Skip to main content

Trip from Baltimore, MD to Clinton, MD

Last recalculated Apr 16, 2026

Drive Time

1h 6m

Distance

44.8 mi

72 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$7

one way

EV Charging

Unknown

Best Time to Leave

Save up to 16 min
4 AM
1h 1m ★
6 AM
1h 7m
8 AM
1h 17m
10 AM
1h 11m
12 PM
1h 9m
3 PM
1h 11m
5 PM
1h 17m
8 PM
1h 4m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

census-designated place in Prince George's County, Maryland, United States

Clinton, MD

Wikimedia Commons

Trip Overview

The drive from Baltimore, MD to Clinton, MD covers 44.8 miles and takes about 1h 6m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Baltimore-Washington Parkway, Capital Beltway, MD 337 for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 24.7 miles on Baltimore-Washington Parkway. At current regular gas prices, budget about $7.43 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 1h 6m. Total distance: 44.8 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

1h 6m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (60%). Some complex stretches to watch for.

Drive Character

The drive from Baltimore, MD to Clinton, MD covers 44.8 miles and takes about 1h 6m, using a mix of highways and local roads.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 17 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Baltimore-Washington Parkway is the longest continuous segment at about 24.7 miles.

How Hard Is This Drive?

This route mixes highway mileage with some local-road sections near the start or finish. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.6 miles in near MD 295 / North Greene Street.

Driving Effort 8/10

Demanding - plan breaks and stay ahead of the key maneuvers

Balances navigation complexity with total wheel time.

This drive requires moderate attention. Across 44.8 miles you will encounter 12 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: at 0.6 miles (MD 295 / North Greene Street): Lane positioning matters here; at 26.7 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 39.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 12 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
0.6 mi into trip | ~1m in | MD 295 / North Greene Street

Turn left onto MD 295 / North Greene Street

Lane positioning matters here

Use the left / straight lanes.
7
26.7 mi into trip | ~38m in

Take the exit toward I 95 South, I 495 South: Richmond, Andrews Air Force Base

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the right lane. Toward I 95 South, I 495 South: Richmond, Andre...
8
39.4 mi into trip | ~56m in

Take the exit toward MD 337: Andrews Air Force Base Main Gate, Morningside

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 9 Toward MD 337: Andrews Air Force Base Main Gate...
6
39.6 mi into trip | ~57m in | MD 337 / Forestville Road

Turn right onto MD 337 / Forestville Road

Lane positioning matters here

Use the straight / left / right lanes.
7
43.1 mi into trip | ~1h 3m in

Take the exit toward Old Branch Avenue, Kirby Road

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Toward Old Branch Avenue, Kirby Road

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

Between Baltimore, MD and Clinton, MD, road signs point toward Andrews Air Force Base and Morningside.

Andrews Air Force Base

26.7 mi in | ~38m

Morningside

39.4 mi in | ~56m

Main Roads

Road Distance Duration
Baltimore-Washington Parkway 24.7 mi 33m
Capital Beltway 12.4 mi 16m
MD 337 2.2 mi 4m
Old Branch Avenue 1.5 mi 2m
Russell Street 1 mi 2m
Branch Avenue 0.7 mi <1m
West Fayette Street 0.4 mi 1m
North Greene Street 0.4 mi <1m
Longest stretch: Baltimore-Washington Parkway — 24.7 mi, about 33m

Turn-by-Turn Driving Directions

Step-by-step road directions between Baltimore, MD and Clinton, MD.

1

Start on East Fayette Street

0.2 mi · 38 sec · East Fayette Street
Use the straight / left lanes.
2

Continue on West Fayette Street

0.4 mi · 1 min · West Fayette Street
3

Turn left onto MD 295

0.4 mi · 47 sec · North Greene Street
Use the left / straight lanes.
4

Continue on MD 295

1.0 mi · 2 min · Russell Street
Use the straight / right lanes.
5

Turn straight onto MD 295

25 mi · 33 min · Baltimore-Washington Parkway
Use the straight / slight right lanes.
6

Take the exit

0.3 mi · 1 min
Toward I 95 South, I 495 South: Richmond, Andrews Air Force Base Use the right lane.
7

Merge onto I 95; I 495

12 mi · 16 min · Capital Beltway
Use the straight / slight right lanes.
8

Take the exit

0.2 mi · 34 sec
Exit 9 Toward MD 337: Andrews Air Force Base Main Gate, Morningside Use the straight / slight right lanes.
9

Turn right onto MD 337

426 ft · 12 sec · Forestville Road
Use the straight / left / right lanes.
10

Turn slight right onto MD 337

2.2 mi · 4 min · MD 337
Toward MD 337 South
11

Turn left

0.5 mi · 39 sec
Toward MD 5 South: Waldorf
12

Merge onto MD 5

0.7 mi · 45 sec · Branch Avenue
13

Take the exit

0.2 mi · 25 sec
Toward Old Branch Avenue, Kirby Road Use the straight / slight right lanes.
14

Turn straight onto Old Branch Avenue

1.5 mi · 2 min · Old Branch Avenue
15

Turn right onto MD 223

68 ft · 7 sec · Piscataway Road
16

Turn left

43 ft · 3 sec
17

Arrive at destination

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 22.4 mi from Baltimore, MD · 32m into the drive

city in Prince George’s County, Maryland, United States

Mid-route town

Meal stop

New Carrollton, MD

22 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Catonsville, MD

Fuel and coffee

A short stop after about 10 miles helps settle the day before fatigue starts building.

New Carrollton, MD

Meal break

The midpoint is around 22.4 miles from Baltimore, MD, which is a good place for a longer meal and fuel stop.

Arriving in Clinton, MD

The final approach into Clinton, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$7.43 one way

$14.85 round trip

$4.21/gal 25.4 MPG avg 16 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $8.13 $16.27
premium $4.93 $8.69 $17.38
diesel $5.61 $9.89 $19.78

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$7

Estimated CO2 emission: 15.7 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $5 in charging · 0 stops · 69% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 13.4 0 $4.70 $2.15
Efficient EV 11.2 0 $3.92 $1.79
EV Truck/SUV 17.9 0 $6.27 $2.87

Gas CO2

16 kg

EV CO2

5 kg (69% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 16, 2026

Origin

Baltimore, MD

Evening in Baltimore on Thursday

Local time

5:00 PM

EDT

Current temp

91°F

Mostly Sunny

SW 8 to 12 mph 2% chance Live forecast

Destination

Clinton, MD

Evening in Clinton on Thursday

Local time

5:00 PM

EDT

Current temp

50°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

41 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 6m on the road

The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Baltimore, MD to Clinton, MD covers 44.8 miles and takes about 1h 6m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Baltimore-Washington Parkway, Capital Beltway, MD 337. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 22.4 miles from Baltimore, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $7.43 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 44.8 miles you will encounter 12 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: at 0.6 miles (MD 295 / North Greene Street): Lane positioning matters here; at 26.7 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 39.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
Between Baltimore, MD and Clinton, MD, road signs point toward Andrews Air Force Base and Morningside.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Baltimore, MD or browse trips ending in Clinton, MD.

Looking for more statewide routes? Browse MD road trips.

Explore maps for Baltimore, MD or Clinton, MD on MapSof.net.