Trip from Eaton Rapids, MI to Bellevue, MI

Drive Time

34m

Distance

24.8 mi

40 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$4

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 9 min
4 AM
0h 31m ★
6 AM
0h 34m
8 AM
0h 40m
10 AM
0h 36m
12 PM
0h 36m
3 PM
0h 37m
5 PM
0h 40m
8 PM
0h 32m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Eaton Rapids, MI, MI

Eaton Rapids, MI

Robert Schrader

Downtown Bellevue, MI, MI

Bellevue, MI

Israyosoy S.

Trip Overview

The drive from Eaton Rapids, MI to Bellevue, MI covers 24.8 miles and takes about 34m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on I 69, East Clinton Trail, Butterfield Highway for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 10.6 miles on I 69. At current regular gas prices, budget about $3.77 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

12.4 miles from Eaton Rapids, MI

A natural place for your longest stop of the day , about 17m into the drive .

Drive Character

The drive from Eaton Rapids, MI to Bellevue, MI covers 24.8 miles and takes about 34m, using a mix of highways and local roads.

Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 11 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 69 is the longest continuous segment at about 10.6 miles.

Elevation Profile

Mostly flat terrain

947 ft 866 ft

Total Climb

184 ft

Total Descent

189 ft

Highest Point

947 ft

~4.1 mi in

Elevation Range

82 ft

How Hard Is This Drive?

This route mixes highway mileage with some local-road sections near the start or finish. Navigation is very simple — set it and forget it for most of the drive. The trickiest moment comes early in the drive near M 50; M 99 / South Main Street.

Route Complexity 2/10

Very easy - short and simple to drive

The drive from Eaton Rapids, MI to Bellevue, MI is easy. At 34m with 43% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

The main spots that need attention: near the start (M 50; M 99 / South Main Street): Navigation decision point; at 9.7 miles: Navigation decision point; at 10 miles (I 69): Merge point - match speed before joining.

Critical Maneuvers

5 of 5 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
0 mi into trip | ~0m in | M 50; M 99 / South Main Street

Turn right onto M 50; M 99 / South Main Street

Navigation decision point

4
9.7 mi into trip | ~14m in

Take the ramp

Navigation decision point

3
10 mi into trip | ~15m in | I 69

Merge onto I 69

Merge point - match speed before joining

4
20.7 mi into trip | ~26m in

Take the exit toward M 78: Bellevue

Exit ramp - move to the correct lane early

Toward M 78: Bellevue
4
21.1 mi into trip | ~27m in | Butterfield Highway

Turn right onto Butterfield Highway

Navigation decision point

Towns Along This Route

On the drive from Eaton Rapids, MI to Bellevue, MI, road signs begin pointing toward M 78: Bellevue along the way.

M 78: Bellevue

20.7 mi in | ~26m

Main Roads

Road Distance Duration
I 69 10.6 mi 11m
East Clinton Trail 8.3 mi 11m
Butterfield Highway 3.2 mi 5m
South Main Street 0.9 mi 1m
Dexter Road 0.7 mi 1m
East Shepherd Street 0.2 mi <1m
State Street <0.1 mi <1m
Longest stretch: I 69 — 10.6 mi, about 11m

Turn-by-Turn Driving Directions

Step-by-step road directions between Eaton Rapids, MI and Bellevue, MI.

1

Start on State Street

44 ft · 5 sec · State Street
2

Turn right onto M 50; M 99

0.4 mi · 1 min · South Main Street
3

Continue on M 50

0.7 mi · 1 min · Dexter Road
4

Continue on M 50

8.3 mi · 11 min · East Clinton Trail
5

Continue on M 50

0.2 mi · 22 sec · East Shepherd Street
6

Take the ramp

0.4 mi · 50 sec
7

Merge onto I 69

11 mi · 11 min · I 69
8

Take the exit

0.5 mi · 1 min
Toward M 78: Bellevue
9

Turn right onto Butterfield Highway

3.2 mi · 5 min · Butterfield Highway
10

Continue on M 78

0.5 mi · 50 sec · South Main Street
11

Arrive at destination

M 78

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 12.4 miles from Eaton Rapids, MI, or about 17m into the drive.
The longest continuous stretch on this route runs about 10.6 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 24.8 miles or 34m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 12.4 miles or 17m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 27m

Traffic, exits, and arrival timing usually matter more near Bellevue, MI than in the middle of the route.

Before You Leave

+

Open the route before leaving Eaton Rapids, MI so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Eaton Rapids, MI

This is one driving day of about 24.8 miles and 34m.

Your first comfortable stop window is around 80 miles from Eaton Rapids, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 69 for about 10.6 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 12.4 mi from Eaton Rapids, MI · 17m into the drive

Downtown Evanston, IL, IL

Mid-route town

Meal stop

Evanston, IL

12 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Chicago, IL

Fuel and coffee

A short stop after about 24.8 miles helps settle the day before fatigue starts building.

Chicago, IL

Meal break

The midpoint is around 12.4 miles from Eaton Rapids, MI, which is a good place for a longer meal and fuel stop.

Arriving in Bellevue, MI

The final approach into Bellevue, MI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Bellevue, MI.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$3.77 one way

$7.53 round trip

$3.86/gal 25.4 MPG avg 9 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.25 $4.15 $8.31
premium $4.80 $4.68 $9.36
diesel $5.64 $5.51 $11.02

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$4

Meals

$25–$50

Total

$29–$54

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 8.7 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $3 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 7.4 0 $2.60 $1.19
Efficient EV 6.2 0 $2.17 $0.99
EV Truck/SUV 9.9 0 $3.47 $1.59

Gas CO2

9 kg

EV CO2

3 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Eaton Rapids, MI

Evening in Eaton Rapids on Sunday

Local time

8:04 PM

EDT

Current temp

46°F

Unavailable

Live forecast

Destination

Bellevue, MI

Evening in Bellevue on Sunday

Local time

8:04 PM

EDT

Current temp

50°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

4 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

34m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Eaton Rapids, MI to Bellevue, MI covers 24.8 miles and takes about 34m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 69, East Clinton Trail, Butterfield Highway. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 12.4 miles from Eaton Rapids, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $3.77 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Eaton Rapids, MI to Bellevue, MI is easy. At 34m with 43% highway, most drivers will find it relaxed and low-stress.
The main spots that need attention: near the start (M 50; M 99 / South Main Street): Navigation decision point; at 9.7 miles: Navigation decision point; at 10 miles (I 69): Merge point - match speed before joining.
On the drive from Eaton Rapids, MI to Bellevue, MI, road signs begin pointing toward M 78: Bellevue along the way.
Mostly flat terrain. The route ranges from 866 ft to 947 ft elevation with about 184 ft of total climbing.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Bellevue, MI to Eaton Rapids, MI

Plan the drive back the other way.

24.8 mi 34m

More trips to Bellevue, MI

Explore more options from Eaton Rapids, MI or browse trips ending in Bellevue, MI.

Looking for more statewide routes? Browse MI road trips.

Explore maps for Eaton Rapids, MI or Bellevue, MI on MapSof.net.