Origin
Chevy Chase, MD
Late night in Chevy Chase on Wednesday
Local time
2:50 AM
EDT
Current temp
88°F
Unavailable
Live forecast
Trip from Chevy Chase, MD to Redland, MD
Data updated 0 seconds ago
Drive Time
25m
Distance
15.1 mi
24 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$3
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
0h 23m
★
6 AM
0h 25m
8 AM
0h 29m
10 AM
0h 27m
12 PM
0h 26m
3 PM
0h 27m
5 PM
0h 29m
8 PM
0h 24m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Chevy Chase, MD
Wikimedia Commons
Redland, MD
Stepan Vrany
Trip Overview
This 15.1-mile drive from Chevy Chase, MD to Redland, MD is a quick trip, estimated to take around 25 minutes. You'll primarily navigate on I-270 and the Capital Beltway, with a portion on Shady Grove Road, making it a 54% highway experience. Given its short distance and duration, this route is ideal for a single-day trip; no overnight stay is necessary. The estimated fuel cost is a modest $3, making it an economical choice. This journey stays within the Northeast region, offering a straightforward connection between two points in Maryland.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
7.5 miles from Chevy Chase, MD
A natural place for your longest stop of the day , about 12m into the drive .
Loading map...
Drive Character
Expect a mixed drive on this route, with a significant 54% of it being highway. The longest uninterrupted stretch you'll encounter is 8.1 miles on I-270, offering a period of consistent speed. While much of the drive is on major roadways like I-270 and the Capital Beltway, you'll also transition to Shady Grove Road, which will likely offer a change of pace. This blend means you'll experience both faster-paced interstate travel and potentially more local road conditions as you approach your destination.
Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 18 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 270 is the longest continuous segment at about 8.1 miles.
How Hard Is This Drive?
This route mixes highway mileage with some local-road sections near the start or finish. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 2.8 miles in near I 270.
Route Complexity
8/10
Demanding - plan breaks and stay ahead of the key maneuvers
This is a demanding drive. With 13 significant decision points across 15.1 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 2.8 miles (I 270): Highway fork - watch signs carefully. Lane positioning matters here; at 6.4 miles (I 270): Highway fork - watch signs carefully. Lane positioning matters here; at 11 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
Critical Maneuvers
5 of 13 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
8
2.8 mi into trip
|
~5m in
|
I 270
Keep slight right at fork onto I 270 toward I 270 North: Frederick
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight / slight right lanes.
Exit 35
Toward I 270 North: Frederick
7
6.4 mi into trip
|
~10m in
|
I 270
Keep slight right at fork onto I 270 toward I 270 North
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight right lane.
Toward I 270 North
8
11 mi into trip
|
~16m in
Take the exit toward Shady Grove Road, Redland Boulevard
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 8
Toward Shady Grove Road, Redland Boulevard
6
11.1 mi into trip
|
~17m in
Keep slight left at fork toward Shady Grove Road
Highway fork - watch signs carefully
Toward Shady Grove Road
9
11.3 mi into trip
|
~17m in
Keep slight right at fork toward Shady Grove Road East, Gaithersburg
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Toward Shady Grove Road East, Gaithersburg
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Chevy Chase, MD and Redland, MD, road signs point toward Frederick, Shady Grove Road East and Gaithersburg.
Frederick
0.8 mi in
|
~2m
Shady Grove Road East
11.3 mi in
|
~17m
Gaithersburg
11.3 mi in
|
~17m
Main Roads
| Road | Distance | Duration |
|---|---|---|
| I 270 | 8.1 mi | 11m |
| Shady Grove Road | 3.4 mi | 6m |
| Capital Beltway | 1.7 mi | 2m |
| Muncaster Mill Road | 0.3 mi | <1m |
| Connecticut Avenue | 0.3 mi | <1m |
| Montrose Driveway | 0.2 mi | <1m |
| Stewart Driveway | 0.1 mi | <1m |
| Clifford Avenue | <0.1 mi | <1m |
Longest stretch:
I 270
— 8.1 mi, about 11m
Turn-by-Turn Driving Directions
Step-by-step road directions between Chevy Chase, MD and Redland, MD.
1
Start on Hutch Place
133 ft
·
12 sec
·
Hutch Place
2
Turn left onto Clifford Avenue
450 ft
·
22 sec
·
Clifford Avenue
3
Turn right onto Kenilworth Driveway
363 ft
·
15 sec
·
Kenilworth Driveway
4
Continue on Montgomery Avenue
444 ft
·
19 sec
·
Montgomery Avenue
5
Continue on Stewart Driveway
0.1 mi
·
28 sec
·
Stewart Driveway
6
Turn right onto Montrose Driveway
0.2 mi
·
44 sec
·
Montrose Driveway
7
Turn right onto MD 185
0.3 mi
·
26 sec
·
Connecticut Avenue
8
Take the ramp
0.3 mi
·
40 sec
Toward I 495 West: Northern Virginia, Frederick
9
Merge onto I 495
1.7 mi
·
2 min
·
Capital Beltway
Use the straight / slight right lanes.
10
Keep slight right at fork onto I 270
3.6 mi
·
4 min
·
I 270
Exit 35
Toward I 270 North: Frederick
Use the straight / slight right lanes.
11
Keep slight right at fork onto I 270
4.6 mi
·
6 min
·
I 270
Toward I 270 North
Use the slight right lane.
12
Take the exit
0.2 mi
·
19 sec
Exit 8
Toward Shady Grove Road, Redland Boulevard
Use the slight right lane.
13
Keep slight left at fork
0.2 mi
·
21 sec
Toward Shady Grove Road
14
Keep slight right at fork
442 ft
·
10 sec
Toward Shady Grove Road East, Gaithersburg
Use the slight right lane.
15
Turn straight onto Shady Grove Road
3.4 mi
·
6 min
·
Shady Grove Road
16
Turn right onto MD 115
0.3 mi
·
35 sec
·
Muncaster Mill Road
17
Turn right onto Redland Road
96 ft
·
2 sec
·
Redland Road
18
Arrive at destination
Redland Road
Trip Plan
For this short 25-minute journey covering 15.1 miles, flexibility is key. You can easily tackle this drive any time of day without needing to break it up. The $3 fuel cost suggests you won't need frequent stops for gas. Plan to leave when it's most convenient for you, keeping in mind potential traffic on the Capital Beltway and I-270, especially during peak hours. A practical tip is to familiarize yourself with the specific exits for Shady Grove Road well in advance, as this transition point can be busy.
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 7.5 miles from Chevy Chase, MD, or about 12m into the drive.
The longest continuous stretch on this route runs about 8.1 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 15.1 miles or 25m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 7.5 miles or 12m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 20m
Traffic, exits, and arrival timing usually matter more near Redland, MD than in the middle of the route.
Before You Leave
+
Open the route before leaving Chevy Chase, MD so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Chevy Chase, MD
This is one driving day of about 15.1 miles and 25m.
Your first comfortable stop window is around 80 miles from Chevy Chase, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 270 for about 8.1 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 7.5 mi from Chevy Chase, MD · 12m into the drive
Mid-route town
Meal stop
8 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 15.1 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 7.5 miles from Chevy Chase, MD, which is a good place for a longer meal and fuel stop.
Arriving in Redland, MD
The final approach into Redland, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Redland, MD.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$2.50 one way
$5.01 round trip
$4.21/gal
25.4 MPG avg
5 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.61 | $2.74 | $5.48 |
| premium | $4.93 | $2.93 | $5.86 |
| diesel | $5.61 | $3.33 | $6.67 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$3
Meals
$25–$50
Total
$28–$53
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 5.3 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $2 in charging · 0 stops · 60% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 4.5 | 0 | $1.59 | $0.72 |
| Efficient EV | 3.8 | 0 | $1.32 | $0.60 |
| EV Truck/SUV | 6 | 0 | $2.11 | $0.97 |
Gas CO2
5 kg
EV CO2
2 kg (60% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Redland, MD
Late night in Redland on Wednesday
Local time
2:50 AM
EDT
Current temp
87°F
Mostly Sunny
SW 10 mph
12% chance
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
1 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
25m on the road
The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Chevy Chase, MD to Redland, MD covers 15.1 miles and takes about 25m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 270, Shady Grove Road, Capital Beltway. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 7.5 miles from Chevy Chase, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $2.50 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 13 significant decision points across 15.1 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 2.8 miles (I 270): Highway fork - watch signs carefully. Lane positioning matters here; at 6.4 miles (I 270): Highway fork - watch signs carefully. Lane positioning matters here; at 11 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
Between Chevy Chase, MD and Redland, MD, road signs point toward Frederick, Shady Grove Road East and Gaithersburg.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Redland, MD
More from Chevy Chase, MD
More trips to Redland, MD
Explore more options from Chevy Chase, MD or browse trips ending in Redland, MD.
Looking for more statewide routes? Browse MD road trips.
Explore maps for Chevy Chase, MD or Redland, MD on MapSof.net.