Skip to main content

Trip from Brent, FL to Youngstown, FL

Data updated 31 minutes ago

Drive Time

2h 40m

Distance

136.4 mi

220 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$22

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 32 min
4 AM
2h 30m ★
6 AM
2h 41m
8 AM
3h 2m
10 AM
2h 48m
12 PM
2h 46m
3 PM
2h 49m
5 PM
3h 1m
8 PM
2h 35m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Brent, FL, FL

Brent, FL

DΛVΞ GΛRCIΛ

Downtown Youngstown, FL, FL

Youngstown, FL

Samuel Etienne

Trip Overview

This 136.4-mile drive from Brent, Florida, to Youngstown, Florida, is a straightforward trip that can easily be completed in a single day. Expect to spend around 2 hours and 40 minutes on the road, primarily on I-10 and State Highway 20 East, with a small portion on US Highway 331 South. With 98% of the drive on highways, it’s a focused journey. The estimated fuel cost is about $22, making it an economical option for a quick getaway or a visit within the state of Florida. This route is designed for efficient travel, allowing you to reach your destination without the need for an overnight stay.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

1 planned break

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

68.2 miles from Brent, FL

A natural place for your longest stop of the day , about 1h 15m into the drive .

Loading map...

Drive Character

You'll find yourself on a highway-focused drive for nearly the entire 136.4 miles. The majority of your travel will be on I-10, offering stretches of consistent speed. Be prepared for the longest uninterrupted segment of 71.2 miles on I-10, which means you'll want to plan your fuel and rest stops accordingly. While predominantly highway, the inclusion of State Highway 20 East and US Highway 331 South introduces slight variations in the driving experience as you progress toward Youngstown. Overall, the character is one of steady progress on well-maintained roads.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 13 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 10 is the longest continuous segment at about 71.2 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 10 and State Highway 20 East. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.9 miles in.

Route Complexity 7/10

Demanding - plan breaks and stay ahead of the key maneuvers

This is a demanding drive. With 8 significant decision points across 136.4 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 0.9 miles: Highway fork - watch signs carefully. Lane positioning matters here; at 2.3 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one; at 2.6 miles: Highway fork - watch signs carefully.

Critical Maneuvers

5 of 8 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

7
0.9 mi into trip | ~2m in

Keep slight left at fork toward I 110 North

Highway fork - watch signs carefully. Lane positioning matters here

Use the straight / slight right lanes. Toward I 110 North
9
2.3 mi into trip | ~4m in

Keep slight right at fork toward I 10 East, FL 291: Tallahassee, Davis Highway

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 6 Toward I 10 East, FL 291: Tallahassee, Davis Hi...
5
2.6 mi into trip | ~4m in

Keep slight left at fork toward I 10 East: Tallahassee

Highway fork - watch signs carefully

Toward I 10 East: Tallahassee
5
3.3 mi into trip | ~5m in | I 10

Merge onto I 10

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
6
74.5 mi into trip | ~1h 22m in

Take the exit toward US 331: DeFuniak Springs, Freeport

Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one

Exit 85 Toward US 331: DeFuniak Springs, Freeport

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Brent, FL to Youngstown, FL, road signs begin pointing toward Freeport along the way.

Freeport

74.5 mi in | ~1h 22m

Main Roads

Road Distance Duration
I 10 71.2 mi 1h 16m
State Highway 20 East 42.5 mi 54m
US Highway 331 South 14.1 mi 16m
US 231 5 mi 6m
Reubin O'Donovan Askew Parkway 0.9 mi 1m
Brent Lane 0.4 mi 1m
East Brent Lane 0.1 mi <1m
Longest stretch: I 10 — 71.2 mi, about 1h 16m

Turn-by-Turn Driving Directions

Step-by-step road directions between Brent, FL and Youngstown, FL.

1

Start on East Brent Lane

0.1 mi · 26 sec · East Brent Lane
2

Continue on FL 296

0.4 mi · 1 min · Brent Lane
3

Turn left

0.3 mi · 36 sec
4

Keep slight left at fork

0.5 mi · 54 sec
Toward I 110 North Use the straight / slight right lanes.
5

Merge onto I 110

0.9 mi · 1 min · Reubin O'Donovan Askew Parkway
6

Keep slight right at fork

0.3 mi · 28 sec
Exit 6 Toward I 10 East, FL 291: Tallahassee, Davis Highway Use the straight / slight right lanes.
7

Keep slight left at fork

0.7 mi · 1 min
Toward I 10 East: Tallahassee
8

Merge onto I 10

71 mi · 1 hr 16 min · I 10
Use the straight / slight right lanes.
9

Take the exit

0.3 mi · 42 sec
Exit 85 Toward US 331: DeFuniak Springs, Freeport
10

Turn right onto US 331

14 mi · 16 min · US Highway 331 South
11

Turn left onto FL 20

42 mi · 54 min · State Highway 20 East
Use the left lane.
12

Turn right onto US 231

5.0 mi · 6 min · US 231
13

Arrive at destination

US 231

Trip Plan

Given the 2 hour and 40-minute duration, this trip is best tackled as a day excursion. Aim to depart in the morning to maximize your time at your destination. With only one recommended stop, you have flexibility in pacing yourself. Keep an eye on your fuel gauge, especially before embarking on the 71.2-mile stretch on I-10, as services can be spaced out. The estimated fuel cost of $22 is a helpful budget point. For a practical tip, consider downloading offline maps for I-10 as cell service can be spotty in some sections of this highway-heavy route.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 68.2 miles from Brent, FL, or about 1h 15m into the drive.
The longest continuous stretch on this route runs about 71.2 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 29m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 68.2 miles or 1h 15m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 2h 9m

Traffic, exits, and arrival timing usually matter more near Youngstown, FL than in the middle of the route.

Before You Leave

+

Open the route before leaving Brent, FL so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Brent, FL

This is one driving day of about 136.4 miles and 2h 40m.

Your first comfortable stop window is around 80 miles from Brent, FL.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on I 10 for about 71.2 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 68.2 mi from Brent, FL · 1h 15m into the drive

city in Okaloosa County, Florida, United States

Mid-route town

Meal stop

Destin, FL

68 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Destin, FL

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Destin, FL

Meal break

The midpoint is around 68.2 miles from Brent, FL, which is a good place for a longer meal and fuel stop.

Before the longest stretch

Fuel check

Top up before I 10 if your tank is already low. That segment runs about 71.2 miles.

Arriving in Youngstown, FL

The final approach into Youngstown, FL usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Youngstown, FL.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$21.71 one way

$43.42 round trip

$4.04/gal 25.4 MPG avg 48 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.40 $23.62 $47.24
premium $4.72 $25.36 $50.73
diesel $5.61 $30.12 $60.23

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$22

Meals

$25–$50

Total

$47–$72

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 47.7 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $14 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 40.9 0 $14.32 $6.55
Efficient EV 34.1 0 $11.94 $5.46
EV Truck/SUV 54.6 0 $19.10 $8.73

Gas CO2

48 kg

EV CO2

16 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 7 hours ago

Origin

Brent, FL

Late night in Brent on Wednesday

Local time

1:26 AM

CDT

Current temp

80°F

Sunny

S 10 mph 0% chance Live forecast

Rip Current Statement

Rip Current Statement issued April 14 at 4:28PM EDT until April 16 at 8:00PM EDT by NWS Miami FL

Rip Current Statement

Rip Current Statement issued April 14 at 12:29PM EDT until April 15 at 2:00AM EDT by NWS Tallahassee FL

Destination

Youngstown, FL

Late night in Youngstown on Wednesday

Local time

1:26 AM

CDT

Current temp

87°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

7 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

2h 40m on the road

The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Brent, FL to Youngstown, FL covers 136.4 miles and takes about 2h 40m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 10, State Highway 20 East, US Highway 331 South. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 68.2 miles from Brent, FL. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $21.71 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a demanding drive. With 8 significant decision points across 136.4 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 0.9 miles: Highway fork - watch signs carefully. Lane positioning matters here; at 2.3 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one; at 2.6 miles: Highway fork - watch signs carefully.
On the drive from Brent, FL to Youngstown, FL, road signs begin pointing toward Freeport along the way.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Brent, FL or browse trips ending in Youngstown, FL.

Looking for more statewide routes? Browse FL road trips.

Explore maps for Brent, FL or Youngstown, FL on MapSof.net.