Skip to main content

Trip from Walkertown, NC to Highland Gate, NC

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

30m

Distance

18.1 mi

29 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$3

one way

EV Charging

Unknown

Best Time to Leave

Save up to 8 min
4 AM
0h 28m ★
6 AM
0h 30m
8 AM
0h 36m
10 AM
0h 32m
12 PM
0h 32m
3 PM
0h 32m
5 PM
0h 35m
8 PM
0h 29m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Walkertown, NC, NC

Walkertown, NC

Mark Stebnicki

Downtown Highland Gate, NC, NC

Highland Gate, NC

Mark Stebnicki

Trip Overview

The drive from Walkertown, NC to Highland Gate, NC covers 18.1 miles and takes about 30m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on I 40, Billy Graham Freeway, North Fork Right Fork Road for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 10.3 miles on I 40. At current regular gas prices, budget about $2.83 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 30m. Total distance: 18.1 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

30m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (73%). Some complex stretches to watch for.

Drive Character

This is a 30m highway drive covering 18.1 miles, with most of the trip on I 40 and Billy Graham Freeway. The longest continuous stretch is about 10.3 miles on I 40.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 15 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 40 is the longest continuous segment at about 10.3 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 40 and Billy Graham Freeway. You will hit about 9 points where you need to pay attention to lane position or signs. The trickiest moment comes early in the drive near North Fork Right Fork Road.

Driving Effort 6/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

Balances navigation complexity with total wheel time.

This drive requires moderate attention. Across 18.1 miles you will encounter 9 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: near the start (North Fork Right Fork Road): Navigation decision point; at 14.3 miles (I 240 / Billy Graham Freeway): Highway fork - watch signs carefully. Multiple destination signs - pick the right one; at 17.1 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 9 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
0 mi into trip | ~0m in | North Fork Right Fork Road

Turn right onto North Fork Right Fork Road

Navigation decision point

6
14.3 mi into trip | ~23m in | I 240 / Billy Graham Freeway

Keep slight right at fork onto I 240 / Billy Graham Freeway toward I 240, US 74A: West Asheville

Highway fork - watch signs carefully. Multiple destination signs - pick the right one

Toward I 240, US 74A: West Asheville
5
17.1 mi into trip | ~27m in

Take the exit toward Chunns Cove Road, Tunnel Road

Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one

Toward Chunns Cove Road, Tunnel Road
5
17.9 mi into trip | ~29m in | Old Chunns Cove Road

Keep slight left at fork onto Old Chunns Cove Road

Highway fork - watch signs carefully

5
18.1 mi into trip | ~30m in

Turn right

Navigation decision point

Main Roads

Road Distance Duration
I 40 10.3 mi 12m
Billy Graham Freeway 2.8 mi 3m
North Fork Right Fork Road 1.4 mi 5m
North Fork Road 1.4 mi 2m
Montreat Road 0.6 mi 1m
Broadway Street 0.3 mi <1m
Chunns Cove Road 0.2 mi <1m
Old Chunns Cove Road 0.2 mi <1m
Longest stretch: I 40 — 10.3 mi, about 12m

Turn-by-Turn Driving Directions

Step-by-step road directions between Walkertown, NC and Highland Gate, NC.

1

Start on Penland Cove Road

103 ft · 7 sec · Penland Cove Road
2

Turn right onto North Fork Right Fork Road

0.5 mi · 1 min · North Fork Right Fork Road
3

Continue on North Fork Right Fork Road

0.9 mi · 3 min · North Fork Right Fork Road
4

Turn left onto North Fork Road

1.4 mi · 2 min · North Fork Road
5

Turn straight onto NC 9

0.6 mi · 1 min · Montreat Road
6

Continue on NC 9

0.3 mi · 52 sec · Broadway Street
7

Take the ramp

0.3 mi · 32 sec
8

Merge onto I 40

10 mi · 12 min · I 40
9

Keep slight right at fork onto I 240

2.8 mi · 3 min · Billy Graham Freeway
Toward I 240, US 74A: West Asheville
10

Take the exit

0.6 mi · 58 sec
Toward Chunns Cove Road, Tunnel Road
11

Turn right onto Chunns Cove Road

0.2 mi · 44 sec · Chunns Cove Road
12

Turn left onto Old Chunns Cove Road

201 ft · 8 sec · Old Chunns Cove Road
13

Keep slight left at fork onto Old Chunns Cove Road

0.1 mi · 39 sec · Old Chunns Cove Road
14

Turn right

120 ft · 8 sec
15

Arrive at destination

Fuel & Cost

Regular Gas

$2.83 one way

$5.66 round trip

$3.97/gal 25.4 MPG avg 6 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.34 $3.09 $6.19
premium $4.70 $3.35 $6.70
diesel $5.61 $4.00 $7.99

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$3

Estimated CO2 emission: 6.3 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $2 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 5.4 0 $1.90 $0.87
Efficient EV 4.5 0 $1.58 $0.72
EV Truck/SUV 7.2 0 $2.53 $1.16

Gas CO2

6 kg

EV CO2

2 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Walkertown, NC

Afternoon in Walkertown on Friday

Local time

1:54 PM

EDT

Current temp

71°F

Unavailable

Live forecast

Destination

Highland Gate, NC

Afternoon in Highland Gate on Friday

Local time

1:54 PM

EDT

Current temp

50°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

21 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

30m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Walkertown, NC to Highland Gate, NC covers 18.1 miles and takes about 30m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are I 40, Billy Graham Freeway, North Fork Right Fork Road. Most of the drive stays on highways, so watch for ramps and exits.

This is a comfortable same-day trip.

The midpoint is about 9.1 miles from Walkertown, NC. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $2.83 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

This drive requires moderate attention. Across 18.1 miles you will encounter 9 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

The main spots that need attention: near the start (North Fork Right Fork Road): Navigation decision point; at 14.3 miles (I 240 / Billy Graham Freeway): Highway fork - watch signs carefully. Multiple destination signs - pick the right one; at 17.1 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one.

The route from Walkertown, NC to Highland Gate, NC does not surface many named destination signs beyond the main corridor.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

More trips to Highland Gate, NC

Explore more options from Walkertown, NC or browse trips ending in Highland Gate, NC.

Looking for more statewide routes? Browse NC road trips.