Trip from Howard, NY to Brooklyn, NY

Drive Time

5h 5m

Distance

289.2 mi

Route Type

Turn-heavy local drive

Long day trip

Trip Overview

The drive from Howard, NY to Brooklyn, NY covers 289.2 miles and takes about 5h 5m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Route 70A, Route 70, Southern Tier Expressway for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $45.65 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is possible, but it will make for a full day on the road.

Break Rhythm

1 planned break

Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.

Midpoint

144.6 miles from Howard, NY

A natural place for your longest stop of the day.

Drive Character

Expect a 5h 5m drive with frequent turns across 289.2 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 34 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Route 70A is one of the defining roads on this drive.

Main Roads

Road Distance Duration
Route 70A 0 mi 0m
Route 70 0 mi 0m
Southern Tier Expressway 0 mi 0m
I 81 South 0 mi 0m
Grand Army of the Republic Highway 0 mi 0m
I 84 East 0 mi 0m
I 380 South 0 mi 0m
I 80 East 0 mi 0m
Longest stretch: Route 70A — 0 mi, about 0m

Step-by-Step Directions

1

Start on County Route 70A

2

Turn right onto County Route 70

3

Take the ramp right

4

Merge slight left onto Southern Tier Expressway

5

Keep slight right to continue on I 81 South: Scranton

6

Keep slight right to continue on Grand Army of the Republic Highway

7

Continue on I 84 East, I 380 South: Mount Pocono, Milford

8

Keep slight right to continue on I 380 South: Mount Pocono

9

Keep slight left to continue on I 80 East: Stroudsburg

10

Merge slight right onto Keystone Shortway

11

Take the exit slight left toward I 280 East: The Oranges, Newark

12

Continue on Essex Freeway

13

Take the exit slight right toward CR 508 East: Jersey City

14

Merge slight left onto Newark-Jersey City Turnpike

15

Continue on New Wittpenn Bridge

16

Take the exit slight right toward NJ 139 East: Hoboken, Holland Tunnel

17

Keep slight left to continue on Holland Tunnel, Lincoln Tunnel

18

Turn straight

19

Merge slight right onto Conrail Viaduct

20

Continue on 12th Street Viaduct

21

Continue on 12th Street

22

Keep slight left to continue on Holland Tunnel

23

Take the exit slight right toward NY 9A

24

Turn slight left onto Laight Street

25

At the end of the road, turn left onto West Street

26

Take the exit slight left toward Hugh L Carey Tunnel, Brooklyn

27

Continue on Gowanus Expressway

28

Take the exit slight left toward NY 27 East: Prospect Expressway

29

Take the exit slight right toward NY 27 East: SUNY Downstate Medical Center

30

Turn left onto Caton Avenue

31

Turn right onto Coney Island Avenue

32

Turn left onto Church Avenue

33

Turn right onto Nostrand Avenue

34

Arrive at your destination

When to Leave

Morning Departure

An early start around 7-8 AM gets you there with plenty of daylight left.

Evening Departure

A late afternoon start means arriving after dark. Morning is better.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 144.6 miles from Howard, NY.

This is a comfortable same-day trip.

Drive Plan

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 144.6 miles

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Last hour of driving

Traffic, exits, and arrival timing usually matter more near Brooklyn, NY than in the middle of the route.

Before You Leave

+

Open the route before leaving Howard, NY so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Trip Strategy

Day 1

Settle into the route from Howard, NY

This is one driving day of about 289.2 miles and 5h 5m.

Your first comfortable stop window is around 80 miles from Howard, NY.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.

Best Stop Towns on This Route

These towns line up with the pace of this drive and give you clearer places to stop with a purpose.

Late stop town

Meal stop

Ramapo, NY

145 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Popular next leg

Ramapo, NY to Brooklyn, NY

50.4 mi · 1h 25m

Travel Advice

Arrival Notes

The final approach into Brooklyn, NY usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Brooklyn, NY.

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Stops Along the Way

Halfway Point

Midpoint

About 144.6 mi from Howard, NY

Syracuse, NY

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Ramapo, NY

Meal break

The midpoint is around 144.6 miles from Howard, NY, which is a good place for a longer meal and fuel stop.

These stop ideas are pacing suggestions for the drive, so the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Fuel Type $/gal One Way Round Trip
regular $4.01 $45.65 $91.29
midgrade $4.48 $51.02 $102.04
premium $4.86 $55.35 $110.69
diesel $4.69 $53.45 $106.89

Based on 25.4 MPG average. Estimated CO2 emission: 101.2 kg one way.

Frequently Asked Questions

The drive from Howard, NY to Brooklyn, NY covers 289.2 miles and takes about 5h 5m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Route 70A, Route 70, Southern Tier Expressway. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 144.6 miles from Howard, NY. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $45.65 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.

More trips to Brooklyn, NY

Next Route Ideas

Explore more options from Howard, NY or browse trips ending in Brooklyn, NY .

Looking for more statewide routes? Browse NY road trips .

Going the other way? Trip from Brooklyn, NY to Howard, NY

Explore maps and details for Howard, NY or Brooklyn, NY on MapSof.net.