Trip from Brooklyn, NY to Howard, NY

Drive Time

6h

Distance

294 mi

Route Type

Turn-heavy local drive

Long day trip

Trip Overview

The drive from Brooklyn, NY to Howard, NY covers 294 miles and takes about 6h behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Snyder Avenue, Rogers Avenue, Church Avenue for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $46.40 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is possible, but it will make for a full day on the road.

Break Rhythm

1 planned break

Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.

Midpoint

147 miles from Brooklyn, NY

A natural place for your longest stop of the day.

Drive Character

Expect a 6h drive with frequent turns across 294 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.

There are about 37 navigation steps in the underlying route data, so the final approach matters more than the middle miles.

Snyder Avenue is one of the defining roads on this drive.

Main Roads

Road	Distance	Duration
Snyder Avenue	0 mi	0m
Rogers Avenue	0 mi	0m
Church Avenue	0 mi	0m
Prospect Expressway	0 mi	0m
I 278 East	0 mi	0m
Gowanus Expressway	0 mi	0m
Hugh L Carey Tunnel	0 mi	0m
NY 9A North	0 mi	0m

Longest stretch: Snyder Avenue — 0 mi, about 0m

Step-by-Step Directions

1

Start on Nostrand Avenue

2

Turn right onto Snyder Avenue

3

Turn right onto Rogers Avenue

4

Turn left onto Church Avenue

5

Turn right onto Prospect Expressway

6

Keep slight left to continue on I 278 East: Queens, Bronx

7

Merge slight left onto Gowanus Expressway

8

Keep slight left to continue on Hugh L Carey Tunnel, Manhattan

9

Keep slight right to continue on NY 9A North: West Street, Holland Tunnel, Lincoln Tunnel, George Washington Bridge

10

Turn right onto West Street

11

Turn right onto Vestry Street

12

Turn left onto Hudson Street

13

Take the exit slight right toward I 78: Holland Tunnel, New Jersey

14

Merge slight left onto Holland Tunnel

15

Continue on 14th Street

16

Keep slight left to continue on 14th Street Viaduct

17

Continue on NJ 139 Lower Level

18

Continue on Pulaski Skyway

19

Take the exit slight right toward US 1-9 North: Secausus

20

Turn right onto Tonnelle Avenue

21

Turn straight

22

Merge slight right

23

Take the exit slight left toward I 80 West: Dover, Del Water Gap

24

Continue on Interstate 80 West

25

Take the exit slight left toward I 80 West: Delaware Water Gap

26

Merge slight left onto Christopher Columbus Highway

27

Keep slight left to continue on Keystone Shortway

28

Keep slight left to continue on Keystone Shortway

29

Take the exit slight right toward I 380 North: Scranton

30

Continue straight

31

Merge slight right

32

Keep slight left to continue on I 86: Corning

33

Keep slight right to continue on Southern Tier Expressway

34

Take the exit slight right toward CR 70: Howard

35

Turn left onto County Route 70

36

Turn left onto County Route 70A

37

Arrive at your destination

When to Leave

Morning Departure

Start early — leave by 6-7 AM to arrive at a reasonable hour.

Evening Departure

This is a long drive — plan for a morning departure or consider splitting it into two days.

You can normally do this drive in one day.

Plan roughly 1 meaningful break for fuel, food, and rest.

The halfway point lands around 147 miles from Brooklyn, NY.

This is a comfortable same-day trip.

Drive Plan

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 147 miles

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Last hour of driving

Traffic, exits, and arrival timing usually matter more near Howard, NY than in the middle of the route.

Before You Leave

+

Open the route before leaving Brooklyn, NY so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Trip Strategy

Day 1

Settle into the route from Brooklyn, NY

This is one driving day of about 294 miles and 6h.

Your first comfortable stop window is around 80 miles from Brooklyn, NY.

This route can stay practical as a one-day drive if traffic stays reasonable.

Plan about 1 real break rather than only quick fuel stops.

Best Stop Towns on This Route

These towns line up with the pace of this drive and give you clearer places to stop with a purpose.

Late stop town

Meal stop

Ramapo, NY

147 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Travel Advice

Arrival Notes

The final approach into Howard, NY usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Howard, NY.

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Stops Along the Way

Halfway Point

Midpoint

About 147 mi from Brooklyn, NY

Ramapo, NY

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Ramapo, NY

Meal break

The midpoint is around 147 miles from Brooklyn, NY, which is a good place for a longer meal and fuel stop.

These stop ideas are pacing suggestions for the drive, so the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Fuel Type	$/gal	One Way	Round Trip
regular	$4.01	$46.40	$92.81
midgrade	$4.48	$51.87	$103.73
premium	$4.86	$56.27	$112.53
diesel	$4.69	$54.33	$108.66

Based on 25.4 MPG average. Estimated CO2 emission: 102.9 kg one way.

Frequently Asked Questions

The drive from Brooklyn, NY to Howard, NY covers 294 miles and takes about 6h without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Snyder Avenue, Rogers Avenue, Church Avenue. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 147 miles from Brooklyn, NY. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $46.40 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Start early — leave by 6-7 AM to arrive at a reasonable hour. This is a long drive — plan for a morning departure or consider splitting it into two days.

Plan about 1 meaningful break for fuel, food, or rest. Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.