Origin
Monroe, WA
Late night in Monroe on Wednesday
Local time
5:10 AM
PDT
Current temp
59°F
Unavailable
Live forecast
Trip from Monroe, WA to Bellevue, WA
Data updated 0 seconds ago
Drive Time
35m
Distance
25.6 mi
41 km
Drive Score
6/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$5
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
0h 33m
★
6 AM
0h 36m
8 AM
0h 42m
10 AM
0h 38m
12 PM
0h 37m
3 PM
0h 38m
5 PM
0h 41m
8 PM
0h 34m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Monroe, WA
Wikimedia Commons
Trip Overview
This straightforward 25.6-mile drive from Monroe to Bellevue, Washington, is easily manageable in about 35 minutes, making it an ideal day trip. You'll spend most of your time on highways, with 92% of the route being on major roads like I-405 and State Highway 522. The estimated fuel cost for this journey is around $5. Given its short distance and focus on highway travel, this route is perfect for a quick commute or a short excursion within the Pacific Coast region. You won't need an overnight stay, offering flexibility in your travel plans.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
12.8 miles from Monroe, WA
A natural place for your longest stop of the day , about 18m into the drive .
Loading map...
Drive Character
Expect a highway-focused experience on this route, with a significant 92% of the drive taking place on major roadways. The longest uninterrupted stretch you'll encounter is 9.7 miles on I-405, indicating a consistent, flowing traffic environment for much of the trip. While predominantly highway, the use of State Highway 522 and State Route 522 suggests you'll transition onto well-maintained state routes as you approach your destination. This profile generally means steady speeds and efficient travel, minimizing delays.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 12 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 405 is the longest continuous segment at about 9.7 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on I 405 and State Highway 522. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.8 miles in near WA 522 / State Highway 522.
Route Complexity
7/10
Demanding - plan breaks and stay ahead of the key maneuvers
This is a demanding drive. With 9 significant decision points across 25.6 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 0.8 miles (WA 522 / State Highway 522): Exit ramp - move to the correct lane early. Lane positioning matters here; at 14.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 24.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.
Critical Maneuvers
5 of 9 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
8
0.8 mi into trip
|
~2m in
|
WA 522 / State Highway 522
Take the exit onto WA 522 / State Highway 522 toward WA 522 West
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the right lane.
Toward WA 522 West
6
14.1 mi into trip
|
~19m in
Take the exit toward I 405 South: Bellevue
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the straight / slight right lanes.
Toward I 405 South: Bellevue
7
24.6 mi into trip
|
~32m in
Take the exit toward Northeast 4th Street
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the straight / slight right lanes.
Exit 13A
Toward Northeast 4th Street
6
24.8 mi into trip
|
~33m in
|
Northeast 4th Street
Turn right onto Northeast 4th Street
Lane positioning matters here
Use the right lane.
7
25.4 mi into trip
|
~35m in
|
Main Street
Turn right onto Main Street
Lane positioning matters here
Use the right lane.
Main Roads
| Road | Distance | Duration |
|---|---|---|
| I 405 | 9.7 mi | 12m |
| State Highway 522 | 7.5 mi | 10m |
| State Route 522 | 5.8 mi | 7m |
| US 2 | 0.6 mi | 1m |
| Northeast 4th Street | 0.3 mi | 1m |
| South Lewis Street | 0.3 mi | <1m |
| 108th Avenue Northeast | 0.3 mi | <1m |
| Main Street | 0.2 mi | <1m |
Longest stretch:
I 405
— 9.7 mi, about 12m
Turn-by-Turn Driving Directions
Step-by-step road directions between Monroe, WA and Bellevue, WA.
1
Start on WA 203
0.3 mi
·
52 sec
·
South Lewis Street
2
Turn left onto US 2
0.6 mi
·
1 min
·
US 2
Use the left lane.
3
Take the exit onto WA 522
7.5 mi
·
10 min
·
State Highway 522
Toward WA 522 West
Use the right lane.
4
Continue on WA 522
5.8 mi
·
7 min
·
State Route 522
Use the straight / right lanes.
5
Take the exit
0.8 mi
·
58 sec
Toward I 405 South: Bellevue
Use the straight / slight right lanes.
6
Turn slight left onto I 405
9.7 mi
·
12 min
·
I 405
Use the straight / slight right lanes.
7
Take the exit
0.2 mi
·
31 sec
Exit 13A
Toward Northeast 4th Street
Use the straight / slight right lanes.
8
Turn right onto Northeast 4th Street
0.3 mi
·
1 min
·
Northeast 4th Street
Use the right lane.
9
Turn left onto 108th Avenue Northeast
0.3 mi
·
33 sec
·
108th Avenue Northeast
Use the left lane.
10
Turn right onto Main Street
0.2 mi
·
35 sec
·
Main Street
Use the right lane.
11
Turn right
45 ft
·
3 sec
12
Arrive at destination
Trip Plan
For this short 35-minute trip covering 25.6 miles, flexibility is your best asset. Consider departing outside of peak commute hours to enjoy the smoothest traffic flow, especially on I-405. With a fuel cost estimated at just $5, you won't need to worry excessively about finding a gas station mid-journey. Keep an eye on your GPS for the transition from I-405 to State Highway 522 as you head towards Bellevue. Since there are no designated stops, you can easily make this a point-to-point drive or add your own brief pauses as needed.
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 12.8 miles from Monroe, WA, or about 18m into the drive.
The longest continuous stretch on this route runs about 9.7 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 25.6 miles or 35m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 12.8 miles or 18m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 29m
Traffic, exits, and arrival timing usually matter more near Bellevue, WA than in the middle of the route.
Before You Leave
+
Open the route before leaving Monroe, WA so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Monroe, WA
This is one driving day of about 25.6 miles and 35m.
Your first comfortable stop window is around 80 miles from Monroe, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 405 for about 9.7 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 12.8 mi from Monroe, WA · 18m into the drive
Mid-route town
Meal stop
13 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 25.6 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 12.8 miles from Monroe, WA, which is a good place for a longer meal and fuel stop.
Arriving in Bellevue, WA
The final approach into Bellevue, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Bellevue, WA.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$5.36 one way
$10.72 round trip
$5.32/gal
25.4 MPG avg
9 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $5.58 | $5.62 | $11.24 |
| premium | $5.77 | $5.81 | $11.63 |
| diesel | $5.61 | $5.65 | $11.30 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$5
Meals
$25–$50
Total
$30–$55
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 9 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $3 in charging · 0 stops · 67% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 7.7 | 0 | $2.69 | $1.23 |
| Efficient EV | 6.4 | 0 | $2.24 | $1.02 |
| EV Truck/SUV | 10.2 | 0 | $3.58 | $1.64 |
Gas CO2
9 kg
EV CO2
3 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Bellevue, WA
Late night in Bellevue on Wednesday
Local time
5:10 AM
PDT
Current temp
45°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
14 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
35m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Monroe, WA to Bellevue, WA covers 25.6 miles and takes about 35m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 405, State Highway 522, State Route 522. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 12.8 miles from Monroe, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $5.36 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 9 significant decision points across 25.6 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 0.8 miles (WA 522 / State Highway 522): Exit ramp - move to the correct lane early. Lane positioning matters here; at 14.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 24.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.
The route from Monroe, WA to Bellevue, WA does not surface many named destination signs beyond the main corridor.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Bellevue, WA
More trips to Bellevue, WA
Explore more options from Monroe, WA or browse trips ending in Bellevue, WA.
Looking for more statewide routes? Browse WA road trips.
Explore maps for Monroe, WA or Bellevue, WA on MapSof.net.