Skip to main content

Trip from Taylor, MI to Brighton, MI

Last recalculated Apr 15, 2026

Drive Time

56m

Distance

47 mi

76 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$7

one way

Best Time to Leave

Save up to 14 min
4 AM
0h 52m ★
6 AM
0h 57m
8 AM
1h 6m
10 AM
1h 0m
12 PM
0h 59m
3 PM
1h 0m
5 PM
1h 6m
8 PM
0h 54m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

city in Michigan, United States

Taylor, MI

Wikimedia Commons

suburb of Detroit, Michigan, United States

Brighton, MI

Wikimedia Commons

Trip Overview

The drive from Taylor, MI to Brighton, MI covers 47 miles and takes about 56m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on I 275, I 96, Detroit Industrial Expressway for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 29.2 miles on I 275. At current regular gas prices, budget about $7.35 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

This drive is short enough that no stops are needed.

Midpoint

23.5 miles from Taylor, MI

A natural place for your longest stop of the day , about 29m into the drive .

Drive Character

This is a 56m highway drive covering 47 miles, with most of the trip on I 275 and I 96. The longest continuous stretch is about 29.2 miles on I 275.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 18 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 275 is the longest continuous segment at about 29.2 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 275 and I 96. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 2 miles in near Ecorse Road.

Route Complexity 10/10

Focused - lots of decisions in a short distance, but it is over quickly

This is a short but busy drive. With 14 decision points packed into just 47 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 56m.

Where does it get tricky?

The main spots that need attention: at 2 miles (Ecorse Road): Lane positioning matters here; at 8.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 8.4 miles: Highway fork - watch signs carefully. Lane positioning matters here.

Critical Maneuvers

5 of 14 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

6
2 mi into trip | ~4m in | Ecorse Road

Turn left onto Ecorse Road

Lane positioning matters here

Use the left lane.
8
8.1 mi into trip | ~11m in

Take the exit toward I 275: Toledo, Flint

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Exit 194A-B Toward I 275: Toledo, Flint
8
8.4 mi into trip | ~12m in

Keep slight right at fork toward I 275 North: Flint

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight right lane. Exit 194B Toward I 275 North: Flint
8
44.4 mi into trip | ~51m in

Take the exit toward US 23 South, US 23 North: Ann Arbor, Spencer Road, Flint

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Exit 148A; 147; 147B Toward US 23 South, US 23 North: Ann Arbor, Spe...
7
45.5 mi into trip | ~52m in

Keep slight right at fork toward Spencer Road, Brighton

Highway fork - watch signs carefully. Multiple destination signs - pick the right one

Exit 147 Toward Spencer Road, Brighton

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

Between Taylor, MI and Brighton, MI, road signs point toward Flint and Ann Arbor.

Flint

8.1 mi in | ~11m

Ann Arbor

44.6 mi in | ~51m

Main Roads

Road Distance Duration
I 275 29.2 mi 31m
I 96 6 mi 6m
Detroit Industrial Expressway 5.4 mi 5m
South Beech Daly Road 1 mi 1m
Wick Road 1 mi 2m
Ecorse Road 0.5 mi <1m
East Main Street 0.5 mi 1m
Spencer Road 0.3 mi <1m
Longest stretch: I 275 — 29.2 mi, about 31m

Turn-by-Turn Driving Directions

Step-by-step road directions between Taylor, MI and Brighton, MI.

1

Start on Wick Road

1.0 mi · 2 min · Wick Road
2

Turn right onto South Beech Daly Road

1.0 mi · 1 min · South Beech Daly Road
3

Turn left onto Ecorse Road

0.5 mi · 49 sec · Ecorse Road
Use the left lane.
4

Take the ramp

0.2 mi · 30 sec
Toward I 94 West: Chicago
5

Merge onto I 94

5.4 mi · 5 min · Detroit Industrial Expressway
Use the straight / slight right lanes.
6

Take the exit

0.3 mi · 37 sec
Exit 194A-B Toward I 275: Toledo, Flint Use the slight right lane.
7

Keep slight right at fork

0.8 mi · 1 min
Exit 194B Toward I 275 North: Flint Use the slight right lane.
8

Merge onto I 275

29 mi · 31 min · I 275
Use the straight / slight right lanes.
9

Continue on I 96

6.0 mi · 6 min · I 96
10

Take the exit

0.2 mi · 11 sec
Exit 148A; 147; 147B Toward US 23 South, US 23 North: Ann Arbor, Spencer Road, Flint Use the slight right lane.
11

Keep slight left at fork

0.6 mi · 45 sec
Toward US 23 South: Spencer Road, Brighton, Ann Arbor
12

Keep slight left at fork

0.3 mi · 24 sec
Toward I 96 West: Lansing, Brighton, Spencer Road
13

Keep slight right at fork

0.6 mi · 1 min
Exit 147 Toward Spencer Road, Brighton
14

Turn right onto Spencer Road

0.3 mi · 36 sec · Spencer Road
Use the straight / right lanes.
15

Continue on Spencer Street

0.2 mi · 28 sec · Spencer Street
16

Turn right onto East Main Street

0.5 mi · 1 min · East Main Street
17

Turn left onto East Grand River Avenue

50 ft · 1 sec · East Grand River Avenue
18

Arrive at destination

East Grand River Avenue

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 23.5 miles from Taylor, MI, or about 29m into the drive.
The longest continuous stretch on this route runs about 29.2 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 10 miles or 14m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 23.5 miles or 29m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 46m

Traffic, exits, and arrival timing usually matter more near Brighton, MI than in the middle of the route.

Before You Leave

+

Have your navigation ready before leaving Taylor, MI.

Day 1

Settle into the route from Taylor, MI

This is one driving day of about 47 miles and 56m.

At 47 miles this is a quick drive — no planned stops needed.
The longest stretch is on I 275 for about 29.2 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 23.5 mi from Taylor, MI · 29m into the drive

city in Michigan, United States

Mid-route town

Meal stop

Northville, MI

24 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Canton, MI

Fuel and coffee

A short stop after about 10 miles helps settle the day before fatigue starts building.

Plymouth, MI

Meal break

The midpoint is around 23.5 miles from Taylor, MI, which is a good place for a longer meal and fuel stop.

Arriving in Brighton, MI

Allow a few extra minutes for the final approach into Brighton, MI if you are unfamiliar with the area.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$7.35 one way

$14.70 round trip

$3.97/gal 25.4 MPG avg 16 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $8.07 $16.14
premium $4.89 $9.04 $18.09
diesel $5.61 $10.38 $20.75

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$7

Meals

$25–$50

Total

$32–$57

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 16.4 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $5 in charging · 0 stops · 69% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 14.1 0 $4.94 $2.26
Efficient EV 11.8 0 $4.11 $1.88
EV Truck/SUV 18.8 0 $6.58 $3.01

Gas CO2

16 kg

EV CO2

5 kg (69% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Taylor, MI

Evening in Taylor on Wednesday

Local time

5:52 PM

EDT

Current temp

49°F

Unavailable

Live forecast

Destination

Brighton, MI

Evening in Brighton on Wednesday

Local time

5:52 PM

EDT

Current temp

43°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

6 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

56m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Taylor, MI to Brighton, MI covers 47 miles and takes about 56m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 275, I 96, Detroit Industrial Expressway. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 23.5 miles from Taylor, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $7.35 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a short but busy drive. With 14 decision points packed into just 47 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 56m.
The main spots that need attention: at 2 miles (Ecorse Road): Lane positioning matters here; at 8.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 8.4 miles: Highway fork - watch signs carefully. Lane positioning matters here.
Between Taylor, MI and Brighton, MI, road signs point toward Flint and Ann Arbor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Brighton, MI to Taylor, MI

Plan the drive back the other way.

46.4 mi 55m

Explore more options from Taylor, MI or browse trips ending in Brighton, MI.

Looking for more statewide routes? Browse MI road trips.

Explore maps for Taylor, MI or Brighton, MI on MapSof.net.