Skip to main content

Trip from Rushford, MN to Bloomington, MN

Compiled by the Trip.ovh editorial team · Last recalculated Apr 17, 2026 · Methodology

Drive Time

2h 36m

Distance

130.3 mi

210 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$19

one way

EV Charging

Unknown

Best Time to Leave

Save up to 32 min
4 AM
2h 26m ★
6 AM
2h 37m
8 AM
2h 58m
10 AM
2h 44m
12 PM
2h 42m
3 PM
2h 45m
5 PM
2h 57m
8 PM
2h 30m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Rushford, MN, MN

Rushford, MN

Tom Fisk

Downtown Bloomington, MN, MN

Bloomington, MN

Wikimedia Commons

Trip Overview

This 130.3-mile drive from Rushford, MN, to Bloomington, MN, is a manageable one-day trip, taking about 2 hours and 36 minutes. You'll spend most of your time on highways, with an estimated fuel cost of $19. The majority of this journey unfolds within the Midwest region, staying within Minnesota the entire time. This route is well-suited for a single day of travel, allowing for a relaxed pace and plenty of flexibility. It's a straightforward drive perfect for those looking to get from point A to B efficiently.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

1 planned break

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

65.2 miles from Rushford, MN

A natural place for your longest stop of the day , about 1h 16m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 2h 36m. Total distance: 130.3 miles.

Family Friendly

Moderate complexity with 1 natural rest stops along the way.

Solo Traveler

2h 36m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (81%). Some complex stretches to watch for.

Drive Character

Expect a highway-focused drive for this trip, with 81% of the route utilizing major roadways. The longest uninterrupted stretch you'll encounter is 66.9 miles on US 52, offering a substantial period of steady cruising. While primarily highway, the route incorporates local roads like South Mill Street, offering brief glimpses of different environments. This blend means you'll experience both efficient travel on faster roads and the character of smaller towns as you transition.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 23 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
US 52 is the longest continuous segment at about 66.9 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on US 52 and I 90. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 10 miles in.

Driving Effort 9/10

High effort - long or complex enough to need steady focus all day

Balances navigation complexity with total wheel time.

This is a demanding drive. With 14 significant decision points across 130.3 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 10 miles: Navigation decision point; at 121.5 miles: Highway fork - watch signs carefully; at 123 miles (I 35W): Highway fork - watch signs carefully. Lane positioning matters here.

Critical Maneuvers

5 of 14 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
10 mi into trip | ~13m in

Take the ramp toward I 90 West: Austin

Navigation decision point

Toward I 90 West: Austin
6
121.5 mi into trip | ~2h 25m in

Keep slight left at fork toward I 35 North

Highway fork - watch signs carefully

Toward I 35 North
6
123 mi into trip | ~2h 27m in | I 35W

Keep slight left at fork onto I 35W

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight left / slight right lanes.
7
130.1 mi into trip | ~2h 36m in

Take the exit toward 90th Street

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Exit 7B Toward 90th Street
7
130.3 mi into trip | ~2h 36m in | West 90th Street

Turn left onto West 90th Street

Lane positioning matters here

Use the left / straight lanes.

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Rushford, MN to Bloomington, MN, road signs begin pointing toward Cr 46 along the way.

Cr 46

108.5 mi in | ~2h 6m

Main Roads

Road Distance Duration
US 52 66.9 mi 1h 17m
I 90 30.9 mi 33m
South Mill Street 9.9 mi 13m
160th Street East 9.5 mi 13m
I 35W 7.1 mi 8m
Brandel Drive 1.4 mi 2m
I 35 1.2 mi 1m
162nd Street West 1 mi 1m
Longest stretch: US 52 — 66.9 mi, about 1h 17m

Turn-by-Turn Driving Directions

Step-by-step road directions between Rushford, MN and Bloomington, MN.

1

Start on East Jessie Street

74 ft · 7 sec · East Jessie Street
2

Turn right onto MN 43

9.9 mi · 13 min · South Mill Street
3

Take the ramp

0.3 mi · 35 sec
Toward I 90 West: Austin
4

Merge onto I 90

31 mi · 33 min · I 90
5

Take the exit

0.3 mi · 41 sec
Exit 218 Toward US 52: Rochester
6

Keep slight right at fork

0.1 mi · 14 sec
Toward US 52 North: Rochester
7

Merge onto US 52

9.7 mi · 11 min · US 52
8

Continue on US 52; US 63

17 mi · 19 min · US 52; US 63
9

Continue on US 52

9.1 mi · 10 min · US 52
Use the straight lane.
10

Continue on US 52

32 mi · 36 min · US 52
Use the straight lane.
11

Take the exit

0.4 mi · 57 sec
Toward CR 46
12

Turn left onto CR 46

1.4 mi · 2 min · Brandel Drive
Use the left lane.
13

Continue on CR 46

9.5 mi · 13 min · 160th Street East
Use the left lane.
14

Continue on CR 46

0.6 mi · 55 sec · Isleton Way
15

Continue on CR 46

1.0 mi · 1 min · 162nd Street West
Use the left lane.
16

Take the ramp

405 ft · 9 sec
Toward I 35 North
17

Keep slight left at fork

0.3 mi · 39 sec
Toward I 35 North
18

Merge onto I 35

1.2 mi · 1 min · I 35
Use the straight / slight right lanes.
19

Keep slight left at fork onto I 35W

7.1 mi · 8 min · I 35W
Use the slight left / slight right lanes.
20

Take the exit

0.2 mi · 21 sec
Exit 7B Toward 90th Street Use the slight right lane.
21

Turn straight onto East Bloomington Freeway

193 ft · 10 sec · East Bloomington Freeway
22

Turn left onto West 90th Street

163 ft · 4 sec · West 90th Street
Use the left / straight lanes.
23

Arrive at destination

West 90th Street

Trip Plan

Given the 2 hour and 36-minute duration, starting your journey in Rushford in the morning will get you to Bloomington with ample time to spare. With only one recommended stop, you have the flexibility to decide when and where to take a break based on your needs. Keep an eye on your fuel levels, as the longest stretch on US 52 is nearly 67 miles. Planning your departure to avoid peak traffic around Bloomington could make your arrival smoother.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 65.2 miles from Rushford, MN, or about 1h 16m into the drive.
The longest continuous stretch on this route runs about 66.9 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 29 miles or 34m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 65.2 miles or 1h 16m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 2h 4m

Traffic, exits, and arrival timing usually matter more near Bloomington, MN than in the middle of the route.

Before You Leave

+

Open the route before leaving Rushford, MN so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Rushford, MN

This is one driving day of about 130.3 miles and 2h 36m.

Your first comfortable stop window is around 29 miles from Rushford, MN.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on US 52 for about 66.9 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 65.2 mi from Rushford, MN · 1h 16m into the drive

Downtown Vermillion, MN, MN

Mid-route town

Meal stop

Vermillion, MN

65 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Lanesboro, MN

Fuel and coffee

A short stop after about 29 miles helps settle the day before fatigue starts building.

Rochester, MN

Meal break

The midpoint is around 65.2 miles from Rushford, MN, which is a good place for a longer meal and fuel stop.

Before the longest stretch

Fuel check

Top up before US 52 if your tank is already low. That segment runs about 66.9 miles.

Arriving in Bloomington, MN

The final approach into Bloomington, MN usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Bloomington, MN.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$19.39 one way

$38.78 round trip

$3.78/gal 25.4 MPG avg 46 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.07 $20.89 $41.79
premium $4.53 $23.25 $46.50
diesel $5.61 $28.77 $57.54

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$19

Meals

$25–$50

Total

$44–$69

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 45.6 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $14 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 39.1 0 $13.68 $6.25
Efficient EV 32.6 0 $11.40 $5.21
EV Truck/SUV 52.1 0 $18.24 $8.34

Gas CO2

46 kg

EV CO2

15 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Rushford, MN

Late night in Rushford on Friday

Local time

12:31 AM

CDT

Current temp

69°F

Unavailable

Live forecast

Destination

Bloomington, MN

Late night in Bloomington on Friday

Local time

12:31 AM

CDT

Current temp

48°F

Unavailable

Live forecast

44°F

Vermillion, MN

65 mi in

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

21 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

2h 36m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Rushford, MN to Bloomington, MN covers 130.3 miles and takes about 2h 36m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are US 52, I 90, South Mill Street. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 65.2 miles from Rushford, MN. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $19.39 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a demanding drive. With 14 significant decision points across 130.3 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 10 miles: Navigation decision point; at 121.5 miles: Highway fork - watch signs carefully; at 123 miles (I 35W): Highway fork - watch signs carefully. Lane positioning matters here.
On the drive from Rushford, MN to Bloomington, MN, road signs begin pointing toward Cr 46 along the way.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Rushford, MN or browse trips ending in Bloomington, MN.

Looking for more statewide routes? Browse MN road trips.