This 183.2-mile drive from Blanchard to Youngstown, Ohio, is a straightforward, highway-focused journey that can easily be completed in a single day, taking approximately 3 hours and 32 minutes. You'll spend about 96% of your time on major highways, primarily using US 30, I-76, and I-71. The estimated fuel cost for this trip is around $28, making it an economical option. Given its relatively short duration and highway nature, this route is ideal for a day trip, allowing for flexibility in your departure and arrival times without needing an overnight stop. It's a practical drive through the Midwest, connecting two points within Ohio.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
1 planned break
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
91.6 miles from Blanchard, OH
A natural place for your longest stop of the day
, about 1h 46m into the drive
.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 3h 32m. Total distance: 183.2 miles.
Family Friendly
Moderate complexity with 1 natural rest stops along the way.
Solo Traveler
3h 32m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (96%). Some complex stretches to watch for.
Drive Character
Expect a predominantly highway-focused experience on this route, with a substantial 96% of the journey taking place on major roads. The longest uninterrupted stretch you'll encounter is 71.2 miles on US 30, offering a good amount of time to settle into a rhythm. While the bulk of the drive involves interstate travel, the transitions between US 30, I-76, and I-71 will keep the route dynamic enough to prevent monotony. This is a route designed for efficient travel across Ohio, prioritizing speed and directness over scenic detours.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
US 30 is the longest continuous segment at about 71.2 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on US 30 and I 76. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 111.8 miles in.
Driving Effort9/10
High effort - long or complex enough to need steady focus all day
Balances navigation complexity with total wheel time.
This is a demanding drive. With 16 significant decision points across 183.2 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 111.8 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 112.1 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one; at 130.2 miles (I 76 / Kenmore Expressway): Highway fork - watch signs carefully. Lane positioning matters here.
Critical Maneuvers
5 of 16 key points
These are the spots where you need to pay the most attention. Preview them before you drive.
8
111.8 mi into trip|~2h 7m in
Take the exit toward I 76, US 224: Lodi, Akron
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 209A-B
Toward I 76, US 224: Lodi, Akron
9
112.1 mi into trip|~2h 8m in
Keep slight right at fork toward I 76, US 224 East: Akron
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the straight / slight right lanes.
Exit 209A
Toward I 76, US 224 East: Akron
6
130.2 mi into trip|~2h 30m in|I 76 / Kenmore Expressway
Keep slight right at fork onto I 76 / Kenmore Expressway
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight right lane.
7
132.1 mi into trip|~2h 32m in|I 76
Keep slight right at fork onto I 76 toward I 76 East: Akron
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight / slight right lanes.
Toward I 76 East: Akron
6
133.3 mi into trip|~2h 34m in|I 76; I 77
Keep slight left at fork onto I 76; I 77
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight / slight right lanes.
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
On the drive from Blanchard, OH to Youngstown, OH, road signs begin pointing toward Akron along the way.
Akron
111.8 mi in|~2h 7m
Main Roads
Road
Distance
Duration
US 30
71.2 mi
1h 18m
I 76
57.6 mi
1h 6m
I 71
31.9 mi
34m
I 680
5.9 mi
8m
I 80
4 mi
4m
United States Highway 68
3.4 mi
4m
Main Street
3.3 mi
5m
Kenmore Expressway
1.9 mi
2m
Longest stretch:
US 30
— 71.2 mi, about 1h 18m
Turn-by-Turn Driving Directions
Step-by-step road directions between Blanchard, OH and Youngstown, OH.
1
Start on SR 701
0.8 mi·1 min·SR 701
2
Turn left onto US 68
3.4 mi·4 min·United States Highway 68
3
Continue on US 68
3.3 mi·5 min·Main Street
4
Take the ramp
0.4 mi·1 min
5
Merge onto US 30
25 mi·27 min·US 30
6
Take the exit onto US 30
46 mi·51 min·US 30
Use the straight / slight right lanes.
7
Take the exit
0.8 mi·1 min
Exit 176Toward I 71 North: Cleveland
8
Merge onto I 71
32 mi·34 min·I 71
Use the straight / slight right lanes.
9
Take the exit
0.2 mi·28 sec
Exit 209A-BToward I 76, US 224: Lodi, AkronUse the slight right lane.
10
Keep slight right at fork
0.9 mi·1 min
Exit 209AToward I 76, US 224 East: AkronUse the straight / slight right lanes.
11
Merge onto I 76; US 224
17 mi·20 min·I 76; US 224
Use the straight / right lanes.
12
Keep slight right at fork onto I 76
1.9 mi·2 min·Kenmore Expressway
Use the slight right lane.
13
Keep slight right at fork onto I 76
1.2 mi·1 min·I 76
Toward I 76 East: AkronUse the straight / slight right lanes.
14
Keep slight left at fork onto I 76; I 77
39 mi·43 min·I 76; I 77
Use the straight / slight right lanes.
15
Continue on I 80
4.0 mi·4 min·I 80
16
Keep slight right at fork onto I 680
5.9 mi·8 min·I 680
Toward I 680: Youngstown
17
Take the exit
0.2 mi·39 sec
18
Turn sharp left onto Market Street
0.6 mi·59 sec·Market Street
19
Keep slight right at fork onto Central Square
124 ft·2 sec·Central Square
20
Arrive at destination
Central Square
Trip Plan
For this efficient 3-hour and 32-minute drive, you have the flexibility to leave whenever suits your schedule. With only one recommended stop and a fuel cost of approximately $28, planning is minimal. Consider starting your drive in the morning to take advantage of daylight and avoid potential evening traffic. The longest continuous segment is over 71 miles on US 30, so be mindful of that stretch for any necessary breaks or fuel. Given the short distance, you won't need to split this journey, but if you do opt for a stop, it's best to break up the longer 71.2-mile section on US 30.
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 91.6 miles from Blanchard, OH, or about 1h 46m into the drive.
The longest continuous stretch on this route runs about 71.2 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 40 miles or 48m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 91.6 miles or 1h 46m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 2h 53m
Traffic, exits, and arrival timing usually matter more near Youngstown, OH than in the middle of the route.
Before You Leave
+
Open the route before leaving Blanchard, OH so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Blanchard, OH
This is one driving day of about 183.2 miles and 3h 32m.
Your first comfortable stop window is around 40 miles from Blanchard, OH.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on US 30 for about 71.2 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 91.6 mi from Blanchard, OH
· 1h 46m into the drive
Place data sourced from public business listings. Hours and availability may vary.
Fuel & Cost
Regular Gas
$28.43 one way
$56.86 round trip
$3.94/gal25.4 MPG avg64 kg CO2
Fuel Type
$/gal
One Way
Round Trip
midgrade
$4.38
$31.56
$63.11
premium
$4.91
$35.41
$70.81
diesel
$5.61
$40.45
$80.90
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$28
Meals
$25–$50
Total
$53–$78
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 64.1 kg one way.
Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $19 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
55
0
$19.24
$8.79
Efficient EV
45.8
0
$16.03
$7.33
EV Truck/SUV
73.3
0
$25.65
$11.72
Gas CO2
64 kg
EV CO2
21 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 15, 2026
Origin
Blanchard, OH
Morning
in Blanchard on Friday
Local time
8:12 AM
EDT
Current temp
51°F
Unavailable
Live forecast
Destination
Youngstown, OH
Morning
in Youngstown on Friday
Local time
8:12 AM
EDT
Current temp
68°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
17 degrees warmer at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
3h 32m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Blanchard, OH to Youngstown, OH covers 183.2 miles and takes about 3h 32m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are US 30, I 76, I 71. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 91.6 miles from Blanchard, OH. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $28.43 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a demanding drive. With 16 significant decision points across 183.2 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 111.8 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 112.1 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one; at 130.2 miles (I 76 / Kenmore Expressway): Highway fork - watch signs carefully. Lane positioning matters here.
On the drive from Blanchard, OH to Youngstown, OH, road signs begin pointing toward Akron along the way.
How this page is built
Compiled and maintained by the Trip.ovh planning team at COD Solutions Oy (Helsinki). Each route is built from authoritative open government and mapping datasets rather than crowdsourced reviews. Distances and geometry come from
OSRM
over
OpenStreetMap.
Fuel cost uses
EIA
weekly regional averages.
Pages are published only after passing our data-quality checks; our
methodology page
documents refresh cadence, editorial standards, and known limitations.
