Skip to main content

Trip from Pulaski County, IN to Fishers, IN

Last recalculated Apr 17, 2026

Drive Time

2h 30m

Distance

102.7 mi

165 km

Drive Score

9/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$16

one way

EV Charging

Unknown

Best Time to Leave

Save up to 31 min
4 AM
2h 20m ★
6 AM
2h 30m
8 AM
2h 51m
10 AM
2h 37m
12 PM
2h 35m
3 PM
2h 38m
5 PM
2h 50m
8 PM
2h 24m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Pulaski County, IN, IN

Pulaski County, IN

Provisionshots LLC

city in Hamilton County, Indiana, United States

Fishers, IN

Wikimedia Commons

Trip Overview

The drive from Pulaski County, IN to Fishers, IN covers 102.7 miles and takes about 2h 30m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on US 31, South Huddleston Road, Logansport Bypass for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 31.2 miles on US 31. At current regular gas prices, budget about $16.06 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

1 planned break

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

51.4 miles from Pulaski County, IN

A natural place for your longest stop of the day , about 1h 20m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 2h 30m. Total distance: 102.7 miles.

Family Friendly

Moderate complexity with 1 natural rest stops along the way.

Solo Traveler

2h 30m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (42%). Some complex stretches to watch for.

Drive Character

The drive from Pulaski County, IN to Fishers, IN covers 102.7 miles and takes about 2h 30m, using a mix of highways and local roads.

Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 35 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
US 31 is the longest continuous segment at about 31.2 miles.

How Hard Is This Drive?

This route mixes highway mileage with some local-road sections near the start or finish. You will hit about 25 points where you need to pay attention to lane position or signs. The trickiest moment comes around 86.2 miles in.

Driving Effort 6/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

Balances navigation complexity with total wheel time.

This drive requires moderate attention. Across 102.7 miles you will encounter 25 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: at 86.2 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one; at 93.6 miles: Roundabout - know your exit number before entering; at 94.4 miles (SR 32; SR 38 / Westfield Road): Roundabout - know your exit number before entering.

Critical Maneuvers

5 of 25 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
86.2 mi into trip | ~2h 4m in

Take the exit toward SR 38: Sheridan, Noblesville

Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one

Toward SR 38: Sheridan, Noblesville
5
93.6 mi into trip | ~2h 16m in

Enter roundabout

Roundabout - know your exit number before entering

5
94.4 mi into trip | ~2h 17m in | SR 32; SR 38 / Westfield Road

Enter roundabout onto SR 32; SR 38 / Westfield Road

Roundabout - know your exit number before entering

7
102.2 mi into trip | ~2h 28m in

Take the exit toward 116th Street

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Exit 205 Toward 116th Street
9
102.4 mi into trip | ~2h 29m in

Keep slight right at fork toward Fishers, Conner Prairie

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Toward Fishers, Conner Prairie

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Pulaski County, IN to Fishers, IN, road signs begin pointing toward Noblesville along the way.

Noblesville

86.2 mi in | ~2h 4m

Main Roads

Road Distance Duration
US 31 31.2 mi 37m
South Huddleston Road 24.9 mi 36m
Logansport Bypass 20.8 mi 30m
IN-37 6.1 mi 8m
SR 14 4.9 mi 8m
Sheridan Avenue 3.5 mi 4m
Westfield Road 2.6 mi 3m
Little Chicago Road 1.8 mi 3m
Longest stretch: US 31 — 31.2 mi, about 37m

Turn-by-Turn Driving Directions

Step-by-step road directions between Pulaski County, IN and Fishers, IN.

1

Start on 500 W

0.9 mi · 3 min · 500 W
2

Turn right onto SR 14

4.9 mi · 8 min · SR 14
3

Turn right onto US 35

1.1 mi · 2 min · North Monticello Street
4

Continue on US 35

25 mi · 36 min · South Huddleston Road
5

Turn left onto US 24; US 35; SR 25

0.3 mi · 31 sec · US 24; US 35; SR 25
6

Take the ramp onto US 24; US 35

0.3 mi · 40 sec · US 24; US 35
7

Merge onto US 24; US 35

1.1 mi · 1 min · Hoosier Heartland Highway
8

Continue on US 24; US 35

21 mi · 30 min · Logansport Bypass
9

Take the ramp onto US 35

0.5 mi · 1 min · US 35
10

Merge onto US 31

30 mi · 36 min · US 31
11

Turn right onto East 226th Street

270 ft · 10 sec · East 226th Street
12

Turn left

320 ft · 50 sec
13

Continue on this road

320 ft · 25 sec · this road
14

Turn right onto East 226th Street

270 ft · 9 sec · East 226th Street
15

Turn right onto US 31

1.1 mi · 1 min · US 31
16

Take the exit

0.3 mi · 51 sec
Toward SR 38: Sheridan, Noblesville
17

Turn left onto SR 38

3.5 mi · 4 min · Sheridan Avenue
18

Turn right onto Little Chicago Road

0.3 mi · 32 sec · Little Chicago Road
19

Enter roundabout onto Little Chicago Road

120 ft · 2 sec · Little Chicago Road
20

Continue on Little Chicago Road

1.5 mi · 2 min · Little Chicago Road
21

Turn left onto SR 32

1.7 mi · 2 min · Westfield Road
22

Enter roundabout

136 ft · 3 sec
23

Continue

309 ft · 5 sec
24

Continue on SR 32

0.6 mi · 53 sec · Westfield Road
25

Enter roundabout onto Westfield Road

106 ft · 1 sec · Westfield Road
26

Continue on Westfield Road

0.2 mi · 13 sec · Westfield Road
27

Enter roundabout onto SR 32; SR 38

111 ft · 1 sec · Westfield Road
28

Continue on SR 32; SR 38

0.1 mi · 13 sec · Westfield Road
29

Continue on SR 32; SR 38

1.5 mi · 2 min · West Conner Street
30

Turn right onto SR 37

6.1 mi · 8 min · IN-37
31

Take the exit

0.2 mi · 33 sec
Exit 205 Toward 116th Street Use the slight right lane.
32

Keep slight right at fork

186 ft · 4 sec
Toward Fishers, Conner Prairie Use the slight right lane.
33

Turn right onto East 116th Street

0.2 mi · 36 sec · East 116th Street
Use the right lane.
34

Turn left onto Lantern Road

478 ft · 16 sec · Lantern Road
35

Arrive at destination

Lantern Road

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 51.4 miles from Pulaski County, IN, or about 1h 20m into the drive.
The longest continuous stretch on this route runs about 31.2 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 23 miles or 38m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 51.4 miles or 1h 20m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 2h 1m

Traffic, exits, and arrival timing usually matter more near Fishers, IN than in the middle of the route.

Before You Leave

+

Open the route before leaving Pulaski County, IN so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Pulaski County, IN

This is one driving day of about 102.7 miles and 2h 30m.

Your first comfortable stop window is around 23 miles from Pulaski County, IN.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on US 31 for about 31.2 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 51.4 mi from Pulaski County, IN · 1h 20m into the drive

Downtown Kokomo, IN, IN

Mid-route town

Meal stop

Kokomo, IN

51 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Popular next leg

Kokomo, IN to Fishers, IN

43.5 mi · 1h 3m

Pacing Suggestions

Winamac, IN

Fuel and coffee

A short stop after about 23 miles helps settle the day before fatigue starts building.

Kokomo, IN

Meal break

The midpoint is around 51.4 miles from Pulaski County, IN, which is a good place for a longer meal and fuel stop.

Arriving in Fishers, IN

The final approach into Fishers, IN usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Fishers, IN.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$16.06 one way

$32.11 round trip

$3.97/gal 25.4 MPG avg 36 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $17.63 $35.26
premium $4.89 $19.76 $39.53
diesel $5.61 $22.67 $45.35

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$16

Meals

$25–$50

Total

$41–$66

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 35.9 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $11 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 30.8 0 $10.78 $4.93
Efficient EV 25.7 0 $8.99 $4.11
EV Truck/SUV 41.1 0 $14.38 $6.57

Gas CO2

36 kg

EV CO2

12 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 16, 2026

Origin

Pulaski County, IN

Night in Pulaski County on Thursday

Local time

10:06 PM

EDT

Current temp

51°F

Unavailable

Live forecast

Destination

Fishers, IN

Night in Fishers on Thursday

Local time

10:06 PM

EDT

Current temp

54°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

3 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

2h 30m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Pulaski County, IN to Fishers, IN covers 102.7 miles and takes about 2h 30m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are US 31, South Huddleston Road, Logansport Bypass. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 51.4 miles from Pulaski County, IN. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $16.06 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This drive requires moderate attention. Across 102.7 miles you will encounter 25 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: at 86.2 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one; at 93.6 miles: Roundabout - know your exit number before entering; at 94.4 miles (SR 32; SR 38 / Westfield Road): Roundabout - know your exit number before entering.
On the drive from Pulaski County, IN to Fishers, IN, road signs begin pointing toward Noblesville along the way.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Fishers, IN to Pulaski County, IN

Plan the drive back the other way.

101.6 mi 2h 27m

Explore more options from Pulaski County, IN or browse trips ending in Fishers, IN.

Looking for more statewide routes? Browse IN road trips.

Explore maps for Pulaski County, IN or Fishers, IN on MapSof.net.