Skip to main content

Trip from SeaTac, WA to Yakima, WA

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 18, 2026 · Editorial standards

Drive Time

2h 50m

Distance

147.7 mi

238 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$31

one way

EV Charging

Unknown

Best Time to Leave

Save up to 33 min
4 AM
2h 39m ★
6 AM
2h 50m
8 AM
3h 12m
10 AM
2h 58m
12 PM
2h 56m
3 PM
2h 59m
5 PM
3h 11m
8 PM
2h 44m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

city in King County, Washington State, United States

SeaTac, WA

Wikimedia Commons

Trip Overview

Spanning 147.7 miles, the drive from SeaTac to Yakima is a straightforward journey that typically takes about 2 hours and 50 minutes. Because the route is compact and efficient, it works perfectly as a single-day trip, meaning you don't need to budget for an overnight stay. Expect to spend roughly $31 on fuel for the trip, which relies heavily on a major highway-focused corridor. You will navigate primarily via I-405, I-90, and US-97 to connect the two Washington locations. While both ends of the trip sit within the Pacific Coast region, you will experience a distinct transition in terrain as you move toward the interior. It is a practical, no-nonsense route that is ideal for travelers looking to reach their destination without unnecessary detours.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

1 planned break

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

73.8 miles from SeaTac, WA

A natural place for your longest stop of the day , about 1h 26m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 2h 50m. Total distance: 147.7 miles.

Family Friendly

Moderate complexity with 1 natural rest stops along the way.

Solo Traveler

2h 50m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (97%). Some complex stretches to watch for.

Drive Character

This route is defined by its efficiency, with 97% of the journey consisting of highway driving. You will spend the vast majority of your time on I-90, which features a long, uninterrupted stretch of 100.5 miles that allows for steady cruising. As you transition from the busy urban corridors around SeaTac onto the main highway, the pace remains consistent and fast-moving. Eventually, you will shift onto US-97 to complete the final leg of the drive. The experience behind the wheel is predictable and well-maintained, prioritizing speed and connectivity over winding local roads.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 18 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 90 is the longest continuous segment at about 100.5 miles.

Elevation Profile

Hilly terrain with moderate elevation changes

2,534 ft 61 ft

Total Climb

3,394 ft

Total Descent

2,760 ft

Highest Point

2,534 ft

~63.3 mi in

Elevation Range

2,473 ft

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 90 and US 97. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.2 miles in near South 170th Street.

Driving Effort 9/10

High effort - long or complex enough to need steady focus all day

Balances navigation complexity with total wheel time.

This is a demanding drive. With 13 significant decision points across 147.7 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 0.2 miles (South 170th Street): Complex interchange - multiple decisions in a short stretch; at 2.5 miles (WA 518): Highway fork - watch signs carefully. Lane positioning matters here; at 13.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 13 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

6
0.2 mi into trip | ~1m in | South 170th Street

At end of road, turn left onto South 170th Street

Complex interchange - multiple decisions in a short stretch

7
2.5 mi into trip | ~5m in | WA 518

Keep slight left at fork onto WA 518 toward I 405 North: Renton

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight left lane. Toward I 405 North: Renton
8
13.3 mi into trip | ~18m in

Take the exit toward I 90: Seattle, Spokane

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Exit 11 Toward I 90: Seattle, Spokane
7
13.5 mi into trip | ~19m in

Keep slight right at fork toward I 90 East: Spokane

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight right lane. Toward I 90 East: Spokane
7
114.4 mi into trip | ~2h 11m in | US 97

Take the exit onto US 97 toward I 82 East, US 97 South: Yakima

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Toward I 82 East, US 97 South: Yakima

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from SeaTac, WA to Yakima, WA, road signs begin pointing toward Spokane along the way.

Spokane

13.3 mi in | ~18m

Main Roads

Road Distance Duration
I 90 100.5 mi 1h 51m
US 97 31.3 mi 34m
I 405 10.5 mi 13m
North 1st Street 1.6 mi 3m
WA 518 1.2 mi 1m
International Boulevard 0.9 mi 1m
South 170th Street 0.2 mi <1m
32nd Avenue South 0.2 mi <1m
Longest stretch: I 90 — 100.5 mi, about 1h 51m

Turn-by-Turn Driving Directions

Step-by-step road directions between SeaTac, WA and Yakima, WA.

1

Start on this road

140 ft · 15 sec · this road
2

Turn left

52 ft · 9 sec
3

Turn left onto 32nd Avenue South

0.2 mi · 39 sec · 32nd Avenue South
4

At end of road, turn left onto South 170th Street

0.2 mi · 33 sec · South 170th Street
5

Turn right onto WA 99

0.9 mi · 1 min · International Boulevard
Use the right lane.
6

Take the ramp

0.4 mi · 49 sec
Toward WA 518 East Use the right lane.
7

Merge onto WA 518

0.9 mi · 1 min · WA 518
Use the straight / slight right lanes.
8

Keep slight left at fork onto WA 518

0.3 mi · 22 sec · WA 518
Toward I 405 North: Renton Use the slight left lane.
9

Continue on I 405

10 mi · 13 min · I 405
Use the straight / slight right lanes.
10

Take the exit

0.2 mi · 31 sec
Exit 11 Toward I 90: Seattle, Spokane Use the slight right lane.
11

Keep slight right at fork

0.4 mi · 45 sec
Toward I 90 East: Spokane Use the slight right lane.
12

Merge onto I 90

101 mi · 1 hr 51 min · I 90
Use the straight / slight right lanes.
13

Take the exit onto US 97

31 mi · 34 min · US 97
Toward I 82 East, US 97 South: Yakima Use the straight / slight right lanes.
14

Take the exit

314 ft · 4 sec
Toward US 12 west, North 1st Street
15

Keep slight left at fork

0.2 mi · 26 sec
16

Continue on WA 823

0.1 mi · 13 sec · Selah Road
17

Continue on North 1st Street

1.6 mi · 3 min · North 1st Street
18

Arrive at destination

South 1st Street

Trip Plan

To make the most of this drive, plan for a single stop to break up the 2-hour and 50-minute travel time. Since the trip is relatively short, you have plenty of flexibility to adjust your departure to avoid peak traffic hours near the SeaTac area. Keep a close eye on your fuel gauge, especially before hitting the longer 100.5-mile stretch on I-90, where service availability may vary. A concrete tip for this route is to ensure your vehicle is prepared for the shift in road types when you transition from the interstate system to US-97. By pacing yourself and staying mindful of the highway-heavy nature of the trip, you can easily manage the entire distance in a single, comfortable stint.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 73.8 miles from SeaTac, WA, or about 1h 26m into the drive.
The longest continuous stretch on this route runs about 100.5 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 32 miles or 40m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 73.8 miles or 1h 26m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 2h 19m

Traffic, exits, and arrival timing usually matter more near Yakima, WA than in the middle of the route.

Before You Leave

+

Open the route before leaving SeaTac, WA so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from SeaTac, WA

This is one driving day of about 147.7 miles and 2h 50m.

Your first comfortable stop window is around 32 miles from SeaTac, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on I 90 for about 100.5 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 73.8 mi from SeaTac, WA · 1h 26m into the drive

Downtown Tanner, WA, WA

Mid-route town

Meal stop

Tanner, WA

74 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Redmond, WA

Fuel and coffee

A short stop after about 32 miles helps settle the day before fatigue starts building.

Tanner, WA

Meal break

The midpoint is around 73.8 miles from SeaTac, WA, which is a good place for a longer meal and fuel stop.

Before the longest stretch

Fuel check

Top up before I 90 if your tank is already low. That segment runs about 100.5 miles.

Arriving in Yakima, WA

The final approach into Yakima, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Yakima, WA.

After long uninterrupted mileage, take five minutes before the last urban segment to reset and refocus on exits, merges, and city traffic.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

National Parks Near This Route

Worth a detour if your schedule allows.

Klondike Gold Rush - Seattle Unit National Historical Park

Klondike Gold Rush - Seattle Unit National Historical Park

National Historical Park

Seattle flourished during and after the Klondike Gold Rush. Merchants supplied people from around the world passing through this port city on their way to a remarkable adventure in the Yukon Territory...

8 mi from route ~19 min detour Free near mile 10.2
View on nps.gov

Park data from the National Park Service API. Alerts update every 2 hours.

Fuel & Cost

Regular Gas

$30.91 one way

$61.82 round trip

$5.32/gal 25.4 MPG avg 52 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $5.58 $32.42 $64.84
premium $5.77 $33.54 $67.08
diesel $5.61 $32.61 $65.22

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$31

Meals

$25–$50

Total

$56–$81

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 51.7 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $16 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 44.3 0 $15.51 $7.09
Efficient EV 36.9 0 $12.92 $5.91
EV Truck/SUV 59.1 0 $20.68 $9.45

Gas CO2

52 kg

EV CO2

17 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

SeaTac, WA

Evening in SeaTac on Friday

Local time

6:27 PM

PDT

Current temp

60°F

Unavailable

Live forecast

Destination

Yakima, WA

Evening in Yakima on Friday

Local time

6:27 PM

PDT

Current temp

46°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

14 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

2h 50m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from SeaTac, WA to Yakima, WA covers 147.7 miles and takes about 2h 50m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are I 90, US 97, I 405. Most of the drive stays on highways, so watch for ramps and exits.

This is a comfortable same-day trip.

The midpoint is about 73.8 miles from SeaTac, WA. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $30.91 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.

This is a demanding drive. With 13 significant decision points across 147.7 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

The main spots that need attention: at 0.2 miles (South 170th Street): Complex interchange - multiple decisions in a short stretch; at 2.5 miles (WA 518): Highway fork - watch signs carefully. Lane positioning matters here; at 13.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.

On the drive from SeaTac, WA to Yakima, WA, road signs begin pointing toward Spokane along the way.

Hilly terrain with moderate elevation changes. The route ranges from 61 ft to 2,534 ft elevation with about 3,394 ft of total climbing.

Yes. Nearby national parks include Klondike Gold Rush - Seattle Unit National Historical Park.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, EIA for fuel prices, USGS 3DEP for elevation, and NPS for national parks. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from SeaTac, WA or browse trips ending in Yakima, WA.

Looking for more statewide routes? Browse WA road trips.