Origin
Bellevue, MI
Evening in Bellevue on Sunday
Local time
8:04 PM
EDT
Current temp
50°F
Unavailable
Live forecast
Trip from Bellevue, MI to Eaton Rapids, MI
Drive Time
34m
Distance
24.8 mi
40 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$4
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
0h 31m
★
6 AM
0h 34m
8 AM
0h 40m
10 AM
0h 36m
12 PM
0h 36m
3 PM
0h 36m
5 PM
0h 40m
8 PM
0h 32m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Bellevue, MI
Israyosoy S.
Eaton Rapids, MI
Robert Schrader
Trip Overview
The drive from Bellevue, MI to Eaton Rapids, MI covers 24.8 miles and takes about 34m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on I 69, East Clinton Trail, Butterfield Highway for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 10.6 miles on I 69. At current regular gas prices, budget about $3.77 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
12.4 miles from Bellevue, MI
A natural place for your longest stop of the day , about 16m into the drive .
Drive Character
The drive from Bellevue, MI to Eaton Rapids, MI covers 24.8 miles and takes about 34m, using a mix of highways and local roads.
Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 10 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 69 is the longest continuous segment at about 10.6 miles.
Elevation Profile
Mostly flat terrain
948 ft
866 ft
Total Climb
185 ft
Total Descent
180 ft
Highest Point
948 ft
~20.6 mi in
Elevation Range
82 ft
How Hard Is This Drive?
This route mixes highway mileage with some local-road sections near the start or finish. Navigation is very simple — set it and forget it for most of the drive. The trickiest moment comes around 4 miles in.
Route Complexity
2/10
Very easy - short and simple to drive
The drive from Bellevue, MI to Eaton Rapids, MI is easy. At 34m with 43% highway, most drivers will find it relaxed and low-stress.
Where does it get tricky?
The main spots that need attention: at 4 miles: Navigation decision point; at 4.4 miles (I 69): Merge point - match speed before joining; at 15 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one.
Critical Maneuvers
5 of 5 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
5
4 mi into trip
|
~7m in
Take the ramp toward I 69
Navigation decision point
Toward I 69
3
4.4 mi into trip
|
~7m in
|
I 69
Merge onto I 69
Merge point - match speed before joining
6
15 mi into trip
|
~19m in
Take the exit toward M 50: Charlotte, Eaton Rapids
Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one
Exit 60
Toward M 50: Charlotte, Eaton Rapids
3
15.4 mi into trip
|
~20m in
|
M 50 / East Clinton Trail
Turn right onto M 50 / East Clinton Trail
Navigation decision point
4
24.7 mi into trip
|
~34m in
|
State Street
Turn left onto State Street
Navigation decision point
Towns Along This Route
On the drive from Bellevue, MI to Eaton Rapids, MI, road signs begin pointing toward M 50: Charlotte along the way.
M 50: Charlotte
15 mi in
|
~19m
Main Roads
| Road | Distance | Duration |
|---|---|---|
| I 69 | 10.6 mi | 11m |
| East Clinton Trail | 8.2 mi | 11m |
| Butterfield Highway | 3.6 mi | 6m |
| Dexter Road | 0.7 mi | 1m |
| South Main Street | 0.5 mi | <1m |
| North Main Street | 0.4 mi | 1m |
| State Street | <0.1 mi | <1m |
Longest stretch:
I 69
— 10.6 mi, about 11m
Turn-by-Turn Driving Directions
Step-by-step road directions between Bellevue, MI and Eaton Rapids, MI.
1
Start on M 78
0.5 mi
·
50 sec
·
South Main Street
2
Continue on Butterfield Highway
3.6 mi
·
6 min
·
Butterfield Highway
3
Take the ramp
0.4 mi
·
45 sec
Toward I 69
4
Merge onto I 69
11 mi
·
11 min
·
I 69
5
Take the exit
0.4 mi
·
56 sec
Exit 60
Toward M 50: Charlotte, Eaton Rapids
6
Turn right onto M 50
8.2 mi
·
11 min
·
East Clinton Trail
7
Continue on M 50
0.7 mi
·
1 min
·
Dexter Road
8
Continue on M 50; M 99
0.4 mi
·
1 min
·
North Main Street
9
Turn left onto State Street
44 ft
·
1 sec
·
State Street
10
Arrive at destination
State Street
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 12.4 miles from Bellevue, MI, or about 16m into the drive.
The longest continuous stretch on this route runs about 10.6 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 24.8 miles or 34m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 12.4 miles or 16m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 27m
Traffic, exits, and arrival timing usually matter more near Eaton Rapids, MI than in the middle of the route.
Before You Leave
+
Open the route before leaving Bellevue, MI so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Bellevue, MI
This is one driving day of about 24.8 miles and 34m.
Your first comfortable stop window is around 80 miles from Bellevue, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 69 for about 10.6 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 12.4 mi from Bellevue, MI · 16m into the drive
Mid-route town
Meal stop
12 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 24.8 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 12.4 miles from Bellevue, MI, which is a good place for a longer meal and fuel stop.
Arriving in Eaton Rapids, MI
The final approach into Eaton Rapids, MI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Eaton Rapids, MI.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$3.77 one way
$7.53 round trip
$3.86/gal
25.4 MPG avg
9 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.25 | $4.15 | $8.31 |
| premium | $4.80 | $4.68 | $9.36 |
| diesel | $5.64 | $5.51 | $11.02 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$4
Meals
$25–$50
Total
$29–$54
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 8.7 kg one way. Prices: EIA weekly data, 2026-04-06.
Driving Electric?
About $3 in charging · 0 stops · 67% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 7.4 | 0 | $2.60 | $1.19 |
| Efficient EV | 6.2 | 0 | $2.17 | $0.99 |
| EV Truck/SUV | 9.9 | 0 | $3.47 | $1.59 |
Gas CO2
9 kg
EV CO2
3 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Eaton Rapids, MI
Evening in Eaton Rapids on Sunday
Local time
8:04 PM
EDT
Current temp
46°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
4 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
34m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Bellevue, MI to Eaton Rapids, MI covers 24.8 miles and takes about 34m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 69, East Clinton Trail, Butterfield Highway. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 12.4 miles from Bellevue, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $3.77 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Bellevue, MI to Eaton Rapids, MI is easy. At 34m with 43% highway, most drivers will find it relaxed and low-stress.
The main spots that need attention: at 4 miles: Navigation decision point; at 4.4 miles (I 69): Merge point - match speed before joining; at 15 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one.
On the drive from Bellevue, MI to Eaton Rapids, MI, road signs begin pointing toward M 50: Charlotte along the way.
Mostly flat terrain. The route ranges from 866 ft to 948 ft elevation with about 185 ft of total climbing.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Eaton Rapids, MI
More from Bellevue, MI
More trips to Eaton Rapids, MI
Explore more options from Bellevue, MI or browse trips ending in Eaton Rapids, MI.
Looking for more statewide routes? Browse MI road trips.
Explore maps for Bellevue, MI or Eaton Rapids, MI on MapSof.net.