Origin
Bellevue, WA
Evening in Bellevue on Sunday
Local time
6:36 PM
PDT
Current temp
40°F
Unavailable
Live forecast
Trip from Bellevue, WA to Benton City, WA
Drive Time
3h 48m
Distance
202.4 mi
326 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$42
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
3h 36m
★
6 AM
3h 48m
8 AM
4h 14m
10 AM
3h 57m
12 PM
3h 55m
3 PM
3h 59m
5 PM
4h 13m
8 PM
3h 41m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Benton City, WA
JOHN CALLERY
Trip Overview
Spanning 202.4 miles, this direct route from Bellevue to Benton City typically takes about 3 hours and 48 minutes of driving time. Because the trip is straightforward and relies heavily on major thoroughfares, it is easily manageable as a single-day excursion. You should budget approximately $42 for fuel to cover the distance. Since the entire trip remains within Washington state, you will stay comfortably within the Pacific Coast region. Whether you are heading out for a quick getaway or a necessary commute, the efficiency of the highway connections makes this a practical choice for travelers who prefer to minimize time spent on local roads.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
1 planned break
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
101.2 miles from Bellevue, WA
A natural place for your longest stop of the day , about 1h 55m into the drive .
Drive Character
Expect a fast-paced, highway-focused experience, as 98% of your journey takes place on high-speed roads. You will rely on a combination of I-90, I-82, and US-97 to navigate toward your destination. A significant portion of your time behind the wheel will be spent on a 100.5-mile stretch along I-90, which serves as the longest uninterrupted segment of the trip. The character of the drive is defined by these consistent, high-capacity routes, offering a streamlined transition between your starting point and the final destination. Prepare for a steady, predictable rhythm that prioritizes speed and efficiency over winding local paths.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 90 is the longest continuous segment at about 100.5 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on I 90 and I 82. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.2 miles in near Northeast 2nd Street.
Route Complexity
8/10
Demanding - plan breaks and stay ahead of the key maneuvers
This is a demanding drive. With 15 significant decision points across 202.4 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 0.2 miles (Northeast 2nd Street): Lane positioning matters here; at 0.5 miles (Northeast 4th Street): Lane positioning matters here; at 2.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
Critical Maneuvers
5 of 15 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
7
0.2 mi into trip
|
~0m in
|
Northeast 2nd Street
Turn right onto Northeast 2nd Street
Lane positioning matters here
Use the none lane.
6
0.5 mi into trip
|
~1m in
|
Northeast 4th Street
Turn right onto Northeast 4th Street
Lane positioning matters here
Use the right lane.
8
2.6 mi into trip
|
~5m in
Take the exit toward I 90: Spokane, Seattle
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 11
Toward I 90: Spokane, Seattle
7
3.1 mi into trip
|
~6m in
Keep slight left at fork toward I 90 East: Spokane
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight left lane.
Toward I 90 East: Spokane
7
104.1 mi into trip
|
~1h 59m in
|
US 97
Take the exit onto US 97 toward I 82 East, US 97 South: Yakima
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the straight / slight right lanes.
Toward I 82 East, US 97 South: Yakima
Main Roads
| Road | Distance | Duration |
|---|---|---|
| I 90 | 100.5 mi | 1h 51m |
| I 82 | 58.8 mi | 1h 3m |
| US 97 | 37.8 mi | 42m |
| I 405 | 1.3 mi | 1m |
| Babs Avenue | 0.5 mi | 1m |
| 1st Street | 0.5 mi | 1m |
| 9th Street | 0.4 mi | <1m |
| Northeast 4th Street | 0.3 mi | <1m |
Longest stretch:
I 90
— 100.5 mi, about 1h 51m
Turn-by-Turn Driving Directions
Step-by-step road directions between Bellevue, WA and Benton City, WA.
1
Start on this road
45 ft
·
6 sec
·
this road
2
Turn right onto Main Street
150 ft
·
7 sec
·
Main Street
3
Turn right onto Bellevue Way Northeast
0.1 mi
·
22 sec
·
Bellevue Way Northeast
4
Turn right onto Northeast 2nd Street
0.2 mi
·
46 sec
·
Northeast 2nd Street
Use the none lane.
5
Turn left onto 108th Avenue Northeast
0.1 mi
·
17 sec
·
108th Avenue Northeast
6
Turn right onto Northeast 4th Street
0.3 mi
·
58 sec
·
Northeast 4th Street
Use the right lane.
7
Take the ramp
0.4 mi
·
53 sec
Toward I 405 South: Renton
Use the straight / right lanes.
8
Merge onto I 405
1.3 mi
·
1 min
·
I 405
Use the none / straight / slight right lanes.
9
Take the exit
0.5 mi
·
1 min
Exit 11
Toward I 90: Spokane, Seattle
Use the slight right lane.
10
Keep slight left at fork
0.5 mi
·
1 min
Toward I 90 East: Spokane
Use the slight left lane.
11
Merge onto I 90
101 mi
·
1 hr 51 min
·
I 90
Use the none lane.
12
Take the exit onto US 97
38 mi
·
42 min
·
US 97
Toward I 82 East, US 97 South: Yakima
Use the straight / slight right lanes.
13
Keep slight left at fork onto I 82; US 12
59 mi
·
1 hr 3 min
·
I 82; US 12
14
Take the exit
0.3 mi
·
27 sec
Toward SR 224 east, SR 225 north: West Richland, Benton City
15
Turn left onto WA 224
356 ft
·
8 sec
·
1st Street
16
Enter roundabout onto WA 225
140 ft
·
2 sec
·
1st Street
17
Continue on WA 225
0.4 mi
·
52 sec
·
1st Street
18
Continue on WA 225
0.5 mi
·
1 min
·
Babs Avenue
19
Turn slight right onto WA 225
0.4 mi
·
57 sec
·
9th Street
20
Arrive at destination
WA 225
Trip Plan
To make the most of your 3 hour and 48 minute journey, aim to depart early to avoid potential congestion on the interstate. While the drive is straightforward, planning for at least one stop is a smart way to break up the monotony of the long highway stretches. Keep a close eye on your fuel gauge before starting the 100.5-mile segment on I-90 to ensure you don't run low in a remote area. Because the route is compact enough for a single day, you have the flexibility to adjust your pace based on traffic conditions. Your best bet is to maintain a steady speed and utilize cruise control where appropriate to stay comfortable during the longer highway segments.
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 101.2 miles from Bellevue, WA, or about 1h 55m into the drive.
The longest continuous stretch on this route runs about 100.5 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 80 miles or 1h 32m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 101.2 miles or 1h 55m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 3h 7m
Traffic, exits, and arrival timing usually matter more near Benton City, WA than in the middle of the route.
Before You Leave
+
Open the route before leaving Bellevue, WA so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Bellevue, WA
This is one driving day of about 202.4 miles and 3h 48m.
Your first comfortable stop window is around 80 miles from Bellevue, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on I 90 for about 100.5 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 101.2 mi from Bellevue, WA · 1h 55m into the drive
Mid-route town
Meal stop
101 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 80 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 101.2 miles from Bellevue, WA, which is a good place for a longer meal and fuel stop.
Before the longest stretch
Fuel checkTop up before I 90 if your tank is already low. That segment runs about 100.5 miles.
Arriving in Benton City, WA
The final approach into Benton City, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Benton City, WA.
After long uninterrupted mileage, take five minutes before the last urban segment to reset and refocus on exits, merges, and city traffic.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$42.48 one way
$84.96 round trip
$5.33/gal
25.4 MPG avg
71 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $5.57 | $44.36 | $88.72 |
| premium | $5.77 | $45.99 | $91.97 |
| diesel | $5.64 | $44.97 | $89.93 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$42
Meals
$25–$50
Total
$67–$92
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 70.8 kg one way. Prices: EIA weekly data, 2026-04-06.
Driving Electric?
About $21 in charging · 0 stops · 66% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 60.7 | 0 | $21.25 | $9.72 |
| Efficient EV | 50.6 | 0 | $17.71 | $8.10 |
| EV Truck/SUV | 81 | 1 | $28.34 | $12.95 |
Gas CO2
71 kg
EV CO2
24 kg (66% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Benton City, WA
Evening in Benton City on Sunday
Local time
6:36 PM
PDT
Current temp
38°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
2 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
3h 48m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Bellevue, WA to Benton City, WA covers 202.4 miles and takes about 3h 48m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 90, I 82, US 97. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 101.2 miles from Bellevue, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $42.48 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a demanding drive. With 15 significant decision points across 202.4 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 0.2 miles (Northeast 2nd Street): Lane positioning matters here; at 0.5 miles (Northeast 4th Street): Lane positioning matters here; at 2.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
The route from Bellevue, WA to Benton City, WA does not surface many named destination signs beyond the main corridor.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Benton City, WA
More trips to Benton City, WA
Explore more options from Bellevue, WA or browse trips ending in Benton City, WA.
Looking for more statewide routes? Browse WA road trips.
Explore maps for Bellevue, WA or Benton City, WA on MapSof.net.