Trip from Worthing, SD to Mitchell, SD

Drive Time

1h 30m

Distance

87.9 mi

141 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$13

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 21 min
4 AM
1h 23m ★
6 AM
1h 30m
8 AM
1h 44m
10 AM
1h 35m
12 PM
1h 34m
3 PM
1h 36m
5 PM
1h 44m
8 PM
1h 26m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Worthing, SD, SD

Worthing, SD

Lisa from Pexels

Downtown Mitchell, SD, SD

Mitchell, SD

Luis Quintero

Trip Overview

Traveling from Worthing to Mitchell covers 87.9 miles across the South Dakota Great Plains. You can comfortably complete this journey in about 1 hour and 30 minutes, making it an ideal day trip that requires no overnight stay. With a fuel budget of approximately $13, it is a cost-effective excursion for those looking to traverse this part of the state. Because both locations sit within the same region, you will experience consistent terrain throughout the trip. Whether you are heading out for business or leisure, the straightforward nature of this drive allows for a simple, stress-free travel experience.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

44 miles from Worthing, SD

A natural place for your longest stop of the day , about 46m into the drive .

Drive Character

This trip is heavily focused on highway driving, with 95% of your time spent on major routes like I-29, I-90, and 280th Street. You will settle into a steady rhythm quickly, highlighted by a significant 64.1-mile stretch along I-90. Expect a fast-paced environment where the road remains predictable and efficient. The transition between interstate segments and local roads is minimal, keeping your momentum high from start to finish. Behind the wheel, you should anticipate a straightforward, interstate-heavy experience that prioritizes speed and direct navigation over winding backroads.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 15 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 90 is the longest continuous segment at about 64.1 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 90 and I 29. You will hit about 9 points where you need to pay attention to lane position or signs. The trickiest moment comes around 0.1 miles in near CR 124 / West 1st Street.

Route Complexity 5/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

This drive requires moderate attention. Across 87.9 miles you will encounter 9 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: at 0.1 miles (CR 124 / West 1st Street): Navigation decision point; at 2 miles (I 29): Merge point - match speed before joining. Lane positioning matters here; at 21.5 miles: Exit ramp - move to the correct lane early.

Critical Maneuvers

5 of 9 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
0.1 mi into trip | ~0m in | CR 124 / West 1st Street

Turn left onto CR 124 / West 1st Street

Navigation decision point

5
2 mi into trip | ~3m in | I 29

Merge onto I 29

Merge point - match speed before joining. Lane positioning matters here

Use the none lane.
4
21.5 mi into trip | ~24m in

Take the exit toward I 90 West: Rapid City

Exit ramp - move to the correct lane early

Toward I 90 West: Rapid City
5
21.8 mi into trip | ~25m in | I 90

Merge onto I 90

Merge point - match speed before joining. Lane positioning matters here

Use the none lane.
5
86.1 mi into trip | ~1h 26m in

Keep slight right at fork

Highway fork - watch signs carefully

Main Roads

Road Distance Duration
I 90 64.1 mi 1h
I 29 19.5 mi 20m
280th Street 0.9 mi 1m
South Burr Street 0.7 mi 1m
West 1st Street 0.7 mi 1m
East Havens Avenue 0.5 mi 1m
South Sanborn Boulevard 0.5 mi 1m
I 90 Business 0.3 mi <1m
Longest stretch: I 90 — 64.1 mi, about 1h

Turn-by-Turn Driving Directions

Step-by-step road directions between Worthing, SD and Mitchell, SD.

1

Start on South Main Street

419 ft · 23 sec · South Main Street
2

Turn left onto CR 124

0.7 mi · 1 min · West 1st Street
3

Continue on CR 124

0.9 mi · 1 min · 280th Street
4

Take the ramp

0.3 mi · 35 sec
5

Merge onto I 29

20 mi · 20 min · I 29
Use the none lane.
6

Take the exit

0.2 mi · 29 sec
Toward I 90 West: Rapid City
7

Merge onto I 90

64 mi · 1 hr · I 90
Use the none lane.
8

Take the exit onto I 90 Business

0.3 mi · 34 sec · I 90 Business
Toward Mitchell
9

Keep slight right at fork

184 ft · 4 sec
10

Turn straight onto I 90 Business

0.7 mi · 1 min · South Burr Street
11

Turn left onto I 90 Business

0.5 mi · 1 min · East Havens Avenue
12

Turn slight right

260 ft · 9 sec
13

Turn straight onto South Sanborn Boulevard

0.5 mi · 1 min · South Sanborn Boulevard
14

Turn left onto West 1st Avenue

34 ft · 1 sec · West 1st Avenue
15

Arrive at destination

West 1st Avenue

Trip Plan

Since this is a relatively short drive, you have plenty of flexibility in your departure schedule to avoid peak traffic hours. You won't need to plan for any formal stops, as the 1.5-hour duration is easily manageable for most drivers without a break. Given the high percentage of highway travel, ensure your vehicle is prepared for consistent speeds before you merge onto I-90. Keep your $13 fuel budget in mind when planning your fill-ups, as you will cover the majority of the distance in one uninterrupted push. Staying alert during that long 64.1-mile interstate stretch is the best way to ensure a smooth arrival in Mitchell.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 44 miles from Worthing, SD, or about 46m into the drive.
The longest continuous stretch on this route runs about 64.1 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 20m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 44 miles or 46m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 15m

Traffic, exits, and arrival timing usually matter more near Mitchell, SD than in the middle of the route.

Before You Leave

+

Open the route before leaving Worthing, SD so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Worthing, SD

This is one driving day of about 87.9 miles and 1h 30m.

Your first comfortable stop window is around 80 miles from Worthing, SD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 90 for about 64.1 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 44 mi from Worthing, SD · 46m into the drive

Downtown Sioux Falls, SD, SD

Mid-route town

Meal stop

Sioux Falls, SD

44 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Madison, SD

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Tea, SD

Meal break

The midpoint is around 44 miles from Worthing, SD, which is a good place for a longer meal and fuel stop.

Before the longest stretch

Fuel check

Top up before I 90 if your tank is already low. That segment runs about 64.1 miles.

Arriving in Mitchell, SD

The final approach into Mitchell, SD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Mitchell, SD.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$13.35 one way

$26.70 round trip

$3.86/gal 25.4 MPG avg 31 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.25 $14.72 $29.44
premium $4.80 $16.59 $33.19
diesel $5.64 $19.53 $39.06

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$13

Meals

$25–$50

Total

$38–$63

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 30.8 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $9 in charging · 0 stops · 68% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 26.4 0 $9.23 $4.22
Efficient EV 22 0 $7.69 $3.52
EV Truck/SUV 35.2 0 $12.31 $5.63

Gas CO2

31 kg

EV CO2

10 kg (68% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Worthing, SD

Evening in Worthing on Sunday

Local time

6:04 PM

CDT

Current temp

40°F

Unavailable

Live forecast

Destination

Mitchell, SD

Evening in Mitchell on Sunday

Local time

6:04 PM

CDT

Current temp

40°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

Very similar conditions

Both ends of the route are sitting at about the same temperature right now.

Road read

1h 30m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Worthing, SD to Mitchell, SD covers 87.9 miles and takes about 1h 30m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 90, I 29, 280th Street. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 44 miles from Worthing, SD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $13.35 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 87.9 miles you will encounter 9 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: at 0.1 miles (CR 124 / West 1st Street): Navigation decision point; at 2 miles (I 29): Merge point - match speed before joining. Lane positioning matters here; at 21.5 miles: Exit ramp - move to the correct lane early.
The route from Worthing, SD to Mitchell, SD does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Mitchell, SD to Worthing, SD

Plan the drive back the other way.

87.6 mi 1h 30m

Explore more options from Worthing, SD or browse trips ending in Mitchell, SD.

Looking for more statewide routes? Browse SD road trips.

Explore maps for Worthing, SD or Mitchell, SD on MapSof.net.