Skip to main content

Trip from Gary, IN to Pulaski County, IN

Last recalculated Apr 17, 2026

Drive Time

1h 44m

Distance

74 mi

119 km

Drive Score

9/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$12

one way

EV Charging

Unknown

Best Time to Leave

Save up to 23 min
4 AM
1h 37m ★
6 AM
1h 45m
8 AM
2h 0m
10 AM
1h 50m
12 PM
1h 48m
3 PM
1h 51m
5 PM
1h 59m
8 PM
1h 40m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

city in Lake County, State of Indiana, United States

Gary, IN

Wikimedia Commons

Downtown Pulaski County, IN, IN

Pulaski County, IN

Provisionshots LLC

Trip Overview

The drive from Gary, IN to Pulaski County, IN covers 74 miles and takes about 1h 44m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Casimir Pulaski Memorial Highway, SR 14, County Road 550 for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 28.3 miles on Casimir Pulaski Memorial Highway. At current regular gas prices, budget about $11.57 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Midpoint

37 miles from Gary, IN

A natural place for your longest stop of the day , about 47m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 1h 44m. Total distance: 74 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

1h 44m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (32%). Straightforward navigation.

Scenic Drive

Mixed drive route profile.

Drive Character

The drive from Gary, IN to Pulaski County, IN covers 74 miles and takes about 1h 44m, using a mix of highways and local roads.

Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Casimir Pulaski Memorial Highway is the longest continuous segment at about 28.3 miles.

How Hard Is This Drive?

This route mixes highway mileage with some local-road sections near the start or finish. There are only a few real navigation decisions along the way. The trickiest moment comes early in the drive near Harrison Street.

Driving Effort 3/10

Easy - simple navigation with a manageable amount of wheel time

Balances navigation complexity with total wheel time.

This is a straightforward 1h 44m drive. You will face about 15 decision points, but nothing that requires special attention if you follow navigation.

Where does it get tricky?

The main spots that need attention: near the start (Harrison Street): Navigation decision point; at 0.1 miles (West 11th Avenue): Navigation decision point; at 0.3 miles (Madison Street): Navigation decision point.

Critical Maneuvers

5 of 15 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
0 mi into trip | ~0m in | Harrison Street

Turn right onto Harrison Street

Navigation decision point

5
0.1 mi into trip | ~0m in | West 11th Avenue

Turn left onto West 11th Avenue

Navigation decision point

4
0.3 mi into trip | ~1m in | Madison Street

Turn right onto Madison Street

Navigation decision point

5
4.8 mi into trip | ~10m in | I 65 / Casimir Pulaski Memorial Highway

Merge onto I 65 / Casimir Pulaski Memorial Highway

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
8
33 mi into trip | ~41m in

Take the exit toward SR 10: Demotte, Roselawn

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Exit 230 Toward SR 10: Demotte, Roselawn

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Gary, IN to Pulaski County, IN, road signs begin pointing toward Roselawn along the way.

Roselawn

33 mi in | ~41m

Main Roads

Road Distance Duration
Casimir Pulaski Memorial Highway 28.3 mi 31m
SR 14 23.6 mi 36m
County Road 550 7.1 mi 9m
West State Road 10 3.5 mi 5m
West State Road 110 2.5 mi 3m
Martin Luther King Drive 2.5 mi 4m
County Road 1500 West 2 mi 2m
Madison Street 1.3 mi 2m
Longest stretch: Casimir Pulaski Memorial Highway — 28.3 mi, about 31m

Turn-by-Turn Driving Directions

Step-by-step road directions between Gary, IN and Pulaski County, IN.

1

Start on 10th Place

55 ft · 4 sec · 10th Place
2

Turn right onto Harrison Street

480 ft · 28 sec · Harrison Street
3

Turn left onto West 11th Avenue

0.2 mi · 39 sec · West 11th Avenue
4

Turn right onto Madison Street

0.3 mi · 47 sec · Madison Street
5

Turn left onto West 15th Avenue

1.0 mi · 1 min · West 15th Avenue
6

Continue on Central Avenue

0.2 mi · 21 sec · Central Avenue
7

Turn right onto Martin Luther King Drive

2.5 mi · 4 min · Martin Luther King Drive
8

Turn left onto US 6 Business

0.2 mi · 34 sec · East Ridge Road
9

Take the ramp

0.3 mi · 35 sec
10

Merge onto I 65

28 mi · 31 min · Casimir Pulaski Memorial Highway
Use the straight / slight right lanes.
11

Take the exit

0.2 mi · 37 sec
Exit 230 Toward SR 10: Demotte, Roselawn Use the slight right lane.
12

Turn left onto SR 10

3.5 mi · 5 min · West State Road 10
13

Continue on SR 110

2.5 mi · 3 min · West State Road 110
14

Turn right onto US 231

1.0 mi · 1 min · Madison Street
15

Continue on US 231

7.1 mi · 9 min · County Road 550
16

Turn left onto SR 14

14 mi · 18 min · SR 14
17

Turn left onto US 421; SR 14

2.0 mi · 2 min · County Road 1500 West
18

Turn right onto SR 14

10 mi · 17 min · SR 14
19

Turn right onto 500 W

0.9 mi · 3 min · 500 W
20

Arrive at destination

500 W

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 37 miles from Gary, IN, or about 47m into the drive.
The longest continuous stretch on this route runs about 28.3 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 16 miles or 22m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 37 miles or 47m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 23m

Traffic, exits, and arrival timing usually matter more near Pulaski County, IN than in the middle of the route.

Before You Leave

+

Open the route before leaving Gary, IN so your first major turns are already loaded.

Day 1

Settle into the route from Gary, IN

This is one driving day of about 74 miles and 1h 44m.

Your first comfortable stop window is around 16 miles from Gary, IN.
This route can stay practical as a one-day drive if traffic stays reasonable.
The longest stretch is on Casimir Pulaski Memorial Highway for about 28.3 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 37 mi from Gary, IN · 47m into the drive

Downtown Roselawn, IN, IN

Mid-route town

Meal stop

Roselawn, IN

37 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Hobart, IN

Fuel and coffee

A short stop after about 16 miles helps settle the day before fatigue starts building.

Roselawn, IN

Meal break

The midpoint is around 37 miles from Gary, IN, which is a good place for a longer meal and fuel stop.

Arriving in Pulaski County, IN

The final approach into Pulaski County, IN usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$11.57 one way

$23.14 round trip

$3.97/gal 25.4 MPG avg 26 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $12.70 $25.40
premium $4.89 $14.24 $28.48
diesel $5.61 $16.34 $32.68

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$12

Meals

$25–$50

Total

$37–$62

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 25.9 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $8 in charging · 0 stops · 65% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 22.2 0 $7.77 $3.55
Efficient EV 18.5 0 $6.48 $2.96
EV Truck/SUV 29.6 0 $10.36 $4.74

Gas CO2

26 kg

EV CO2

9 kg (65% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Gary, IN

Night in Gary on Thursday

Local time

10:05 PM

CDT

Current temp

64°F

Unavailable

Live forecast

Destination

Pulaski County, IN

Night in Pulaski County on Thursday

Local time

11:05 PM

EDT

Current temp

51°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

1 hour later

The destination clock does not match departure time, so double-check hotel check-in windows and late arrival plans.

Temperature spread

13 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 44m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Gary, IN to Pulaski County, IN covers 74 miles and takes about 1h 44m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Casimir Pulaski Memorial Highway, SR 14, County Road 550. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 37 miles from Gary, IN. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $11.57 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a straightforward 1h 44m drive. You will face about 15 decision points, but nothing that requires special attention if you follow navigation.
The main spots that need attention: near the start (Harrison Street): Navigation decision point; at 0.1 miles (West 11th Avenue): Navigation decision point; at 0.3 miles (Madison Street): Navigation decision point.
On the drive from Gary, IN to Pulaski County, IN, road signs begin pointing toward Roselawn along the way.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Gary, IN or browse trips ending in Pulaski County, IN.

Looking for more statewide routes? Browse IN road trips.

Explore maps for Gary, IN or Pulaski County, IN on MapSof.net.