The drive from Taylor, MI to Bedford, MI covers 111.4 miles and takes about 2h 7m behind the wheel.
This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on Detroit Industrial Expressway, East Michigan Avenue, State Highway 37 for much of the mileage,
and the overall profile is highway-focused drive.
The longest uninterrupted segment is about 96.1 miles on Detroit Industrial Expressway.
At current regular gas prices, budget about $17.42 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Midpoint
55.7 miles from Taylor, MI
A natural place for your longest stop of the day
, about 1h 2m into the drive
.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 2h 7m. Total distance: 111.4 miles.
Family Friendly
Moderate complexity with 0 natural rest stops along the way.
Solo Traveler
2h 7m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (89%). Some complex stretches to watch for.
Drive Character
This is a 2h 7m highway drive covering 111.4 miles, with most of the trip on Detroit Industrial Expressway and East Michigan Avenue. The longest continuous stretch is about 96.1 miles on Detroit Industrial Expressway.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 18 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Detroit Industrial Expressway is the longest continuous segment at about 96.1 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on Detroit Industrial Expressway and East Michigan Avenue. You will hit about 13 points where you need to pay attention to lane position or signs. The trickiest moment comes around 1 miles in near South Beech Daly Road.
Driving Effort6/10
Moderate - straightforward overall, but long enough or busy enough to require pacing
Balances navigation complexity with total wheel time.
This drive requires moderate attention. Across 111.4 miles you will encounter 13 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
Where does it get tricky?
The main spots that need attention: at 1 miles (South Beech Daly Road): Navigation decision point; at 2 miles (Ecorse Road): Lane positioning matters here; at 2.7 miles (I 94 / Detroit Industrial Expressway): Merge point - match speed before joining. Lane positioning matters here.
Critical Maneuvers
5 of 13 key points
These are the spots where you need to pay the most attention. Preview them before you drive.
4
1 mi into trip|~2m in|South Beech Daly Road
Turn right onto South Beech Daly Road
Navigation decision point
6
2 mi into trip|~4m in|Ecorse Road
Turn left onto Ecorse Road
Lane positioning matters here
Use the left lane.
5
2.7 mi into trip|~5m in|I 94 / Detroit Industrial Expressway
Merge onto I 94 / Detroit Industrial Expressway
Merge point - match speed before joining. Lane positioning matters here
Use the straight / slight right lanes.
6
11.5 mi into trip|~14m in|I 94 / Detroit Industrial Expressway
Keep slight right at fork onto I 94 / Detroit Industrial Expressway
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight / slight right lanes.
5
98.8 mi into trip|~1h 48m in
Take the exit toward M 311, M 96, I 94 BL: Battle Creek
Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one
Toward M 311, M 96, I 94 BL: Battle Creek
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Taylor, MI and Bedford, MI, road signs point toward M 311 and M 96.
M 311
98.8 mi in|~1h 48m
M 96
98.8 mi in|~1h 48m
Main Roads
Road
Distance
Duration
Detroit Industrial Expressway
96.1 mi
1h 42m
East Michigan Avenue
4.8 mi
5m
State Highway 37
2.9 mi
4m
West Michigan Avenue
2.5 mi
4m
South Beech Daly Road
1 mi
1m
Wick Road
1 mi
2m
East Hamblin Avenue
0.8 mi
1m
Bedford Road North
0.7 mi
1m
Longest stretch:
Detroit Industrial Expressway
— 96.1 mi, about 1h 42m
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylor, MI and Bedford, MI.
1
Start on Wick Road
1.0 mi·2 min·Wick Road
2
Turn right onto South Beech Daly Road
1.0 mi·1 min·South Beech Daly Road
3
Turn left onto Ecorse Road
0.5 mi·49 sec·Ecorse Road
Use the left lane.
4
Take the ramp
0.2 mi·30 sec
Toward I 94 West: Chicago
5
Merge onto I 94
8.8 mi·9 min·Detroit Industrial Expressway
Use the straight / slight right lanes.
6
Keep slight right at fork onto I 94
87 mi·1 hr 33 min·Detroit Industrial Expressway
Use the straight / slight right lanes.
7
Take the exit
0.3 mi·33 sec
Toward M 311, M 96, I 94 BL: Battle Creek
8
Continue on Wheatfield Parkway
0.3 mi·31 sec·Wheatfield Parkway
9
Turn right onto I 94 BL; M 96
2.7 mi·3 min·East Michigan Avenue
10
Keep slight right at fork onto I 94 BL
2.1 mi·2 min·East Michigan Avenue
11
Turn left onto I 94 BL
352 ft·6 sec·Hamblin Street
12
Continue on East Hamblin Avenue
0.8 mi·1 min·East Hamblin Avenue
13
Turn right onto M 89
0.2 mi·17 sec·South Washington Avenue
14
Turn left onto M 89
2.5 mi·4 min·West Michigan Avenue
15
Turn right onto M 37
0.7 mi·1 min·Bedford Road North
16
Continue on M 37
2.9 mi·4 min·State Highway 37
17
Turn right onto Hutchinson Road
32 ft·1 sec·Hutchinson Road
18
Arrive at destination
Hutchinson Road
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 55.7 miles from Taylor, MI, or about 1h 2m into the drive.
The longest continuous stretch on this route runs about 96.1 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 25 miles or 29m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 55.7 miles or 1h 2m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 1h 40m
Traffic, exits, and arrival timing usually matter more near Bedford, MI than in the middle of the route.
Before You Leave
+
Open the route before leaving Taylor, MI so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Taylor, MI
This is one driving day of about 111.4 miles and 2h 7m.
Your first comfortable stop window is around 25 miles from Taylor, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
The longest stretch is on Detroit Industrial Expressway for about 96.1 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 55.7 mi from Taylor, MI
· 1h 2m into the drive
The midpoint is around 55.7 miles from Taylor, MI, which is a good place for a longer meal and fuel stop.
Before the longest stretch
Fuel check
Top up before Detroit Industrial Expressway if your tank is already low. That segment runs about 96.1 miles.
Arriving in Bedford, MI
The final approach into Bedford, MI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Bedford, MI.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$17.42 one way
$34.83 round trip
$3.97/gal25.4 MPG avg39 kg CO2
Fuel Type
$/gal
One Way
Round Trip
midgrade
$4.36
$19.12
$38.24
premium
$4.89
$21.44
$42.88
diesel
$5.61
$24.60
$49.19
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$17
Meals
$25–$50
Total
$42–$67
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 39 kg one way.
Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $12 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
33.4
0
$11.70
$5.35
Efficient EV
27.9
0
$9.75
$4.46
EV Truck/SUV
44.6
0
$15.60
$7.13
Gas CO2
39 kg
EV CO2
13 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 18, 2026
Origin
Taylor, MI
Late night
in Taylor on Saturday
Local time
4:52 AM
EDT
Current temp
53°F
Chance Showers And Thunderstorms
SSE 9 to 15 mph74% chanceLive forecast
Severe Thunderstorm Warning
Severe Thunderstorm Warning issued April 18 at 12:05AM EDT until April 18 at 1:30AM EDT by NWS Grand Rapids MI
Special Weather Statement
Special Weather Statement issued April 18 at 12:01AM EDT by NWS Grand Rapids MI
Destination
Bedford, MI
Late night
in Bedford on Saturday
Local time
4:52 AM
EDT
Current temp
47°F
Unavailable
Live forecast
47°F
Jackson, MI
56 mi in
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
6 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
2h 7m on the road
The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Taylor, MI to Bedford, MI covers 111.4 miles and takes about 2h 7m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Detroit Industrial Expressway, East Michigan Avenue, State Highway 37. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 55.7 miles from Taylor, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $17.42 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 111.4 miles you will encounter 13 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: at 1 miles (South Beech Daly Road): Navigation decision point; at 2 miles (Ecorse Road): Lane positioning matters here; at 2.7 miles (I 94 / Detroit Industrial Expressway): Merge point - match speed before joining. Lane positioning matters here.
Between Taylor, MI and Bedford, MI, road signs point toward M 311 and M 96.
