Skip to main content

Trip from Allen Park, MI to Sterling Heights, MI

Data updated 0 seconds ago

Drive Time

42m

Distance

32.7 mi

53 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$5

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 10 min
4 AM
0h 39m ★
6 AM
0h 42m
8 AM
0h 49m
10 AM
0h 45m
12 PM
0h 44m
3 PM
0h 45m
5 PM
0h 49m
8 PM
0h 40m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

city in Wayne County, Michigan, United States

Allen Park, MI

Wikimedia Commons

Downtown Sterling Heights, MI, MI

Sterling Heights, MI

fish socks

Trip Overview

The drive from Allen Park, MI to Sterling Heights, MI covers 32.7 miles and takes about 42m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Garfield Avenue, Roosevelt Avenue, Southfield Road for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $5.11 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

16.3 miles from Allen Park, MI

A natural place for your longest stop of the day , about 21m into the drive .

Loading map...

Drive Character

Expect a 42m drive with frequent turns across 32.7 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 22 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Garfield Avenue is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive.

Route Complexity 1/10

Very easy - short and simple to drive

The drive from Allen Park, MI to Sterling Heights, MI is easy. At 42m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Allen Park, MI to Sterling Heights, MI is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
Garfield Avenue Unavailable Refreshing
Roosevelt Avenue Unavailable Refreshing
Southfield Road Unavailable Refreshing
I 94 Unavailable Refreshing
I 94 East Unavailable Refreshing
Detroit Industrial Expressway Unavailable Refreshing
Edsel Ford Freeway Unavailable Refreshing
I 75 Unavailable Refreshing

Per-road distance and duration are being refreshed from OSRM for this route.

Longest stretch: Garfield Avenue — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Allen Park, MI and Sterling Heights, MI.

1

Start on Allen Road

151 ft · 4 sec · Allen Road
2

Turn right onto Garfield Avenue

0.1 mi · 26 sec · Garfield Avenue
3

Turn right onto Roosevelt Avenue

0.2 mi · 33 sec · Roosevelt Avenue
4

Turn right onto Southfield Road

230 ft · 5 sec · Southfield Road
5

Take the exit slight left

0.1 mi · 22 sec
6

Merge slight right onto Southfield Road

0.1 mi · 16 sec · Southfield Road
7

Keep slight right to continue on Southfield Road

0.6 mi · 1 min · Southfield Road
8

Take the exit slight right toward I 94: Detroit, Chicago

289 ft · 9 sec · I 94: Detroit, Chicago
9

Keep slight right to continue on I 94 East: Detroit

0.6 mi · 1 min · I 94 East: Detroit
10

Merge slight left onto Detroit Industrial Expressway

5.1 mi · 5 min · Detroit Industrial Expressway
11

Continue on Edsel Ford Freeway

5.6 mi · 7 min · Edsel Ford Freeway
12

Take the exit slight right toward I 75: Flint, Toledo

302 ft · 6 sec · I 75: Flint, Toledo
13

Keep slight left to continue on I 75 North: Flint

0.5 mi · 1 min · I 75 North: Flint
14

Merge slight left onto North Walter P. Chrysler Freeway

7.8 mi · 8 min · North Walter P. Chrysler Freeway
15

Take the exit slight right toward I 696: Lansing, Port Huron

0.2 mi · 25 sec · I 696: Lansing, Port Huron
16

Keep slight right to continue on I-75 North to I-696 East

0.4 mi · 52 sec · I-75 North to I-696 East
17

Continue on Walter P Reuther Freeway

3.1 mi · 3 min · Walter P Reuther Freeway
18

Take the exit slight right toward Mound Road

0.3 mi · 38 sec · Mound Road
19

Keep slight left to continue on I-696 East to Northbound Mound Road

0.7 mi · 1 min · I-696 East to Northbound Mound Road
20

Turn straight onto Mound Road

5.9 mi · 9 min · Mound Road
21

Turn right onto 17 Mile Road

1.0 mi · 1 min · 17 Mile Road
22

Arrive at your destination

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 16.3 miles from Allen Park, MI, or about 21m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 32.7 miles or 42m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 16.3 miles or 21m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 35m

Traffic, exits, and arrival timing usually matter more near Sterling Heights, MI than in the middle of the route.

Before You Leave

+

Open the route before leaving Allen Park, MI so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Allen Park, MI

This is one driving day of about 32.7 miles and 42m.

Your first comfortable stop window is around 80 miles from Allen Park, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 16.3 mi from Allen Park, MI · 21m into the drive

Downtown Ann Arbor, MI, MI

Mid-route town

Meal stop

Ann Arbor, MI

16 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Ann Arbor, MI

Fuel and coffee

A short stop after about 32.7 miles helps settle the day before fatigue starts building.

Ann Arbor, MI

Meal break

The midpoint is around 16.3 miles from Allen Park, MI, which is a good place for a longer meal and fuel stop.

Arriving in Sterling Heights, MI

The final approach into Sterling Heights, MI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Sterling Heights, MI.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$5.11 one way

$10.22 round trip

$3.97/gal 25.4 MPG avg 11 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $5.61 $11.23
premium $4.89 $6.29 $12.59
diesel $5.61 $7.22 $14.44

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$5

Meals

$25–$50

Total

$30–$55

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 11.4 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 64% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 9.8 0 $3.43 $1.57
Efficient EV 8.2 0 $2.86 $1.31
EV Truck/SUV 13.1 0 $4.58 $2.09

Gas CO2

11 kg

EV CO2

4 kg (64% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 5 days ago

Origin

Allen Park, MI

Late night in Allen Park on Wednesday

Local time

5:27 AM

EDT

Current temp

71°F

Unavailable

Live forecast

Destination

Sterling Heights, MI

Late night in Sterling Heights on Wednesday

Local time

5:27 AM

EDT

Current temp

68°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

3 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

42m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Allen Park, MI to Sterling Heights, MI covers 32.7 miles and takes about 42m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Garfield Avenue, Roosevelt Avenue, Southfield Road. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 16.3 miles from Allen Park, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $5.11 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Allen Park, MI to Sterling Heights, MI is easy. At 42m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Allen Park, MI to Sterling Heights, MI is straightforward, with well-signed roads and simple exits.
The route from Allen Park, MI to Sterling Heights, MI does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Allen Park, MI or browse trips ending in Sterling Heights, MI.

Looking for more statewide routes? Browse MI road trips.

Explore maps for Allen Park, MI or Sterling Heights, MI on MapSof.net.