Trip from Riverton, UT to East Millcreek, UT

Drive Time

27m

Distance

20.7 mi

33 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$3

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 7 min

4 AM

0h 25m ★

6 AM

0h 28m

8 AM

0h 32m

10 AM

0h 29m

12 PM

0h 29m

3 PM

0h 30m

5 PM

0h 32m

8 PM

0h 26m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Best Time Drive vs Fly

Google Maps Waze Apple Maps

Download GPX

Trip Overview

The drive from Riverton, UT to East Millcreek, UT covers 20.7 miles and takes about 27m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Belt Route, Veterans Memorial Highway, 12600 South for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 7.9 miles on Belt Route. At current regular gas prices, budget about $3.28 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

10.3 miles from Riverton, UT

A natural place for your longest stop of the day , about 14m into the drive .

Drive Character

Expect a 27m drive with frequent turns across 20.7 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.

There are about 15 navigation steps in the underlying route data, so the final approach matters more than the middle miles.

Belt Route is the longest continuous segment at about 7.9 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.1 miles in near SR 71 / 12600 South.

Route Complexity 9/10

High effort - long or complex enough to need steady focus all day

This is a demanding drive. With 10 significant decision points across 20.7 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 0.1 miles (SR 71 / 12600 South): Sharp turn - reduce speed on approach. Lane positioning matters here; at 6.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 9 miles: Highway fork - watch signs carefully. Lane positioning matters here.

Critical Maneuvers

5 of 10 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

9

0.1 mi into trip | ~0m in | SR 71 / 12600 South

Turn uturn onto SR 71 / 12600 South

Sharp turn - reduce speed on approach. Lane positioning matters here

Use the none lane.

8

6.4 mi into trip | ~9m in

Take the exit toward SR 48, I 215: 7200 South, Belt Route

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 294A-C Toward SR 48, I 215: 7200 South, Belt Route

7

9 mi into trip | ~12m in

Keep slight left at fork toward I 215

Highway fork - watch signs carefully. Lane positioning matters here

Use the none lane. Toward I 215

8

10 mi into trip | ~13m in

Keep slight right at fork toward I 215 East

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight left / slight right lanes. Exit 294B Toward I 215 East

7

18.4 mi into trip | ~22m in

Take the exit toward 3900 South, 3300 South

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the left lane. Toward 3900 South, 3300 South

Towns Along This Route

Between Riverton, UT and East Millcreek, UT, road signs point toward Salt Lake City and Belt Route.

Salt Lake City

3.2 mi in | ~5m | via I 15

Belt Route

6.4 mi in | ~9m

Main Roads

Road	Distance	Duration
Belt Route	7.9 mi	8m
Veterans Memorial Highway	3.2 mi	3m
12600 South	1.6 mi	2m
Wasatch Boulevard	1.1 mi	2m
12300 South	1.1 mi	2m
3300 South	0.8 mi	1m

Longest stretch: Belt Route — 7.9 mi, about 8m

Turn-by-Turn Driving Directions

Step-by-step road directions between Riverton, UT and East Millcreek, UT.

1

Start on this road

187 ft · 15 sec · this road

2

Turn right

192 ft · 15 sec

3

Turn uturn onto SR 71

1.6 mi · 2 min · 12600 South

Use the none lane.

4

Continue on SR 71

1.1 mi · 2 min · 12300 South

Use the none lane.

5

Take the ramp

0.5 mi · 37 sec

Use the left lane.

6

Merge onto I 15

3.2 mi · 3 min · Veterans Memorial Highway

Toward Salt Lake City Use the none / straight / slight right lanes.

7

Take the exit

2.6 mi · 2 min

Exit 294A-C Toward SR 48, I 215: 7200 South, Belt Route Use the straight / slight right lanes.

8

Keep slight left at fork

0.3 mi · 24 sec

Toward I 215 Use the none lane.

9

Continue on this road

0.7 mi · 1 min · this road

Exit 298 Toward I 215

10

Keep slight right at fork

0.5 mi · 55 sec

Exit 294B Toward I 215 East Use the slight left / slight right lanes.

11

Merge onto I 215

7.9 mi · 8 min · Belt Route

Use the none / straight / slight right lanes.

12

Take the exit

0.3 mi · 43 sec

Toward 3900 South, 3300 South Use the left lane.

13

Continue on Wasatch Boulevard

1.1 mi · 2 min · Wasatch Boulevard

Use the none lane.

14

Turn left onto SR 171

0.8 mi · 1 min · 3300 South

Use the left lane.

15

Arrive at destination

SR 171

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.

You may only need one short stretch break if traffic stays light.

The halfway point lands around 10.3 miles from Riverton, UT, or about 14m into the drive.

The longest continuous stretch on this route runs about 7.9 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 20.7 miles or 27m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 10.3 miles or 14m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 22m

Traffic, exits, and arrival timing usually matter more near East Millcreek, UT than in the middle of the route.

Before You Leave

+

Open the route before leaving Riverton, UT so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Riverton, UT

This is one driving day of about 20.7 miles and 27m.

Your first comfortable stop window is around 80 miles from Riverton, UT.

This route can stay practical as a one-day drive if traffic stays reasonable.

You may only need one short stretch stop if conditions stay smooth.

The longest stretch is on Belt Route for about 7.9 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 10.3 mi from Riverton, UT · 14m into the drive

Mid-route town

Meal stop

Sandy, UT

10 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Millcreek, UT

Fuel and coffee

A short stop after about 20.7 miles helps settle the day before fatigue starts building.

Murray, UT

Meal break

The midpoint is around 10.3 miles from Riverton, UT, which is a good place for a longer meal and fuel stop.

Arriving in East Millcreek, UT

The final approach into East Millcreek, UT usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around East Millcreek, UT.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$3.28 one way

$6.56 round trip

$4.03/gal 25.4 MPG avg 7 kg CO₂

Fuel Type	$/gal	One Way	Round Trip
midgrade	$4.23	$3.45	$6.90
premium	$4.53	$3.69	$7.38
diesel	$5.64	$4.60	$9.20

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$3

Meals

$25–$50

Total

$28–$53

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 7.2 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $2 in charging · 0 stops · 71% less CO₂

Vehicle Type	kWh	DC Fast	Home Charge
Average EV	6.2	$2.17	$0.99
Efficient EV	5.2	$1.81	$0.83
EV Truck/SUV	8.3	$2.90	$1.32

Gas CO2

7 kg

EV CO2

2 kg (71% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Riverton, UT

Afternoon in Riverton on Sunday

Local time

4:19 PM

MDT

Current temp

43°F

Unavailable

Live forecast

Destination

East Millcreek, UT

Afternoon in East Millcreek on Sunday

Local time

4:19 PM

MDT

Current temp

39°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

4 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

27m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Riverton, UT to East Millcreek, UT covers 20.7 miles and takes about 27m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Belt Route, Veterans Memorial Highway, 12600 South. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 10.3 miles from Riverton, UT. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $3.28 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

This is a demanding drive. With 10 significant decision points across 20.7 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

The main spots that need attention: at 0.1 miles (SR 71 / 12600 South): Sharp turn - reduce speed on approach. Lane positioning matters here; at 6.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 9 miles: Highway fork - watch signs carefully. Lane positioning matters here.

Between Riverton, UT and East Millcreek, UT, road signs point toward Salt Lake City and Belt Route.