 96
54 mi·57 min·I 96
Toward I 96 West: Grand RapidsUse the slight right lane.
12
Keep slight right at fork onto I 96; M 37
5.7 mi·6 min·I 96; M 37
Toward I 96 West, M 37 North: MuskegonUse the straight / slight right lanes.
13
Take the exit
0.3 mi·47 sec
Exit 31BToward US 131 North: Cadillac, Big RapidsUse the slight right lane.
14
Merge onto US 131
20 mi·21 min·US 131
Use the slight right lane.
15
Take the exit
0.4 mi·1 min
Toward Sand Lake
16
Turn left onto 22 Mile Road Northeast
4.3 mi·6 min·22 Mile Road Northeast
17
Continue on Cypress Avenue
8.7 mi·11 min·Cypress Avenue
18
Turn left onto East 72nd Street
2.4 mi·3 min·East 72nd Street
19
Turn right onto Croton Hardy Drive
1.1 mi·2 min·Croton Hardy Drive
20
Arrive at destination
Croton Hardy Drive
Trip Plan
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 99.3 miles from Taylor, MI, or about 1h 50m into the drive.
The longest continuous stretch on this route runs about 122.7 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 44 miles or 51m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 99.3 miles or 1h 50m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 2h 58m
Traffic, exits, and arrival timing usually matter more near Riverview, MI than in the middle of the route.
Before You Leave
+
Open the route before leaving Taylor, MI so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Taylor, MI
This is one driving day of about 198.5 miles and 3h 43m.
Your first comfortable stop window is around 44 miles from Taylor, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on I 96 for about 122.7 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 99.3 mi from Taylor, MI
· 1h 50m into the drive
Place data sourced from public business listings. Hours and availability may vary.
Fuel & Cost
Regular Gas
$31.03 one way
$62.07 round trip
$3.97/gal25.4 MPG avg70 kg CO2
Fuel Type
$/gal
One Way
Round Trip
midgrade
$4.36
$34.07
$68.15
premium
$4.89
$38.20
$76.40
diesel
$5.61
$43.83
$87.65
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$31
Meals
$25–$50
Total
$56–$81
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 69.5 kg one way.
Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $21 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
59.6
0
$20.84
$9.53
Efficient EV
49.6
0
$17.37
$7.94
EV Truck/SUV
79.4
0
$27.79
$12.70
Gas CO2
69 kg
EV CO2
23 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 16, 2026
Origin
Taylor, MI
Evening
in Taylor on Thursday
Local time
5:38 PM
EDT
Current temp
73°F
Chance Showers And Thunderstorms
W 13 mph52% chanceLive forecast
Special Weather Statement
Special Weather Statement issued April 16 at 5:16PM EDT by NWS Northern Indiana
Special Weather Statement
Special Weather Statement issued April 16 at 4:59PM EDT by NWS Northern Indiana
Destination
Riverview, MI
Evening
in Riverview on Thursday
Local time
5:38 PM
EDT
Current temp
44°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
29 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
3h 43m on the road
The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Taylor, MI to Riverview, MI covers 198.5 miles and takes about 3h 43m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 96, I 275, US 131. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 99.3 miles from Taylor, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $31.03 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a demanding drive. With 16 significant decision points across 198.5 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 8.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 8.4 miles: Highway fork - watch signs carefully. Lane positioning matters here; at 101.8 miles (I 96): Highway fork - watch signs carefully. Lane positioning matters here.
Between Taylor, MI and Riverview, MI, road signs point toward M 37 North: Muskegon, Big Rapids and Sand Lake.
