Skip to main content

Trip from Randallstown, MD to Saint Charles, MD

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 18, 2026 · Editorial standards

Drive Time

1h 32m

Distance

63.9 mi

103 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$11

one way

EV Charging

Unknown

Best Time to Leave

Save up to 21 min
4 AM
1h 26m ★
6 AM
1h 33m
8 AM
1h 47m
10 AM
1h 38m
12 PM
1h 36m
3 PM
1h 38m
5 PM
1h 46m
8 PM
1h 28m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

census-designated place in Maryland, United States

Randallstown, MD

Wikimedia Commons

Downtown Saint Charles, MD, MD

Saint Charles, MD

RDNE Stock project

Trip Overview

The drive from Randallstown, MD to Saint Charles, MD covers 63.9 miles and takes about 1h 32m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Crain Highway, MD 3, Baltimore Beltway for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 20.8 miles on Crain Highway. At current regular gas prices, budget about $10.59 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Midpoint

32 miles from Randallstown, MD

A natural place for your longest stop of the day , about 45m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 1h 32m. Total distance: 63.9 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

1h 32m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (42%). Straightforward navigation.

Drive Character

The drive from Randallstown, MD to Saint Charles, MD covers 63.9 miles and takes about 1h 32m, using a mix of highways and local roads.

Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 8 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Crain Highway is the longest continuous segment at about 20.8 miles.

How Hard Is This Drive?

This route mixes highway mileage with some local-road sections near the start or finish. There are only a few real navigation decisions along the way. The trickiest moment comes around 2.9 miles in.

Driving Effort 4/10

Easy - simple navigation with a manageable amount of wheel time

Balances navigation complexity with total wheel time.

This is a straightforward 1h 32m drive. You will face about 4 decision points, but nothing that requires special attention if you follow navigation.

Where does it get tricky?

The main spots that need attention: at 2.9 miles: Lane positioning matters here; at 3.3 miles (I 695 / Baltimore Beltway): Merge point - match speed before joining. Lane positioning matters here; at 15.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.

Critical Maneuvers

4 of 4 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
2.9 mi into trip | ~6m in

Take the ramp toward I 695 South: Glen Burnie

Lane positioning matters here

Use the straight / right lanes. Toward I 695 South: Glen Burnie
5
3.3 mi into trip | ~7m in | I 695 / Baltimore Beltway

Merge onto I 695 / Baltimore Beltway

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
8
15.2 mi into trip | ~23m in

Take the exit toward I 97 South: Annapolis, Bay Bridge

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight left lane. Exit 4 Toward I 97 South: Annapolis, Bay Bridge
8
24.9 mi into trip | ~34m in | MD 3

Keep slight right at fork onto MD 3 toward MD 32 West, MD 3 South: Bowie, Crofton

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the left lane. Toward MD 32 West, MD 3 South: Bowie, Crofton

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Randallstown, MD to Saint Charles, MD, road signs begin pointing toward Crofton along the way.

Crofton

24.9 mi in | ~34m | via MD 3

Main Roads

Road Distance Duration
Crain Highway 20.8 mi 30m
MD 3 18.2 mi 26m
Baltimore Beltway 11.9 mi 16m
I 97 8.9 mi 10m
Liberty Road 2.9 mi 6m
Longest stretch: Crain Highway — 20.8 mi, about 30m

Turn-by-Turn Driving Directions

Step-by-step road directions between Randallstown, MD and Saint Charles, MD.

1

Start on MD 26

2.9 mi · 6 min · Liberty Road
2

Take the ramp

0.4 mi · 53 sec
Toward I 695 South: Glen Burnie Use the straight / right lanes.
3

Merge onto I 695

12 mi · 16 min · Baltimore Beltway
Use the straight / slight right lanes.
4

Take the exit

0.8 mi · 1 min
Exit 4 Toward I 97 South: Annapolis, Bay Bridge Use the slight left lane.
5

Continue on I 97

8.9 mi · 10 min · I 97
Use the straight lane.
6

Keep slight right at fork onto MD 3

18 mi · 26 min · MD 3
Toward MD 32 West, MD 3 South: Bowie, Crofton Use the left lane.
7

Continue on US 301

21 mi · 30 min · Crain Highway
Use the straight lane.
8

Arrive at destination

US 301

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 32 miles from Randallstown, MD, or about 45m into the drive.
The longest continuous stretch on this route runs about 20.8 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 14 miles or 21m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 32 miles or 45m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 18m

Traffic, exits, and arrival timing usually matter more near Saint Charles, MD than in the middle of the route.

Before You Leave

+

Open the route before leaving Randallstown, MD so your first major turns are already loaded.

Day 1

Settle into the route from Randallstown, MD

This is one driving day of about 63.9 miles and 1h 32m.

Your first comfortable stop window is around 14 miles from Randallstown, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
The longest stretch is on Crain Highway for about 20.8 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 32 mi from Randallstown, MD · 45m into the drive

city in Prince George's County, Maryland, United States

Mid-route town

Meal stop

Bowie, MD

32 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Glen Burnie, MD

Fuel and coffee

A short stop after about 14 miles helps settle the day before fatigue starts building.

Crofton, MD

Meal break

The midpoint is around 32 miles from Randallstown, MD, which is a good place for a longer meal and fuel stop.

Arriving in Saint Charles, MD

The final approach into Saint Charles, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$10.59 one way

$21.19 round trip

$4.21/gal 25.4 MPG avg 22 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $11.60 $23.21
premium $4.93 $12.39 $24.79
diesel $5.61 $14.11 $28.22

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$11

Meals

$25–$50

Total

$36–$61

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 22.4 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $7 in charging · 0 stops · 68% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 19.2 0 $6.71 $3.07
Efficient EV 16 0 $5.59 $2.56
EV Truck/SUV 25.6 0 $8.95 $4.09

Gas CO2

22 kg

EV CO2

7 kg (68% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 17, 2026

Origin

Randallstown, MD

Late night in Randallstown on Saturday

Local time

3:26 AM

EDT

Current temp

74°F

Unavailable

Live forecast

Destination

Saint Charles, MD

Late night in Saint Charles on Saturday

Local time

3:26 AM

EDT

Current temp

75°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

1 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 32m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Randallstown, MD to Saint Charles, MD covers 63.9 miles and takes about 1h 32m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Crain Highway, MD 3, Baltimore Beltway. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 32 miles from Randallstown, MD. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $10.59 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

This is a straightforward 1h 32m drive. You will face about 4 decision points, but nothing that requires special attention if you follow navigation.

The main spots that need attention: at 2.9 miles: Lane positioning matters here; at 3.3 miles (I 695 / Baltimore Beltway): Merge point - match speed before joining. Lane positioning matters here; at 15.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.

On the drive from Randallstown, MD to Saint Charles, MD, road signs begin pointing toward Crofton along the way.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Randallstown, MD or browse trips ending in Saint Charles, MD.

Looking for more statewide routes? Browse MD road trips.