Skip to main content

Trip from Gwynn Oak, MD to Clinton, MD

Last recalculated Apr 16, 2026

Drive Time

1h 15m

Distance

50.5 mi

81 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$8

one way

EV Charging

Unknown

Best Time to Leave

Save up to 17 min
4 AM
1h 10m ★
6 AM
1h 15m
8 AM
1h 27m
10 AM
1h 20m
12 PM
1h 18m
3 PM
1h 20m
5 PM
1h 27m
8 PM
1h 12m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Gwynn Oak, MD, MD

Gwynn Oak, MD

Iqbal farooz

census-designated place in Prince George's County, Maryland, United States

Clinton, MD

Wikimedia Commons

Trip Overview

The drive from Gwynn Oak, MD to Clinton, MD covers 50.5 miles and takes about 1h 15m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on I 95, Ingleside Avenue, MD 337 for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 36.6 miles on I 95. At current regular gas prices, budget about $8.37 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 1h 15m. Total distance: 50.5 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

1h 15m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (78%). Some complex stretches to watch for.

Drive Character

This is a 1h 15m highway drive covering 50.5 miles, with most of the trip on I 95 and Ingleside Avenue. The longest continuous stretch is about 36.6 miles on I 95.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 21 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 95 is the longest continuous segment at about 36.6 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 95 and Ingleside Avenue. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 7.3 miles in near MD 166.

Driving Effort 8/10

Demanding - plan breaks and stay ahead of the key maneuvers

Balances navigation complexity with total wheel time.

This drive requires moderate attention. Across 50.5 miles you will encounter 13 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: at 7.3 miles (MD 166): Lane positioning matters here; at 8 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 45.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 13 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

6
7.3 mi into trip | ~17m in | MD 166

Turn left onto MD 166 toward I 195 East

Lane positioning matters here

Use the left lane. Toward I 195 East
7
8 mi into trip | ~18m in

Take the exit toward I 95 South: Washington

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Exit 4B Toward I 95 South: Washington
8
45.1 mi into trip | ~1h 5m in

Take the exit toward MD 337: Andrews Air Force Base Main Gate, Morningside

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 9 Toward MD 337: Andrews Air Force Base Main Gate...
6
45.3 mi into trip | ~1h 5m in | MD 337 / Forestville Road

Turn right onto MD 337 / Forestville Road

Lane positioning matters here

Use the straight / left / right lanes.
7
48.8 mi into trip | ~1h 12m in

Take the exit toward Old Branch Avenue, Kirby Road

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Toward Old Branch Avenue, Kirby Road

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Gwynn Oak, MD to Clinton, MD, road signs begin pointing toward Morningside along the way.

Morningside

45.1 mi in | ~1h 5m

Main Roads

Road Distance Duration
I 95 36.6 mi 45m
Ingleside Avenue 2.8 mi 5m
MD 337 2.2 mi 4m
Old Branch Avenue 1.5 mi 2m
West Forest Park Avenue 1.4 mi 3m
South Rolling Road 1.2 mi 2m
Bloomsbury Avenue 0.9 mi 2m
Hillsdale Road 0.9 mi 2m
Longest stretch: I 95 — 36.6 mi, about 45m

Turn-by-Turn Driving Directions

Step-by-step road directions between Gwynn Oak, MD and Clinton, MD.

1

Start on this road

60 ft · 6 sec · this road
2

Turn right onto Haddon Avenue

178 ft · 11 sec · Haddon Avenue
3

Turn left onto Hillsdale Road

0.9 mi · 2 min · Hillsdale Road
4

Turn slight right onto West Forest Park Avenue

1.4 mi · 3 min · West Forest Park Avenue
5

Continue on Ingleside Avenue

2.8 mi · 5 min · Ingleside Avenue
Use the left / straight lanes.
6

Continue on Bloomsbury Avenue

0.9 mi · 2 min · Bloomsbury Avenue
7

At end of road, turn left onto MD 166

0.9 mi · 2 min · South Rolling Road
8

Continue on MD 166

0.3 mi · 39 sec · South Rolling Road
Use the straight lane.
9

Turn left onto MD 166

0.7 mi · 46 sec · MD 166
Toward I 195 East Use the left lane.
10

Take the exit

0.5 mi · 1 min
Exit 4B Toward I 95 South: Washington Use the slight right lane.
11

Merge onto I 95

37 mi · 45 min · I 95
Use the straight / slight right lanes.
12

Take the exit

0.2 mi · 34 sec
Exit 9 Toward MD 337: Andrews Air Force Base Main Gate, Morningside Use the straight / slight right lanes.
13

Turn right onto MD 337

426 ft · 12 sec · Forestville Road
Use the straight / left / right lanes.
14

Turn slight right onto MD 337

2.2 mi · 4 min · MD 337
Toward MD 337 South
15

Turn left

0.5 mi · 39 sec
Toward MD 5 South: Waldorf
16

Merge onto MD 5

0.7 mi · 45 sec · Branch Avenue
17

Take the exit

0.2 mi · 25 sec
Toward Old Branch Avenue, Kirby Road Use the straight / slight right lanes.
18

Turn straight onto Old Branch Avenue

1.5 mi · 2 min · Old Branch Avenue
19

Turn right onto MD 223

68 ft · 7 sec · Piscataway Road
20

Turn left

43 ft · 3 sec
21

Arrive at destination

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 25.3 mi from Gwynn Oak, MD · 40m into the drive

census-designated place in Montgomery County, Maryland, United States, Suburb of Washington DC

Mid-route town

Meal stop

Kemp Mill, MD

25 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Catonsville, MD

Fuel and coffee

A short stop after about 11 miles helps settle the day before fatigue starts building.

Kemp Mill, MD

Meal break

The midpoint is around 25.3 miles from Gwynn Oak, MD, which is a good place for a longer meal and fuel stop.

Arriving in Clinton, MD

The final approach into Clinton, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$8.37 one way

$16.74 round trip

$4.21/gal 25.4 MPG avg 18 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $9.17 $18.34
premium $4.93 $9.79 $19.59
diesel $5.61 $11.15 $22.30

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$8

Estimated CO2 emission: 17.7 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $5 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 15.1 0 $5.30 $2.42
Efficient EV 12.6 0 $4.42 $2.02
EV Truck/SUV 20.2 0 $7.07 $3.23

Gas CO2

18 kg

EV CO2

6 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 16, 2026

Origin

Gwynn Oak, MD

Afternoon in Gwynn Oak on Thursday

Local time

3:38 PM

EDT

Current temp

91°F

Mostly Sunny

SW 8 to 12 mph 3% chance Live forecast

Destination

Clinton, MD

Afternoon in Clinton on Thursday

Local time

3:38 PM

EDT

Current temp

50°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

41 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 15m on the road

The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Gwynn Oak, MD to Clinton, MD covers 50.5 miles and takes about 1h 15m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 95, Ingleside Avenue, MD 337. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 25.3 miles from Gwynn Oak, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $8.37 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 50.5 miles you will encounter 13 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: at 7.3 miles (MD 166): Lane positioning matters here; at 8 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 45.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
On the drive from Gwynn Oak, MD to Clinton, MD, road signs begin pointing toward Morningside along the way.
Yes. Nearby national parks include Chesapeake & Ohio Canal National Historical Park.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Gwynn Oak, MD or browse trips ending in Clinton, MD.

Looking for more statewide routes? Browse MD road trips.

Explore maps for Gwynn Oak, MD or Clinton, MD on MapSof.net.