Trip from Everett, WA to Benton City, WA

Drive Time

4h 21m

Distance

229.3 mi

369 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$48

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 40 min
4 AM
4h 8m ★
6 AM
4h 21m
8 AM
4h 48m
10 AM
4h 31m
12 PM
4h 28m
3 PM
4h 32m
5 PM
4h 47m
8 PM
4h 13m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Benton City, WA, WA

Benton City, WA

JOHN CALLERY

Trip Overview

Spanning 229.3 miles across Washington State, this trip from Everett to Benton City is a straightforward drive that typically takes about 4 hours and 21 minutes. Because the total journey is well within the capacity of a single day, you can easily complete it in one sitting without needing an overnight stay. You should budget approximately $48 for fuel to cover the distance, making it a manageable excursion for a weekend or a quick getaway. Since the route relies heavily on major thoroughfares, it is a practical choice for those who prioritize efficiency over backroad exploration. Transitioning from the Pacific Coast area to your destination, you will find this route serves as a reliable connection across the state.

Trip Pace

Same-day drive is realistic

A same-day return is possible, but it will make for a full day on the road.

Break Rhythm

1 planned break

Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.

Midpoint

114.6 miles from Everett, WA

A natural place for your longest stop of the day , about 2h 13m into the drive .

Drive Character

Expect a highly efficient journey, as 98% of this route consists of highway driving. You will primarily navigate via I-90, I-82, and US-97, which keeps the pace steady and predictable. The longest uninterrupted stretch you will encounter is a 100.5-mile segment on I-90, allowing you to settle into a comfortable rhythm behind the wheel. Because this is a highway-focused drive, the character of the road is consistent and fast-moving rather than technical or winding. You can anticipate a smooth transit that prioritizes speed and ease of navigation over stop-and-go local traffic.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 90 is the longest continuous segment at about 100.5 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 90 and I 82. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes early in the drive near Broadway.

Route Complexity 9/10

High effort - long or complex enough to need steady focus all day

This is a demanding drive. With 14 significant decision points across 229.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: near the start (Broadway): Lane positioning matters here; at 10.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 29.5 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 14 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

6
0 mi into trip | ~0m in | Broadway

Turn right onto Broadway

Lane positioning matters here

Use the none lane.
8
10.6 mi into trip | ~14m in

Take the exit toward I 405 South: Bellevue, Renton

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 182 Toward I 405 South: Bellevue, Renton
8
29.5 mi into trip | ~38m in

Take the exit toward I 90: Spokane, Seattle

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Exit 11 Toward I 90: Spokane, Seattle
7
30 mi into trip | ~39m in

Keep slight left at fork toward I 90 East: Spokane

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight left lane. Toward I 90 East: Spokane
7
131 mi into trip | ~2h 31m in | US 97

Take the exit onto US 97 toward I 82 East, US 97 South: Yakima

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Toward I 82 East, US 97 South: Yakima

Towns Along This Route

On the drive from Everett, WA to Benton City, WA, road signs begin pointing toward Seattle along the way.

Seattle

29.5 mi in | ~38m

Main Roads

Road Distance Duration
I 90 100.5 mi 1h 51m
I 82 58.8 mi 1h 3m
US 97 37.8 mi 42m
I 405 18 mi 22m
I 5 9 mi 11m
Broadway 1.1 mi 1m
Babs Avenue 0.5 mi 1m
1st Street 0.5 mi 1m
Longest stretch: I 90 — 100.5 mi, about 1h 51m

Turn-by-Turn Driving Directions

Step-by-step road directions between Everett, WA and Benton City, WA.

1

Start on Hewitt Avenue

128 ft · 6 sec · Hewitt Avenue
2

Turn right onto Broadway

1.1 mi · 1 min · Broadway
Use the none lane.
3

Take the ramp

156 ft · 3 sec
4

Keep slight right at fork

0.4 mi · 57 sec
Toward I 5 South
5

Merge onto I 5

9.0 mi · 11 min · I 5
Use the none / straight / slight right lanes.
6

Take the exit

0.9 mi · 1 min
Exit 182 Toward I 405 South: Bellevue, Renton Use the straight / slight right lanes.
7

Merge onto I 405

0.9 mi · 1 min · I 405
8

Keep slight right at fork onto I 405

17 mi · 21 min · I 405
Use the none lane.
9

Take the exit

0.5 mi · 1 min
Exit 11 Toward I 90: Spokane, Seattle Use the slight right lane.
10

Keep slight left at fork

0.5 mi · 1 min
Toward I 90 East: Spokane Use the slight left lane.
11

Merge onto I 90

101 mi · 1 hr 51 min · I 90
Use the none lane.
12

Take the exit onto US 97

38 mi · 42 min · US 97
Toward I 82 East, US 97 South: Yakima Use the straight / slight right lanes.
13

Keep slight left at fork onto I 82; US 12

59 mi · 1 hr 3 min · I 82; US 12
14

Take the exit

0.3 mi · 27 sec
Toward SR 224 east, SR 225 north: West Richland, Benton City
15

Turn left onto WA 224

356 ft · 8 sec · 1st Street
16

Enter roundabout onto WA 225

140 ft · 2 sec · 1st Street
17

Continue on WA 225

0.4 mi · 52 sec · 1st Street
18

Continue on WA 225

0.5 mi · 1 min · Babs Avenue
19

Turn slight right onto WA 225

0.4 mi · 57 sec · 9th Street
20

Arrive at destination

WA 225

Trip Plan

To make the most of your 4-hour and 21-minute trip, plan for at least one dedicated stop to break up the drive. Since the route is entirely manageable in one day, your best strategy is to leave early in the morning to avoid heavy traffic patterns common on major interstates. Keep a close eye on your fuel gauge during the long 100.5-mile stretch on I-90, as you will want to ensure you have plenty of gas before entering more isolated sections. Flexibility is your biggest advantage here, so use your single planned stop as a chance to stretch your legs and refresh before the final leg of the journey into Benton City.

Morning Departure

An early start around 7-8 AM gets you there with plenty of daylight left.

Evening Departure

A late afternoon start means arriving after dark. Morning is better.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 114.6 miles from Everett, WA, or about 2h 13m into the drive.
The longest continuous stretch on this route runs about 100.5 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 35m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 114.6 miles or 2h 13m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 3h 35m

Traffic, exits, and arrival timing usually matter more near Benton City, WA than in the middle of the route.

Before You Leave

+

Open the route before leaving Everett, WA so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Everett, WA

This is one driving day of about 229.3 miles and 4h 21m.

Your first comfortable stop window is around 80 miles from Everett, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on I 90 for about 100.5 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 114.6 mi from Everett, WA · 2h 13m into the drive

Downtown Monroe, WA, WA

Mid-route town

Meal stop

Monroe, WA

115 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Monroe, WA

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Yakima, WA

Meal break

The midpoint is around 114.6 miles from Everett, WA, which is a good place for a longer meal and fuel stop.

Before the longest stretch

Fuel check

Top up before I 90 if your tank is already low. That segment runs about 100.5 miles.

Arriving in Benton City, WA

The final approach into Benton City, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Benton City, WA.

After long uninterrupted mileage, take five minutes before the last urban segment to reset and refocus on exits, merges, and city traffic.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$48.13 one way

$96.25 round trip

$5.33/gal 25.4 MPG avg 80 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $5.57 $50.26 $100.51
premium $5.77 $52.10 $104.20
diesel $5.64 $50.94 $101.89

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$48

Meals

$25–$50

Total

$73–$98

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 80.2 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $24 in charging · 0 stops · 66% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 68.8 0 $24.08 $11.01
Efficient EV 57.3 0 $20.06 $9.17
EV Truck/SUV 91.7 1 $32.10 $14.68

Gas CO2

80 kg

EV CO2

27 kg (66% less)

Plan for 0 charging stops, roughly every 270 miles. Allow 25-40 minutes per stop at a DC fast charger.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Everett, WA

Evening in Everett on Sunday

Local time

6:40 PM

PDT

Current temp

44°F

Unavailable

Live forecast

Destination

Benton City, WA

Evening in Benton City on Sunday

Local time

6:40 PM

PDT

Current temp

38°F

Unavailable

Live forecast

Along the Route

52°F

Monroe, WA

115 mi in

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

6 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

4h 21m on the road

An early start around 7-8 AM gets you there with plenty of daylight left.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Everett, WA to Benton City, WA covers 229.3 miles and takes about 4h 21m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 90, I 82, US 97. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 114.6 miles from Everett, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $48.13 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.
This is a demanding drive. With 14 significant decision points across 229.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: near the start (Broadway): Lane positioning matters here; at 10.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 29.5 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
On the drive from Everett, WA to Benton City, WA, road signs begin pointing toward Seattle along the way.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Benton City, WA to Everett, WA

Plan the drive back the other way.

228.9 mi 4h 21m

Explore more options from Everett, WA or browse trips ending in Benton City, WA.

Looking for more statewide routes? Browse WA road trips.

Explore maps for Everett, WA or Benton City, WA on MapSof.net.