The drive from Yakima, WA to Belfair, WA covers 188.7 miles and takes about 3h 49m behind the wheel.
This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on US 97, I 82, State Route 18 for much of the mileage,
and the overall profile is highway-focused drive.
The longest uninterrupted segment is about 85.7 miles on US 97.
At current regular gas prices, budget about $39.49 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
1 planned break
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
94.3 miles from Yakima, WA
A natural place for your longest stop of the day
, about 1h 46m into the drive
.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 3h 49m. Total distance: 188.7 miles.
Family Friendly
Moderate complexity with 1 natural rest stops along the way.
Solo Traveler
3h 49m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (92%). Some complex stretches to watch for.
Drive Character
This is a 3h 49m highway drive covering 188.7 miles, with most of the trip on US 97 and I 82. The longest continuous stretch is about 85.7 miles on US 97.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 32 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
US 97 is the longest continuous segment at about 85.7 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on US 97 and I 82. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 32.3 miles in near US 97.
Driving Effort10/10
High effort - long or complex enough to need steady focus all day
Balances navigation complexity with total wheel time.
This is a demanding drive. With 23 significant decision points across 188.7 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 32.3 miles (US 97): Highway fork - watch signs carefully. Lane positioning matters here; at 118 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 118.3 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.
Critical Maneuvers
5 of 23 key points
These are the spots where you need to pay the most attention. Preview them before you drive.
7
32.3 mi into trip|~37m in|US 97
Keep slight left at fork onto US 97 toward I 90 West
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight / slight right lanes.
Toward I 90 West
7
118 mi into trip|~2h 12m in
Take the exit toward WA 18 West: Auburn
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the slight right lane.
Exit 25
Toward WA 18 West: Auburn
9
118.3 mi into trip|~2h 13m in
Keep slight left at fork toward SR 18 west, Snoqualmie Parkway: Auburn, Tacoma
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the straight / left / right lanes.
Toward SR 18 west, Snoqualmie Parkway: Auburn,...
8
146 mi into trip|~2h 49m in
Keep slight left at fork toward I 5 South, WA 161: Enchanted Parkway South, Tacoma
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the straight lane.
Toward I 5 South, WA 161: Enchanted Parkway Sou...
8
155.4 mi into trip|~3h 1m in
Take the exit toward WA 16 West: Gig Harbor, Bremerton
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the straight / slight right lanes.
Exit 132B
Toward WA 16 West: Gig Harbor, Bremerton
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Yakima, WA and Belfair, WA, road signs point toward Snoqualmie Parkway: Auburn, Tacoma and Bremerton.
Snoqualmie Parkway: Auburn
118.3 mi in|~2h 13m
Tacoma
118.3 mi in|~2h 13m
Bremerton
155.4 mi in|~3h 1m
Main Roads
Road
Distance
Duration
US 97
85.7 mi
1h 35m
I 82
30.3 mi
32m
State Route 18
26.7 mi
34m
WA 16
19.4 mi
24m
I 5
8.5 mi
10m
Southwest Lake Flora Road
6.5 mi
9m
Northeast State Route 3
1.9 mi
3m
South 1st Street
1.6 mi
3m
Longest stretch:
US 97
— 85.7 mi, about 1h 35m
Turn-by-Turn Driving Directions
Step-by-step road directions between Yakima, WA and Belfair, WA.
1
Start on South 1st Street
1.6 mi·3 min·South 1st Street
2
Continue on Selah Road
0.1 mi·12 sec·Selah Road
3
Take the ramp
111 ft·2 sec
4
Keep slight left at fork
0.2 mi·31 sec
5
Merge onto I 82; US 97
30 mi·32 min·I 82; US 97
6
Keep slight left at fork onto US 97
86 mi·1 hr 35 min·US 97
Toward I 90 WestUse the straight / slight right lanes.
7
Take the exit
0.2 mi·30 sec
Exit 25Toward WA 18 West: AuburnUse the slight right lane.
8
Keep slight left at fork
448 ft·13 sec
Toward SR 18 west, Snoqualmie Parkway: Auburn, TacomaUse the straight / left / right lanes.
9
Merge onto WA 18
0.3 mi·25 sec·Snoqualmie Parkway
10
Continue on WA 18
27 mi·34 min·State Route 18
Use the straight / slight right lanes.
11
Take the exit
0.6 mi·1 min
Toward I 5: Seattle, TacomaUse the straight / slight right lanes.
12
Keep slight left at fork
0.6 mi·1 min
Toward I 5 South, WA 161: Enchanted Parkway South, TacomaUse the straight lane.
13
Keep slight left at fork
0.2 mi·31 sec
Toward I 5 South: Tacoma
14
Merge onto I 5
7.2 mi·9 min·I 5
Use the straight / slight right lanes.
15
Keep slight right at fork onto I 5
1.3 mi·1 min·I 5
16
Take the exit
0.6 mi·1 min
Exit 132BToward WA 16 West: Gig Harbor, BremertonUse the straight / slight right lanes.
17
Keep slight left at fork
0.5 mi·45 sec
Toward WA 16 West: Union AvenueUse the straight / slight right lanes.
18
Merge onto WA 16
19 mi·24 min·WA 16
Use the straight / slight right lanes.
19
Take the exit
0.3 mi·49 sec
Toward Mullenix RoadUse the straight / slight right lanes.
20
Turn left onto Southeast Mullenix Road
0.4 mi·45 sec·Southeast Mullenix Road
Use the straight / left lanes.
21
At end of road, turn right onto Bethel Burley Road Southeast
1.0 mi·1 min·Bethel Burley Road Southeast
22
Turn left onto Southeast Lider Road
1.0 mi·1 min·Southeast Lider Road
23
Continue on Southwest Lider Road
0.8 mi·1 min·Southwest Lider Road
24
At end of road, turn left onto Glenwood Road Southwest
0.4 mi·40 sec·Glenwood Road Southwest
Use the left lane.
25
Turn straight onto Southwest Lake Flora Road
2.9 mi·4 min·Southwest Lake Flora Road
26
Enter roundabout onto Southwest Lake Flora Road
25 ft·0 sec·Southwest Lake Flora Road
27
Continue on Southwest Lake Flora Road
3.6 mi·5 min·Southwest Lake Flora Road
28
At end of road, turn left onto WA 3
0.6 mi·52 sec·State Highway 3 Southwest
Use the left lane.
29
Continue on WA 3
0.2 mi·20 sec·Northeast State Route 3
30
Enter roundabout onto WA 3
123 ft·1 sec·Northeast State Route 3
31
Continue on WA 3
1.6 mi·2 min·Northeast State Route 3
32
Arrive at destination
WA 3
Trip Plan
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 94.3 miles from Yakima, WA, or about 1h 46m into the drive.
The longest continuous stretch on this route runs about 85.7 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 42 miles or 47m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 94.3 miles or 1h 46m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 3h 1m
Traffic, exits, and arrival timing usually matter more near Belfair, WA than in the middle of the route.
Before You Leave
+
Open the route before leaving Yakima, WA so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Yakima, WA
This is one driving day of about 188.7 miles and 3h 49m.
Your first comfortable stop window is around 42 miles from Yakima, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on US 97 for about 85.7 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 94.3 mi from Yakima, WA
· 1h 46m into the drive
The midpoint is around 94.3 miles from Yakima, WA, which is a good place for a longer meal and fuel stop.
Before the longest stretch
Fuel check
Top up before US 97 if your tank is already low. That segment runs about 85.7 miles.
Arriving in Belfair, WA
The final approach into Belfair, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Belfair, WA.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
National Parks Near This Route
Worth a detour if your schedule allows.
Klondike Gold Rush - Seattle Unit National Historical Park
National Historical Park
Seattle flourished during and after the Klondike Gold Rush. Merchants supplied people from around the world passing through this port city on their way to a remarkable adventure in the Yukon Territory...
17 mi from route
~42 min detour
Free
near mile 175.7
Park data from the National Park Service API. Alerts update every 2 hours.
Fuel & Cost
Regular Gas
$39.49 one way
$78.99 round trip
$5.32/gal25.4 MPG avg66 kg CO2
Fuel Type
$/gal
One Way
Round Trip
midgrade
$5.58
$41.42
$82.83
premium
$5.77
$42.85
$85.70
diesel
$5.61
$41.66
$83.33
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$39
Meals
$25–$50
Total
$64–$89
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 66 kg one way.
Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $20 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
56.6
0
$19.81
$9.06
Efficient EV
47.2
0
$16.51
$7.55
EV Truck/SUV
75.5
0
$26.42
$12.08
Gas CO2
66 kg
EV CO2
22 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 15, 2026
Origin
Yakima, WA
Late night
in Yakima on Friday
Local time
2:25 AM
PDT
Current temp
46°F
Unavailable
Live forecast
Destination
Belfair, WA
Late night
in Belfair on Friday
Local time
2:25 AM
PDT
Current temp
41°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
5 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
3h 49m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Yakima, WA to Belfair, WA covers 188.7 miles and takes about 3h 49m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are US 97, I 82, State Route 18. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 94.3 miles from Yakima, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $39.49 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a demanding drive. With 23 significant decision points across 188.7 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 32.3 miles (US 97): Highway fork - watch signs carefully. Lane positioning matters here; at 118 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 118.3 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.
Between Yakima, WA and Belfair, WA, road signs point toward Snoqualmie Parkway: Auburn, Tacoma and Bremerton.
Yes. Nearby national parks include Klondike Gold Rush - Seattle Unit National Historical Park.
How this page is built
Compiled and maintained by the Trip.ovh planning team at COD Solutions Oy (Helsinki). Each route is built from authoritative open government and mapping datasets rather than crowdsourced reviews. Distances and geometry come from
OSRM
over
OpenStreetMap.
Fuel cost uses
EIA
weekly regional averages.
National park proximity is from the
NPS API.
Pages are published only after passing our data-quality checks; our
methodology page
documents refresh cadence, editorial standards, and known limitations.
