Trip from Randallstown, MD to Baltimore, MD

Drive Time

28m

Distance

12.1 mi

19 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$2

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 8 min
4 AM
0h 26m ★
6 AM
0h 29m
8 AM
0h 34m
10 AM
0h 31m
12 PM
0h 30m
3 PM
0h 31m
5 PM
0h 34m
8 PM
0h 27m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Randallstown, MD, MD

Randallstown, MD

Los Muertos Crew

Trip Overview

If you are looking for a quick commute or a simple day trip within Maryland, the 12.1-mile journey from Randallstown to Baltimore is highly efficient. You can expect to reach your destination in about 28 minutes, making it a perfect candidate for a single-day excursion. With a fuel budget of just $2, this route is exceptionally cost-effective for your travel plans. Since both cities are located within the Northeast region, you will remain in a familiar environment throughout the transit. This trip is straightforward enough that you will not need to worry about overnight accommodations or complex logistics. It serves as a practical connection between suburban Randallstown and the heart of Baltimore.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

6 miles from Randallstown, MD

A natural place for your longest stop of the day , about 13m into the drive .

Drive Character

Expect a turn-heavy local drive that demands your full attention as you navigate your way into the city. You will spend the majority of your time on surface streets, as the highway portion accounts for only 9 miles of the total distance. The longest uninterrupted stretch you will encounter is a 5-mile segment on Liberty Road, which serves as the backbone of your journey. As you transition from Liberty Road to Liberty Heights Avenue and eventually toward the Jones Falls Expressway, the road personality shifts from a standard local commute to a more urban traffic flow. It is a functional, no-frills drive that prioritizes direct access over scenic cruising.

This route has more turning and local-road decision points than a simple highway run.
There are about 14 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Liberty Road is the longest continuous segment at about 5 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 9.2 miles in near US 1; US 40 Truck / West North Avenue.

Route Complexity 7/10

Demanding - plan breaks and stay ahead of the key maneuvers

This is a demanding drive. With 11 significant decision points across 12.1 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 9.2 miles (US 1; US 40 Truck / West North Avenue): Lane positioning matters here; at 11.5 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 11.7 miles: Highway fork - watch signs carefully.

Critical Maneuvers

5 of 11 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
9.2 mi into trip | ~22m in | US 1; US 40 Truck / West North Avenue

Turn left onto US 1; US 40 Truck / West North Avenue

Lane positioning matters here

Use the none lane.
6
11.5 mi into trip | ~27m in

Take the exit toward Pleasant Street

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the straight / slight left lanes. Toward Pleasant Street
6
11.7 mi into trip | ~27m in

Keep slight right at fork toward Pleasant Street

Highway fork - watch signs carefully

Toward Pleasant Street
7
11.8 mi into trip | ~28m in | Guilford Avenue

Turn left onto Guilford Avenue

Lane positioning matters here

Use the left / straight lanes.
7
12 mi into trip | ~28m in | East Fayette Street

Turn right onto East Fayette Street

Lane positioning matters here

Use the right lane.

Main Roads

Road Distance Duration
Liberty Road 5 mi 11m
Liberty Heights Avenue 3.3 mi 8m
Jones Falls Expressway 1.1 mi 1m
West North Avenue 1 mi 2m
Reisterstown Road 0.4 mi 1m
Pennsylvania Avenue 0.3 mi 1m
Guilford Avenue 0.2 mi <1m
East Fayette Street <0.1 mi <1m
Longest stretch: Liberty Road — 5 mi, about 11m

Turn-by-Turn Driving Directions

Step-by-step road directions between Randallstown, MD and Baltimore, MD.

1

Start on MD 26

5.0 mi · 11 min · Liberty Road
Use the none lane.
2

Continue on MD 26

3.3 mi · 8 min · Liberty Heights Avenue
Use the straight lane.
3

Turn slight right

432 ft · 16 sec
Use the slight right lane.
4

Continue on MD 140

0.4 mi · 1 min · Reisterstown Road
Use the straight / left / right lanes.
5

Turn right onto Pennsylvania Avenue

0.3 mi · 1 min · Pennsylvania Avenue
Use the straight / left / right lanes.
6

Turn left onto US 1; US 40 Truck

1.0 mi · 2 min · West North Avenue
Use the none lane.
7

Take the ramp

0.2 mi · 24 sec
Toward I 83 South
8

Merge onto I 83

1.1 mi · 1 min · Jones Falls Expressway
Use the none lane.
9

Take the exit

0.2 mi · 29 sec
Toward Pleasant Street Use the straight / slight left lanes.
10

Keep slight right at fork

157 ft · 3 sec
Toward Pleasant Street
11

Turn slight right onto East Pleasant Street

144 ft · 12 sec · East Pleasant Street
Use the right lane.
12

Turn left onto Guilford Avenue

0.2 mi · 39 sec · Guilford Avenue
Use the left / straight lanes.
13

Turn right onto East Fayette Street

325 ft · 9 sec · East Fayette Street
Use the right lane.
14

Arrive at destination

East Fayette Street

Trip Plan

Because this is a short, 28-minute drive, you have significant flexibility regarding your departure time, though you should account for typical urban traffic patterns on the Jones Falls Expressway. You will not need to plan for any stops given the brief duration of the trip, allowing you to complete the journey in one go. Keep your $2 fuel budget in mind as you head out, and ensure your vehicle is ready for frequent turns rather than long-distance highway cruising. A concrete tip for this specific route is to stay alert during the transition between Liberty Road and the expressway, as the shift in road type can catch drivers off guard. Use this efficiency to your advantage by planning your city arrival for a time that avoids peak rush hour congestion.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 6 miles from Randallstown, MD, or about 13m into the drive.
The longest continuous stretch on this route runs about 5 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 12.1 miles or 28m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 6 miles or 13m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 25m

Traffic, exits, and arrival timing usually matter more near Baltimore, MD than in the middle of the route.

Before You Leave

+

Open the route before leaving Randallstown, MD so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Randallstown, MD

This is one driving day of about 12.1 miles and 28m.

Your first comfortable stop window is around 80 miles from Randallstown, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Liberty Road for about 5 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 6 mi from Randallstown, MD · 13m into the drive

Mid-route town

Meal stop

Staten Island, NY

6 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Staten Island, NY

Fuel and coffee

A short stop after about 12.1 miles helps settle the day before fatigue starts building.

Staten Island, NY

Meal break

The midpoint is around 6 miles from Randallstown, MD, which is a good place for a longer meal and fuel stop.

Arriving in Baltimore, MD

The final approach into Baltimore, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Baltimore, MD.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$2.00 one way

$4.00 round trip

$4.20/gal 25.4 MPG avg 4 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.60 $2.19 $4.38
premium $4.92 $2.34 $4.69
diesel $5.64 $2.69 $5.38

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$2

Meals

$25–$50

Total

$27–$52

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 4.2 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $1 in charging · 0 stops · 75% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 3.6 0 $1.27 $0.58
Efficient EV 3 0 $1.06 $0.48
EV Truck/SUV 4.8 0 $1.69 $0.77

Gas CO2

4 kg

EV CO2

1 kg (75% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 14 hours ago

Origin

Randallstown, MD

Night in Randallstown on Sunday

Local time

10:31 PM

EDT

Current temp

85°F

Unavailable

Live forecast

Destination

Baltimore, MD

Night in Baltimore on Sunday

Local time

10:31 PM

EDT

Current temp

85°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

Very similar conditions

Both ends of the route are sitting at about the same temperature right now.

Road read

28m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Randallstown, MD to Baltimore, MD covers 12.1 miles and takes about 28m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Liberty Road, Liberty Heights Avenue, Jones Falls Expressway. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 6 miles from Randallstown, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $2.00 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 11 significant decision points across 12.1 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 9.2 miles (US 1; US 40 Truck / West North Avenue): Lane positioning matters here; at 11.5 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 11.7 miles: Highway fork - watch signs carefully.
The route from Randallstown, MD to Baltimore, MD does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Randallstown, MD or browse trips ending in Baltimore, MD.

Looking for more statewide routes? Browse MD road trips.

Explore maps for Randallstown, MD or Baltimore, MD on MapSof.net.